Ohaus CR5200 Compass Series Portable Balance User Manual

1. Киришүү

This manual provides instructions for the proper setup, operation, and maintenance of your Ohaus CR5200 Compass Series Portable Balance. Please read this manual thoroughly before using the balance to ensure correct operation and to prevent damage.

The Ohaus CR5200 is a portable digital balance designed for accurate weighing with a capacity of 5200 grams and a readability of 1 gram. It supports multiple weighing units including grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).

Сүрөт 1.1: Жогорку view of the Ohaus CR5200 Compass Series Portable Balance, showing the display and control buttons.

2. Коопсуздук маалыматы

• Тең салмактуулукту туруктуу, тегиз жерде, титирөөсүз жана шамалсыз иштетиңиз.
• Балансты өтө жогорку температурага, нымдуулукка же түз күн нуруна дуушар кылбаңыз.
• Do not overload the balance beyond its maximum capacity of 5200 grams.
• Балансты таза жана чаң менен таштандылардан таза кармаңыз.
• Use only the specified power source (3 AA batteries or compatible AC adapter).

3. Орнотуу

3.1 Пакеттен чыгаруу

Carefully remove the balance from its packaging. Inspect the balance for any signs of damage. Retain the packaging for future transport or storage.

3.2 Powering the Balance

The Ohaus CR5200 can be powered by three AA alkaline batteries or an external AC adapter (not included, but compatible with the side power port).

Батарея орнотуу:

1. Locate the battery compartment on the underside of the balance.
2. Батарея уясынын капкагын ачыңыз.
3. Insert three AA alkaline batteries, ensuring correct polarity (+/-).
4. Батарея уясынын капкагын бекем жабыңыз.

Сүрөт 3.1: Астыңкы бети view of the balance with the battery compartment open, showing three AA batteries installed.

Тышкы электр туташуу:

If using an AC adapter, connect it to the power input port located on the side of the balance. Ensure the adapter meets the specified voltage and current requirements (e.g., 12V 0.5A).

Сүрөт 3.2: Каптал view of the balance, highlighting the external power input port.

3.3 Орнотуу

Place the balance on a firm, level, and stable surface. Avoid locations near air vents, windows, or equipment that generates vibrations or electromagnetic interference.

4. Иштөө нускамалары

4.1 Күйгүзүү/өчүрүү

• Күйгүзүү үчүн: басыңыз [ON/OFF] button. The display will show a self-test sequence and then settle at 0.0 g.
• Өчүрүү үчүн: басып, кармап туруңуз [ON/OFF] баскычын дисплей өчмөйүнчө басыңыз.

4.2 Selecting Weighing Units

The balance supports multiple weighing units: grams (g), ounces (oz), pounds:ounces (lb:oz), troy ounces (ozt), and pennyweights (dwt).

• To change the weighing unit: Press the [UNIT] button (often labeled with 'g' and an arrow). Each press cycles through the available units.

4.3 Тара Функциясы

The tare function allows you to zero out the weight of a container, so only the weight of the contents is measured.

1. Place the empty container on the weighing pan. The display will show its weight.
2. басыңыз [TARE/ZERO] button (often labeled with '→0←'). The display will reset to 0.0.
3. Идишке өлчөй турган материалды кошуңуз. Дисплейде материалдын таза салмагы көрсөтүлөт.

Image 4.1: The balance with an empty bowl on the weighing pan, ready for the tare function.

4.4 Негизги тараза

1. Ensure the balance is powered on and the display shows 0.0 in the desired weighing unit.
2. Таразага тартыла турган нерсени кылдаттык менен тараза казанынын ортосуна коюңуз.
3. Wait for the display to stabilize. The stable weight will be shown.
4. Буюмду көмөч казандан алып салыңыз.

4.5 Тышкы калибрлөө

The Ohaus CR5200 features external calibration. This process requires a known calibration weight (not included) to ensure accuracy. Refer to the full Ohaus CR Series manual for detailed calibration procedures specific to your model.

Image 4.2: The balance with a cylindrical calibration weight placed on the weighing pan.

5. Техникалык тейлөө

5.1 Тазалоо

• Баланстын сыртын жумшак, d менен сүртүңүзamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Ensure no liquids enter the balance housing or display.
• Keep the weighing pan clean to ensure accurate readings.

5.2 Батареяны алмаштыруу

When the battery indicator appears on the display, replace the three AA alkaline batteries as described in Section 3.2.

5.3 Сактоо

When not in use for extended periods, remove the batteries to prevent leakage. Store the balance in a dry, dust-free environment. The Ohaus CR5200 is designed for portability and can be stored in a protective case (if available).

Image 5.1: The Ohaus CR5200 balance shown alongside its protective carrying case.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please contact Ohaus customer service or visit the official Ohaus webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.