Brifit Criacr Digital Hygrometer Thermometer User Manual

Introduction

The Brifit Criacr Digital Hygrometer Thermometer is designed to monitor both indoor and outdoor temperature and humidity levels in real-time. This device features a large LCD display for easy readability and offers flexible installation options. This manual provides essential information for the proper setup, operation, and maintenance of your device.

Пакеттин мазмуну

• 1 x Indoor Outdoor Thermometer Hygrometer (Main Unit)
• 1 x Thermo-Hygrometer Transmitter (Remote Sensor)
• 1 x User Manual

Продукт өзгөчөлүктөрү

• Indoor & Outdoor Monitoring: Measures temperature and humidity values for both indoor and outdoor environments simultaneously.
• Чоң LCD дисплей: Features a clear, large-number LCD screen for easy reading of data.
• Зымсыз берүү: Equipped with a wireless transmitter (433MHz frequency) for a transmission distance of 30-100m (98-328ft) in open air.
• Кеңири өлчөө диапазону:
  • Indoor Temperature: 0°C to 60°C (32°F to 140°F)
  • Outdoor Temperature: -40°C to 60°C (-40°F to 140°F)
  • Нымдуулук: 10% - 99%
• Бирдикти которуштуруу: Цельсий (°C) жана Фаренгейт (°F) бирдиктеринин ортосунда оңой которулуңуз.
• Ийкемдүү орнотуу: Designed with a wall hanger and a retractable stand for tabletop placement or wall mounting.

Жайгашуу

1. Батареяны орнотуу

The main unit and remote sensor require batteries (not included).

• Негизги блок: Requires 2 x AAA 1.5V Alkaline batteries.
• Алыстан сенсор: Requires 2 x AAA 1.5V Alkaline or Lithium batteries.

Open the battery compartment on the back of each device and insert the batteries, ensuring correct polarity (+/-).

Сүрөт: Артка view of the main unit, highlighting the battery compartment, hanging hole, and switch button.

2. Unit Selection (°C/°F)

Before installing batteries, or if the device is already working, you can switch between Celsius (°C) and Fahrenheit (°F). The default unit is Celsius.

• Locate the switch button on the top of the main unit.
• Press this button to toggle between °C and °F.
• Эскертүү: If the device is already working, you may need to disassemble and re-install the batteries after switching the unit for the change to take effect.

3. Сенсордун жайгашуусу

Place the main unit indoors and the remote sensor outdoors. Ensure the remote sensor is placed in a location protected from direct sunlight and rain for accurate readings and extended lifespan.

The wireless signal penetration is strong, but avoid placing the sensor behind large metal objects or thick walls that could obstruct the signal.

Image: Illustration of the main unit placed indoors and the remote sensor placed outdoors, demonstrating wireless communication.

Сүрөт: Мисamples of flexible installation, including tabletop placement using the retractable stand and wall mounting using the hanging hole.

Иштөө нускамалары

1. Дисплейди окуу

The large LCD screen displays both indoor and outdoor temperature and humidity readings. Data refreshes automatically every 60 seconds. Allow approximately 30 minutes for the sensor to stabilize after initial setup.

Сүрөт: деталдуу view of the LCD display, indicating the positions for outdoor temperature, outdoor humidity, indoor temperature, and indoor humidity readings.

• Тышкы температура: Displays the temperature measured by the remote sensor.
• Сырткы нымдуулук: Displays the humidity measured by the remote sensor.
• Ички температура: Displays the temperature measured by the main unit.
• Ички нымдуулук: Displays the humidity measured by the main unit.

2. Трансмиссия диапазону

The remote sensor can transmit data up to 100 meters (328 feet) in open air. Actual range may vary depending on obstacles such as walls, floors, and electronic interference.

Техникалык тейлөө

1. Жалпы кам көрүү

• Аппаратты жумшак, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Do not immerse the product in water, as this will cause damage.
• Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity for prolonged periods.

2. Батареяны алмаштыруу

Replace batteries when the display becomes dim or readings become inconsistent. The battery life for the base station is a minimum of 24 months.

• Always replace all batteries in a unit at the same time.
• Use new batteries of the recommended type (AAA 1.5V Alkaline for main unit; AAA 1.5V Alkaline or Lithium for remote sensor).
• Эски батареяларды жергиликтүү эрежелерге ылайык таштаңыз.

Проблемаларды чечүү

• Дисплей жок же күңүрт дисплей: Check battery polarity. Replace batteries if they are low.
• Сыртта окууга тыюу салынат:
  • Ensure the remote sensor batteries are correctly installed and charged.
  • Verify the remote sensor is within the transmission range (up to 100m/328ft in open air).
  • Relocate the remote sensor or main unit to minimize interference from electronic devices or large metal objects.
  • Try re-pairing the sensor with the main unit (if applicable, though not explicitly mentioned in product description, it's a common troubleshooting step for wireless devices).
• Туура эмес окуулар:
  • Ensure the remote sensor is not in direct sunlight or exposed to rain.
  • Allow 30 minutes for stabilization after setup or battery replacement.
  • Compare readings with another known accurate thermometer/hygrometer to verify.

Маанилүү эскертүү: Never immerse the product in water. Always ensure the Celsius/Fahrenheit unit is set correctly before or immediately after battery installation.

Техникалык шарттар

Image: Dimensions of the main display unit and the wireless remote sensor.

Кепилдик жана колдоо

Specific warranty information is not provided in the product description. For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official Brifit webсайт.

For further assistance, please contact Brifit customer service.