Alpine S-S65 6.5-inch Coaxial Car Speakers and Metra 72-7400 Harness Installation Manual

1. Киришүү

This manual provides detailed instructions for the installation and operation of your Alpine S-S65 6.5-inch Coaxial 2-Way Car Audio Speakers, bundled with the Metra 72-7400 Speaker Harness Connector. This speaker and harness combination is specifically designed for compatibility with the 2013-2015 Nissan Altima Sedan, facilitating a direct replacement for factory speakers.

Please read this manual thoroughly before beginning installation to ensure proper setup and to prevent damage to your vehicle or the product.

2. Коопсуздук маалыматы

• Always disconnect the vehicle's negative battery terminal before performing any electrical work to prevent short circuits and electrical shock.
• Орнотуу учурунда тиешелүү коопсуздук шаймандарын, анын ичинде көздү коргоону кийиңиз.
• Ensure all wiring connections are secure and properly insulated to prevent shorts and ensure reliable performance.
• Do not obstruct vehicle airbags or other safety features during installation.
• Эгерде сиз орнотуу процессинин кайсы бир бөлүгү боюнча күмөн санасаңыз, квалификациялуу автоунаа аудио адисине кайрылыңыз.

3. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизде бар экенин текшериңиз:

• (2) Alpine S-S65 6.5-inch Coaxial 2-Way Car Audio Speakers
• (2) Metra 72-7400 Speaker Harness Connectors
• (2) Speaker Mounting Adapters (Rings)
• (1) Set of Mounting Screws and Clips
• (1) Set of Speaker Wires (for connection to harness if needed)

This image displays the two Alpine S-S65 6.5-inch coaxial speakers from the front, showing their cone and tweeter design.

This image shows the two circular speaker mounting adapters, two speaker wiring harnesses (Metra 72-7400 type), and various screws and clips for installation.

4. Орнотуу жана орнотуу

4.1. Керектүү куралдар

• Панелди алып салуу куралдары
• Бурагычтар (Phillips жана жалпак баш)
• Розетка ачкычынын топтому
• Зым кыргычтар/кримперлер
• Электр лентасы же жылуулукту кичирейтүүчү түтүк
• Multimeter (optional, for testing polarity)

4.2. Орнотууга чейинки кадамдар

1. Батареяны ажыратыңыз: Locate your vehicle's battery and disconnect the negative (-) terminal to prevent accidental electrical shorts.
2. Динамиктин жайгашкан жерине кирүү: Carefully remove the door panels or other trim pieces to access the factory speaker locations. Refer to your vehicle's service manual for specific instructions on trim removal.
3. Remove Factory Speakers: Unscrew and disconnect the wiring from the existing factory speakers. Remove the speakers from their mounting locations.

4.3. Speaker and Harness Connection

1. Identify Speaker Terminals: The Alpine S-S65 speakers have positive (+) and negative (-) terminals. The larger terminal is typically positive.
2. Connect Metra Harness: The Metra 72-7400 harness is designed to plug directly into your vehicle's factory speaker wiring. Connect the other end of the Metra harness to the Alpine S-S65 speaker terminals. Ensure correct polarity: positive to positive, negative to negative. If the harness wires are not pre-terminated for the speaker, you may need to strip the wires and use crimp connectors or solder them.

This image highlights the rear of the Alpine S-S65 speakers, clearly showing the positive and negative wiring terminals for connection.

4.4. Динамик орнотуу

1. Attach Mounting Adapter: Secure the provided speaker mounting adapter rings to the Alpine S-S65 speakers using the appropriate screws. These adapters ensure a proper fit in your Nissan Altima's speaker openings.
2. Спикердин кызмат орду: Place the assembled speaker and adapter into the vehicle's speaker opening.
3. Коопсуз динамик: Use the provided mounting screws to firmly attach the speaker assembly to the vehicle's door frame or mounting bracket. Do not overtighten.

4.5. Орнотуудан кийинки

1. Сыноо байланыштары: Before reassembling the door panels, reconnect the vehicle's negative battery terminal. Turn on your car's audio system and test the new speakers to ensure they are functioning correctly and producing clear sound. Check for proper balance and fade.
2. Тримди кайра чогултуу: Once you have confirmed proper operation, carefully reattach the door panels and any other trim pieces removed during installation. Ensure all clips and screws are securely fastened.
3. Акыркы текшерүү: Verify that all vehicle functions (windows, door locks, etc.) are working correctly after reassembly.

5. Динамиктерди иштетүү

Once installed, your Alpine S-S65 speakers will operate as part of your vehicle's audio system. Sound output is controlled by your car's head unit (stereo receiver).

• Аудио жөндөөлөрү: Adjust the bass, treble, balance, and fader settings on your head unit to optimize sound quality to your preference.
• Үндү көзөмөлдөө: Avoid operating the speakers at excessively high volumes for extended periods, as this can lead to distortion and potential damage.

6. Техникалык тейлөө

The Alpine S-S65 speakers require minimal maintenance to ensure long-lasting performance.

• Тазалоо: Periodically wipe the speaker grilles (if exposed) with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
• Текшерүү: Occasionally check for any loose connections or signs of wear, especially if you experience changes in sound quality.
• Экологиялык факторлор: Автоунаа үчүн иштелип чыкканы менен, динамиктерди ашыкча нымдуулукка же кадимки унаанын иштөө шарттарынан тышкары өтө жогорку температурага дуушар кылбаңыз.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

Alpine products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Alpine webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Alpine customer support through their official webсайт же ыйгарым укуктуу тейлөө борборлору.

Alpine Official Webсайт: www.alpine-usa.com