Andoer HD-130 Macro LED Ring Flash Light User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Andoer HD-130 Macro LED Ring Flash Light. Please read this manual thoroughly before operating the device to ensure proper functionality and to prevent damage. Keep this manual for future reference.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз. Эгерде кандайдыр бир буюмдар жок же бузулуп калса, сатуучуга кайрылыңыз.

• 1 x Macro Ring Flash Head
• 1 x Power Control Unit with LCD Display
• 8 x Adapter Rings (40.5mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm)
• 3 x Translucent Diffusers (Blue, Orange, Transparent)
• 1 x Колдонуучунун колдонмосу (англис жана кытай тилдеринде)

Image: All components of the Andoer HD-130 Macro LED Ring Flash Light laid out, including the ring flash head, control unit, various adapter rings, and three diffusers.

Продукт бүттүview

The Andoer HD-130 Macro LED Ring Flash Light consists of a ring flash head and a separate power control unit with an LCD display. The control unit allows for easy adjustment of flash settings.

Image: The control unit of the Andoer HD-130 Macro LED Ring Flash, highlighting the LCD screen, control buttons (Pilot, Mode, Light, On/Off, Set), and output power adjustment buttons.

1. LCD Display Screen: Shows current settings and battery status.
2. Test Button (Pilot): Activates a test flash or pilot light.
3. Mode Switch Button (Mode): Cycles through flash modes.
4. LED Light Steady On Button (Light): Toggles the continuous LED light.
5. Power Switch (On/Off): Turns the unit on or off.
6. Output Power Adjustment: Adjusts flash intensity.
7. Control Button (Set): Confirms selections.
8. Output Power Adjustment Button (Right/Increase): Increases output power.
9. Hot Shoe Contact: Connects the control unit to the camera.

Жайгашуу

1. Батареяны орнотуу

The power control unit requires 4 AA batteries (not included). Ensure correct polarity when inserting batteries.

• Open the battery compartment cover on the back of the power control unit.
• Insert 4 AA batteries according to the polarity indicators (+/-).
• Батарея уясынын капкагын бекем жабыңыз.

Image: The battery compartment of the control unit opened, showing the slots for AA batteries. The ring flash attachment point is also visible.

2. Камерага орнотуу

Attach the power control unit to your camera's hot shoe and the ring flash head to your lens.

• Slide the hot shoe contact of the power control unit into your camera's hot shoe mount.
• Tighten the locking wheel on the control unit to secure it to the camera.
• Connect the coiled cable from the control unit to the ring flash head.

Image: The Andoer HD-130 Macro LED Ring Flash system fully assembled and mounted on a DSLR camera, with the control unit on the hot shoe and the ring flash head on the lens.

3. Attaching Adapter Rings

Select the appropriate adapter ring for your camera lens filter thread size.

• Identify your lens's filter thread size (usually printed on the front of the lens or lens cap).
• Screw the corresponding adapter ring onto your lens.
• Attach the ring flash head to the adapter ring by aligning the grooves and twisting until it locks into place.

4. Attaching Diffusers

The three translucent diffusers (transparent, orange, blue) can be used to modify the light output.

• Gently press the desired diffuser onto the front of the ring flash head until it clicks into place.
• To remove, gently pull the diffuser off.

Image: The transparent, orange, and blue diffusers for the ring flash, each displayed next to an example photo demonstrating the color temperature effect they produce.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү

басыңыз On/Off button on the power control unit to turn the flash on or off. The LCD screen will illuminate when powered on.

2. Режимди тандоо

басыңыз Mode button to cycle through available flash modes. Refer to the LCD display for the current mode. The unit supports various flash modes, including full flash and left/right flash.

3. Brightness/Power Adjustment

Use the output power adjustment buttons (labeled with arrows or +/-) to increase or decrease the flash intensity. The LCD display will show the current power level.

4. Left/Right Flash Function

This feature allows you to activate only the left or right side of the ring flash, creating directional lighting for enhanced dimensionality in macro shots. Select this function via the Mode button and adjust intensity as needed.

5. Pilot Light

басыңыз Пилот button to activate a continuous LED light. This can be used for focusing in low light conditions or as a modeling light to preview lighting effects before taking a photo.

Техникалык тейлөө

• Тазалоо: Жарк этүүчү аппаратты тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. өжөр кир үчүн, бир аз гamp кездеме, андан кийин кургак чүпүрөк колдонсо болот. Күчтүү жуучу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: When not in use for extended periods, remove the batteries to prevent leakage. Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
• Колдонуу: Avoid dropping the unit or subjecting it to strong impacts. The LCD screen and LED lights are delicate components.

Проблемаларды чечүү

• Жарк этпейт:
  • Батареялардын туура орнотулганын жана жетиштүү заряды бар экенин текшериңиз.
  • Check that the power control unit is securely mounted to the camera's hot shoe.
  • Жарк этип күйгүзүлгөнүн текшериңиз.
• ЖК дисплей иштебейт:
  • Check battery charge. Replace batteries if necessary.
  • Блоктун күйгүзүлгөнүн текшериңиз.
• Inconsistent light output:
  • Батареянын деңгээлин текшериңиз; батареянын аздыгы иштөөгө таасир этиши мүмкүн.
  • Ensure diffusers are properly attached and clean.
• Ring flash not attaching to lens:
  • Confirm you are using the correct adapter ring size for your lens.
  • Ensure the adapter ring is securely screwed onto the lens.

Техникалык шарттар

Image: A diagram illustrating the key dimensions of both the control unit and the ring flash head, including height, width, and diameter measurements.

Кепилдик жана колдоо

Andoer products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.