Jectse Jectseh4tnewb30y-03
Jectse Timer Soft Starter Instruction Manual
Model: Jectseh4tnewb30y-03
1. Продукт бүтүп калдыview
The Jectse Timer Soft Starter is a versatile delay relay motor starter designed for efficient motor start control. It features adjustable delay ranges and wide working voltage compatibility, making it suitable for various industrial and scientific applications.
Сүрөт 1: Алдыңкы view of the Jectse Timer Soft Starter, showing the control knobs and indicator lights.
2. Негизги өзгөчөлүктөрү
- Adjustable Start Delay (T1): Range from 0.1 seconds to 10 minutes, set via knob.
- Adjustable Conversion Time (T2): Range from 0.1 seconds to 1 second, set via knob.
- Wide Working Voltage: Supports AC/DC 12V to 240V.
- LED көрсөткүчтөрү: Clearly shows the working status of the relay.
- Компакт дизайн: Super small size, only 18mm wide, designed for 35mm rail mounting.
Figure 2: The soft starter unit highlighting its compact size and adjustable settings.
3. Коопсуздук маалыматы
Please read and understand all safety instructions before installing or operating this device. Failure to follow these instructions may result in electrical shock, fire, or serious injury.
- Орнотуудан же зымдардан мурун электр энергиясы өчүрүлгөнүн текшериңиз.
- Орнотуу квалификациялуу кызматкерлер тарабынан гана аткарылышы керек.
- Туура томду текшериңизtage and current ratings before connecting to a power source.
- Аппаратты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
- Зарыл болгон жерде туура жерге туташтырууну камсыз кылуу.
4. Пакеттин мазмуну
Пакетке төмөнкүлөр кирет:
- 1 x Jectse Timer Soft Starter
5. Орнотуу жана орнотуу
The Jectse Timer Soft Starter is designed for 35mm DIN rail mounting. Follow these steps for proper installation:
- Ensure all power to the circuit is turned off at the main breaker.
- Mount the soft starter securely onto a standard 35mm DIN rail. The red clips on the side facilitate easy mounting and removal.
- Connect the power supply to terminals A1 and A2. The device supports AC/DC 12-240V.
- Connect the motor control wiring to the output terminals (15, 16, 18, 25, 26, 28) as per your application's wiring diagram. Refer to the diagram on the side of the unit for specific connections.
- Ensure all wiring connections are secure and meet the specified wiring capacity (1x2.5mm² or 2x 1.5mm²).
- Кубатты калыбына келтирүүдөн мурун бардык байланыштарды эки жолу текшериңиз.
Сүрөт 3: Жакын пландан view of the wiring terminals and the integrated wiring diagram on the unit.
4-сүрөт: Каптал view illustrating the red clips for DIN rail mounting.
6. Иштөө нускамалары
Once installed and powered, the Timer Soft Starter operates based on its configured delay settings.
- Setting Start Delay (T1): Use the knob labeled 'T1' to adjust the initial start delay from 0.1 seconds to 10 minutes. This delay determines how long the soft starter waits before initiating the motor start sequence.
- Setting Conversion Time (T2): Use the knob labeled 'T2' to set the conversion time from 0.1 seconds to 1 second. This time is crucial for the smooth transition during the motor's soft start phase.
- LED көрсөткүчтөрү:
- A green LED indicates the power status (Un).
- A red LED indicates the relay's working status (R).
Видео 1: Бүттүview of the Jectse Timer Soft Starter, demonstrating its features and appearance.
7. Техникалык тейлөө
The Jectse Timer Soft Starter is designed for long-term reliability with minimal maintenance. However, regular checks can ensure optimal performance:
- Зымдардын туташууларынын бекемдигин жана эскирүү же дат басуу белгилерин мезгил-мезгили менен текшерип туруңуз.
- Агрегатты таза жана чаңдан жана калдыктардан таза кармаңыз. Тазалоо үчүн кургак, жумшак чүпүрөктү колдонуңуз.
- Иштөө чөйрөсү белгиленген температуранын жана нымдуулуктун чегинде сакталышын камсыз кылыңыз.
- Түзмөктү өз алдынча ачууга же оңдоого аракет кылбаңыз. Квалификациялуу тейлөө кызматкерлерине кайрылыңыз.
