Introduction
This manual provides essential information for the safe and efficient operation of your Renogy 2000W 12V Pure Sine Wave Power Inverter. This device converts 12V DC battery power into 230V AC household power, suitable for a wide range of electronic devices and appliances. Please read this manual thoroughly before installation and use, and retain it for future reference.
Image: The Renogy 2000W Pure Sine Wave Power Inverter, a black rectangular unit with blue accents, shown in a typical outdoor setting.
Коопсуздук нускамалары
- Электр коопсуздугу: Always ensure proper grounding. Do not expose the inverter to water, rain, or excessive moisture. Operate in a well-ventilated area.
- Батарея туташуу: Connect the inverter directly to a 12V deep cycle battery. Ensure correct polarity (positive to positive, negative to negative). Incorrect connections can damage the inverter and battery.
- Жүктөө жөндөмдүүлүгү: Do not exceed the inverter's continuous power rating of 2000W or peak power rating of 4000W. Overloading can cause damage and pose a fire hazard.
- Вентиляция: Ensure adequate airflow around the inverter to prevent overheating. Do not block ventilation openings.
- Балдар жана үй жаныбарлары: Инверторду балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
- Тейлөө: Disconnect all power before performing any maintenance or cleaning.
Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- Renogy 2000W 12V 220V Pure Sine Wave Inverter x 1
- 20 mm² Cable x 1
- Remote Control (cable length: approximately 3m) x 1
Image: A close-up of a high-quality copper cable, indicating the type of accessory included for optimal performance.
Продукт өзгөчөлүктөрү
- Powerful DC-AC Conversion: Provides 2000W continuous power (4000W peak) from 12V DC to 230V AC with 90% conversion efficiency.
- Pure Sine Wave Technology: Delivers stable, clean power comparable to grid electricity, protecting sensitive electronics and extending their lifespan.
- Комплекстүү коргоо системасы: Features LED indicators for under-voltage, ашыкча томtage, over-temperature, overload, and short-circuit protection. Includes a cooling fan and internal DC fuse for enhanced safety.
- Integrated Grid Priority Circuit: Ensures continuous 230V power by automatically switching between shore power and inverter power.
- Кеңири колдонуу диапазону: Suitable for PCs, laptops, tablets, medical devices, and various household appliances.
- Колдонуучуга ыңгайлуу дизайн: Equipped with 2 AC outlets and a remote control for convenient operation.
- Туруктуу курулуш: Бекем металл сasing protects against impacts. High-speed fans maintain optimal operating temperature.
Сүрөт: алдыңкы view of the Renogy 2000W Inverter, highlighting the two AC outlets and the main power switch.
Image: The Renogy 2000W Inverter displaying icons for its six electronic protection features, including over-temperature, short circuit, and overload protection.
Сүрөт: Арткы view of the inverter, showing the dual cooling fans designed for powerful heat dissipation and efficient system operation.
Жайгашуу
Орнотуу жери
Install the inverter in a dry, cool, and well-ventilated area. Avoid direct sunlight, heat sources, and moisture. Ensure sufficient clearance around the unit for proper airflow.
Зымдар диаграммасы
Follow the diagram below for correct connection of the inverter to your solar power system. Ensure all connections are secure and properly insulated.
Image: A detailed wiring diagram illustrating the connections between solar panels, charge controller, battery, inverter, and various DC/AC loads in a solar power system.
Батареяга туташуу
- Ensure the inverter is switched OFF.
- Connect the supplied 20 mm² cable to the DC input terminals on the rear of the inverter. Ensure positive (+) is connected to positive and negative (-) to negative.
- Connect the other end of the cables to your 12V deep cycle battery. Use appropriate fuses or circuit breakers as recommended for your system.
- Байланыштардын бошоп калышына жана доға пайда болушуна жол бербөө үчүн бардык туташууларды бекем бекитиңиз.
