Fluid Audio FX50 5-inch Coaxial Studio Reference Monitor

Introduction

The Fluid Audio FX50 is a 5-inch single point source coaxial reference monitor, designed for professional audio production and critical listening environments. This bi-amplified monitor delivers 90 watts of power with a frequency response of 49Hz to 22kHz (+/-3db). Its unique coaxial driver design ensures a coherent soundstage and precise imaging, making it an ideal tool for mixing and mastering.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• 5-inch Coaxial Studio Monitor
• Frequency response: 49Hz – 22KHz (+/- 3db)
• Crossover frequency: 2.9KHz
• Class D and DSP powered ampжашоо
• Dual concentric "coaxial" driver for accurate sound reproduction

Продукт бүттүview

The FX50 monitor features a robust design with a front-loaded slot port for optimized bass output. The coaxial driver places the tweeter in the center of the woofer, creating a single point source for all frequencies, which enhances stereo imaging and depth of field.

Жайгашуу

Proper setup is crucial for optimal performance of your FX50 monitors. Ensure the monitors are placed on a stable surface, ideally at ear level, and equidistant from your listening position to create an equilateral triangle. The rear panel offers various input and control options.

Байланыштары:

• XLR киргизүү: For balanced audio connections from professional audio interfaces or mixers.
• TRS киргизүү: For balanced or unbalanced 1/4-inch connections.
• RCA киргизүү: For unbalanced audio connections from consumer-grade equipment.
• Кубат киргизүү: Connect the provided power cable to a suitable AC outlet.

Ensure the monitor's power switch is in the 'Off' position before making any connections. Once all audio cables are securely connected, you can switch the monitor 'On'.

Иштеп жатат

The FX50 monitors provide several controls on the rear panel to tailor their sound to your listening environment.

Башкаруу каражаттары:

• Үн баскычы: Adjusts the overall output level of the monitor. Start with a low setting and gradually increase to a comfortable listening level.
• EQ Dip Switches: These switches allow for acoustic adjustments to compensate for room acoustics or personal preference. Refer to the labels on the rear panel for specific settings.
• HF Shelf (Switches 1-2): Adjusts high-frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
• Mid EQ (Switches 3-4): Adjusts mid-range frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
• Acoustic Space (Switches 5-6): Compensates for bass buildup when monitors are placed near walls or corners. Options typically include 0dB, -1dB, -2dB, -4dB.
• Low Freq Cutoff (Switches 7-8): Applies a high-pass filter to cut off low frequencies, useful when using a subwoofer. Options typically include Flat, 60Hz, 80Hz, 100Hz.
• Кубат которгучу: Мониторду күйгүзөт же өчүрөт.

Техникалык тейлөө

To ensure the longevity and optimal performance of your Fluid Audio FX50 monitors, follow these maintenance guidelines:

• Тазалоо: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners, solvents, or waxes. Do not spray liquids directly onto the monitor.
• Жайгашкан жери: Keep monitors away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the units.
• Колдонуу: Handle with care. Avoid dropping or subjecting the monitors to strong impacts.
• Күч: Disconnect the power cable from the wall outlet if the monitors will not be used for an extended period.

Проблемаларды чечүү

If you encounter issues with your FX50 monitors, refer to the following common troubleshooting steps:

• Үн жок:
• Check all power connections and ensure the monitor is switched on.
• Verify that audio cables are securely connected to both the monitor and the audio source.
• Монитордогу жана аудио булагыңыздагы үн баскычы күйгүзүлгөнүн текшериңиз.
• Бузулган жабдууларды жокко чыгаруу үчүн башка аудио булагы же кабель менен сынап көрүңүз.
• Hissing Noise:
• A slight hiss can be normal at high volume settings with no input. Reduce the monitor's volume if the hiss is excessive.
• Ensure you are using balanced cables (XLR or TRS) for longer runs to minimize interference.
• Check for ground loops by ensuring all audio equipment is plugged into the same power strip or outlet.
• Бурмаланган үн:
• Lower the input level from your audio source or the monitor's volume.
• Бузулган кабельдерди текшериңиз.
• Ensure the EQ dip switches are not set to extreme values that might cause clipping.

Техникалык шарттар

Official Product Video (FX80 Series Overview)

Кепилдик жана колдоо

The Fluid Audio FX50 monitor comes with a Limited Warranty. For detailed information regarding warranty terms, coverage, and how to obtain service, please refer to the warranty card included with your product or visit the official Fluid Audio webсайт.

Кошумча жардам, техникалык колдоо же үчүн view additional product resources, please visit the Fluid Audio Store on Amazon or the official Fluid Audio webсайт.