8. Кыйынчылыктарды
If you encounter issues with your Timer Soft Starter, consider the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Unit not powering on (Green LED off) | No power supply; Incorrect wiring; Faulty unit. | Check power source; Verify A1/A2 wiring; Contact support if power is present and wired correctly. |
| Motor not starting after delay | Incorrect output wiring; Relay not activating; Motor issue. | Check output terminals (15, 16, 18, 25, 26, 28) connections; Observe red LED for relay status; Test motor independently. |
| Delay times are inaccurate | Knob settings incorrect; Environmental factors. | Re-adjust T1 and T2 knobs carefully; Ensure stable operating environment. |
If the problem persists after attempting these solutions, please contact Jectse customer support.
9. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Type | AC/DC 12V~240V |
| Rated Control Power Supply Voltage | AC/DC 12-240V (50/60Hz) |
| Энергияны керектөө | AC 0.7-3VA / DC 0.5-1.7W |
| Starting Delay (T1) | 0.1s - 10min |
| Conversion Delay (T2) | 0.1s - 1s |
| Орнотуу тактыгы | 5% |
| Тактыгын кайталоо | 0.2% |
| Чыгуу | Two sets of conversion contacts 16A/AC250VAC |
| Minimum Switching Power | 500мВт |
| Механикалык жашоо | 1 x 10,000,000 cycles |
| Electrical Life (Load) | 1,000,000 XNUMX цикл |
| Убакытты кайра коюу | 200ms максимум |
| Жумушчу чөйрөнүн температурасы | -20°C ~ 55°C |
| Сактоо жана ташуу температурасы | -35°C ~ 75°C |
| Орнотуу | 35 мм темир жол орнотуу |
| Коргоо деңгээли | IP20 |
| Орнотуу бийиктиги | 2000 метр |
| Булгануу деңгээли | 2 |
| Зымдарды өткөрүү кубаттуулугу | 1x2.5mm² or 2x 1.5mm² |
| Өлчөмдөр | 90 x 18 x 64 мм (3.5 x 0.7 x 2.5 дюйм) |
| Стандартка ылайыктуу | GB14048.5.IEC/EN 60255-1 |
| Салмагы | Болжол менен. 96г (3.4oz) |
10. Кепилдик жана колдоо
For warranty information or technical support, please contact Jectse customer service. Keep your purchase receipt for any warranty claims.
Өндүрүүчү: Jectse
Модель номери: Jectseh4tnewb30y-03
Биринчи жеткиликтүү болгон күнү: 4-май, 2019-жыл
Тектеш документтер - Jectseh4tnewb30y-03
 |
GE Security INT-03 коопсуздук мониторунун релесинин маалымат баракчасы жана мүнөздөмөлөрү GE Security INT-03 Integrity Series коопсуздук мониторунун релеси үчүн кеңири маалымат баракчасы. Техникалык мүнөздөмөлөрдү, орнотуу көрсөтмөлөрүн, зымдардын схемаларын жана өнөр жайлык коргоочу блокировкалоо колдонмолору үчүн коопсуздук функцияларын камтыйт. |
 |
VKL Electric VTP-03 Electronic Socket Timer: User Manual & Setup Guide Detailed user manual for the VKL Electric VTP-03 electronic socket timer (Art. 1007318). Covers installation, programming, operation modes (ON, OFF, AUTO), countdown timer, technical specifications, safety precautions, and warranty information for automatic control of household appliances. |
 |
Intellijel Sealegs: Multi-Modeled Stereo Character Delay with Reverb User Manual Comprehensive user manual for the Intellijel Sealegs, a multi-modeled stereo character delay with reverb module. Learn about installation, front panel controls, delay functions, modulation, character settings, firmware updates, and technical specifications. |
 |
AstroStart Series 1100 and 2100 User Manual User manual for AstroStart Series 1100 and 2100 remote engine starter systems, detailing operation, commands, safety, and troubleshooting. |
 |
TRU COMPONENTS Current Monitoring Relay TC-GRI8-03 & TC-GRI8-04 Data Sheet Comprehensive data sheet for TRU COMPONENTS Current Monitoring Relays, models TC-GRI8-03 and TC-GRI8-04. Details applications, function features, technical specifications, panel and function diagrams, wiring, and dimensions for these DIN rail mountable relays. |
 |
novotegra Insertion System Brickwork Facade Mounting Instructions Comprehensive mounting instructions for the novotegra Insertion System designed for brickwork facades, detailing safety, general conditions, tools, components, installation steps, and maintenance. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.