AC жүктөрдү туташтыруу
Plug your AC appliances directly into the 230V AC outlets on the front of the inverter. Ensure the total power consumption of your appliances does not exceed 2000W.
Иштөө нускамалары
Күйгүзүү/өчүрүү
- Ensure all DC and AC connections are correctly made.
- Press the main power switch on the front of the inverter to the 'ON' position. The indicator lights will illuminate.
- To power off, switch the main power switch to the 'OFF' position.
Алыстан башкарууну колдонуу
The included remote control allows you to power the inverter on or off from a distance, which is convenient when the inverter is installed in an inaccessible location.
Image: The remote control unit for the Renogy inverter, featuring an on/off switch and indicator lights, mounted on a wooden surface.
- Connect the remote control cable to the designated port on the inverter.
- Use the switch on the remote control to turn the inverter ON or OFF.
Индикатор жарыктары
The inverter features LED indicators that provide status information and alert you to potential issues:
- Жашыл LED: нормалдуу иштешин керсетет.
- Кызыл LED: Indicates a fault or protection mode (e.g., overload, over-temperature, low voltage). Refer to the Troubleshooting section for details.
Техникалык тейлөө
- Тазалоо: Инвертордун сыртын мезгил-мезгили менен кургак чүпүрөк менен тазалап туруңуз. Желдетүүчү тешиктердин чаң жана таштандылардан тазаланганын текшериңиз. Суюк тазалоочу каражаттарды колдонбоңуз.
- Туташуу текшерүү: Бардык туруктуу жана өзгөрмө ток туташууларынын бекемдигин жана дат басышын үзгүлтүксүз текшерип туруңуз. Бош туташууларды бекемдеңиз.
- Батареянын ден соолугу: Ensure your battery is well-maintained and charged to prolong its lifespan and the inverter's performance.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Инвертор күйбөйт | Loose battery connection; Low battery voltage; Blown fuse | Check battery connections; Charge battery; Replace fuse (if applicable and safe to do so) |
| AC чыгышы жок | Ашыкча жүктөө; Ашыкча температура; Төмөн/Жогорку киргизүү көлөмүtage | жүктү азайтуу; Инверторду муздатууга уруксат бериңиз; Батареянын көлөмүн текшериңизtage |
| Кызыл LED индикатору күйүк | Overload; Over-temperature; Input voltage out of range; Short circuit | Identify and resolve the specific fault condition. Disconnect loads, check connections, allow cooling. |
| Желдеткич иштебейт | Normal operation (fan activates under load/temperature); Fan malfunction | Ensure inverter is under load or operating at higher temperatures. If no fan operation under load, contact support. |
Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Бренд | Renogy |
| Модель аты | R-INVT-PUH1-201235-DE/EU |
| Күч (үзгүлтүксүз) | 2000 Ватт |
| Чокусу чыгаруу күчү | 4000 Ватт |
| Киргизүү көлөмүtage | 12 вольт (ток) |
| Output Voltage | 230 вольт (AC) |
| Output Waveform | Таза синус толкуну |
| Жыштык | 50 Гц |
| Жалпы электр розеткалары | 2 |
| Өлчөмдөрү (L x W x Y) | 48.2L x 22W x 9.2H см |
| Элемент Салмагы | 4.8 килограмм |
| Сунушталган Колдонуулар | Powering sensitive electronics during camping or outdoor activities, medical devices, household appliances during travel or off-grid living. |
| Сертификаттар | ETL, CE, UKCA, RoHS, ECE R10 |
Кепилдик жана колдоо
The Renogy 2000W 12V Pure Sine Wave Power Inverter comes with a 2 жылдык кепилдик covering materials and manufacturing defects.
For technical support, warranty claims, or any product-related inquiries, please contact Renogy customer service directly. If you encounter any issues, especially transport-related damage, please reach out via buyer message for assistance with replacement or partial refund options.
Please visit the official Renogy webсайтына кириңиз же эң акыркы байланыш маалыматы үчүн сатып алуу документтериңизди караңыз.