1. Киришүү
The Inkbird ITC308S is a reliable and easy-to-use temperature controller designed for precise temperature management in various applications, particularly aquariums. It features dual relay outputs for both heating and cooling devices, ensuring stable temperature control. The unit includes a fully submersible probe for accurate temperature readings in liquid environments.
2. Коопсуздук маалыматы
- Ensure the power supply matches the controller's requirements (110V for this model).
- Do not immerse the main controller unit in water. Only the probe is submersible.
- Кандайдыр бир тейлөө же орнотууну аткаруудан мурун ар дайым электр кубатын ажыратыңыз.
- Аппаратты балдардан жана үй жаныбарларынан алыс кармаңыз.
- Эгерде кандайдыр бир бөлүгү бузулса, аппаратты колдонбоңуз.
3. Пакеттин мазмуну
- ITC308S Temperature Controller Unit
- Submersible Temperature Probe
- Suction Cup for Probe Mounting
- User Manual
3.1-сүрөт: The Inkbird ITC308S Temperature Controller and its included accessories, packaged in a brown box.
4. Продукт бүтүп калдыview
The ITC308S features a main control unit with a dual LED display, showing both the present value (PV) and set value (SV) temperatures. It has dedicated outlets for heating and cooling devices, and a detachable submersible probe for accurate temperature sensing.
4.1-сүрөт: Бүттүview of the Inkbird ITC308S controller, showing the display, control buttons, power cord, and probe connection.
4.2-сүрөт: The dual power outlets, clearly marked for 'HEATING' and 'COOLING' devices.
4.3-сүрөт: The submersible temperature probe, designed for accurate readings in water, shown with its suction cup.
5. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | ITC-308S |
| Тtage | 120 вольт (AC) |
| Максималдуу чыгаруу жүктөө | 1200 Вт (110 В) |
| Температураны көзөмөлдөө режими | On/Off Control (Heating and Cooling) |
| Зонд түрү | Fully Submersible Aquarium Probe |
| Дисплей түрү | LED Dual Display |
| Материал | Пластик |
| Түс | Green, Gray and White |
6. Орнотуу нускамалары
- Пробду туташтыруу: Plug the submersible temperature probe into the designated port on the main controller unit. Use the provided suction cup to secure the probe inside your aquarium or water bath, ensuring it is fully submerged and away from direct heat sources or strong currents.
- Connect Heating/Cooling Devices: Plug your heating device (e.g., aquarium heater) into the 'HEATING' outlet and your cooling device (e.g., cooling fan) into the 'COOLING' outlet on the power strip. Ensure devices are rated within the controller's maximum output load (1200W).
- Күйгүзүү: Plug the main power cord of the ITC308S controller into a standard 110V AC power outlet. The LED display will illuminate, showing the current temperature (PV) and the set temperature (SV).
6.1-сүрөт: The submersible probe correctly placed within an aquarium, ensuring accurate temperature measurement.
7. Иштөө нускамалары
- View Current Temperature (PV): The upper LED display shows the current measured temperature (Process Value).
- View Set Temperature (SV): The lower LED display shows the desired set temperature (Set Value).
- Температураны коюу:
- басыңыз SET button once. The SV display will flash.
- колдонуу Өйдө (▲) or Төмөн (▼) каалаган температураны тууралоо үчүн баскычтар.
- Басыңыз SET жөндөөнү ырастоо жана сактоо үчүн кайра басыңыз же ал автоматтык түрдө сакталганча бир нече секунд күтө туруңуз.
- Heating/Cooling Indication: The 'HEATING' or 'COOLING' indicator lights will illuminate when the respective outlet is active.
- Температураны калибрлөө: Refer to the detailed instructions in the included paper manual for advanced settings like temperature calibration, differential settings, and alarm parameters. These settings allow fine-tuning of the controller's response.
- Ойготкучтар: The controller features over-temperature and sensor fault alarms. If an alarm triggers, the display will show an error code (e.g., 'HHH' for over-temperature, 'LLL' for under-temperature, 'ERR' for sensor fault) and an audible alert may sound. Address the issue promptly.
8. Техникалык тейлөө
- Пробду тазалоо: Regularly inspect and clean the submersible probe to prevent algae or mineral buildup, which can affect accuracy. Use a soft cloth and mild cleaning solution if necessary.
- Башкаруучу блок: Wipe the main controller unit with a dry, soft cloth. Do not use abrasive cleaners or immerse it in water.
- Кабелдик текшерүү: Periodically check all cables for any signs of wear, cuts, or damage. Replace if necessary.
9. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей бош | Электр энергиясы жок | кубат туташуу жана розетка текшерүү. |
| Температураны көрсөтүү туура эмес | Probe dirty or improperly placed; calibration needed | Clean probe, ensure proper submersion, perform temperature calibration. |
| Heating/Cooling device not turning on | Device not plugged in correctly; controller settings incorrect; device malfunction | Verify device connection to correct outlet, check set temperature and differential, test device independently. |
| Сигнализация тез-тезден үнү чыгат | Temperature outside set range; alarm limits too narrow | Adjust set temperature or alarm high/low limits. Ensure heating/cooling devices are functioning. |
| 'ERR' displayed | Сенсордун катасы | Check probe connection. If error persists, the probe may need replacement. |
10. Кепилдик жана колдоо
Inkbird products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official Inkbird webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.