Clore Automotive JNC550A

Clore Automotive Jump-N-Carry JNC550A Jump Starter with Air Compressor User Manual

Model: JNC550A

Introduction

The Clore Automotive Jump-N-Carry JNC550A is a multi-function jump start system designed for reliable vehicle starting and tire inflation. It features exclusive Clore PROFORMER battery technology, engineered to deliver high peak amps, extended cranking power, and a long service life. This unit also includes an integrated air compressor for tire maintenance and USB output for charging small electronic devices.

Кутуда эмне бар

Contents of the JNC550A box including the jump starter, charging cable, and 12V cable.

Image: The JNC550A unit, a JNC350 Charging Cable, and an ESA1 12V Cable are included in the box.

  • (1) JNC550A Jump Starter: The main unit with integrated air compressor and power outputs.
  • (1) JNC350 Charging Cable: For recharging the internal battery of the jump starter.
  • (1) ESA1 12V Cable: For connecting to a 12V power source.

Жайгашуу

Баштапкы заряддоо

Before first use, fully charge the JNC550A unit. Connect the provided JNC350 Charging Cable to the unit's charging port and plug it into a standard wall outlet. The unit features an automatic charging system. Monitor the digital display for battery status. A full charge ensures optimal performance and extends battery life.

Master ON/OFF Switch

Close-up of the JNC550A control panel showing the digital display, master switch, and USB port.

Сүрөт: деталдуу view of the JNC550A control panel, highlighting the master ON/OFF switch, digital display, and various ports.

Locate the master ON/OFF switch on the unit's control panel. This switch disables the unit during storage and transport to prevent accidental discharge or operation. Ensure the unit is in the 'OFF' position when not in use or when being transported.

Иштөө нускамалары

Унааны секирип баштоо

JNC550A jump starter connected to a car battery in an open hood.

Image: The JNC550A jump starter positioned on a vehicle's engine bay, with its heavy-duty clamps connected to the car battery terminals.

  1. Ensure the JNC550A's master ON/OFF switch is in the 'OFF' position.
  2. Кызыл позитивдүү (+) клды туташтырыңызamp to the positive (+) terminal of the vehicle's discharged battery.
  3. Кара негативди туташтыруу (-) clamp to a solid, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines.
  4. Turn the JNC550A's master ON/OFF switch to the 'ON' position.
  5. Attempt to start the vehicle. If the vehicle does not start immediately, wait a few minutes before trying again.
  6. Once the vehicle starts, turn the JNC550A's master ON/OFF switch to the 'OFF' position.
  7. Кара терс (-) cl ажыратыңызamp алгач, андан кийин кызыл оң (+) clamp.
  8. Классты сактооamps securely in their designated holders on the unit.

Аба компрессорун колдонуу

JNC550A jump starter with air hose connected to a car tire valve.

Image: The JNC550A unit placed next to a car tire, with the air hose attached to the tire's valve stem for inflation.

  1. Ensure the JNC550A's master ON/OFF switch is in the 'ON' position.
  2. Uncoil the air hose from the unit.
  3. Securely attach the air hose chuck to the valve stem of the tire or inflatable item.
  4. Аба компрессорунун которгучун күйгүзүңүз.
  5. Monitor the integrated air gauge for the desired pressure.
  6. Once the desired pressure is reached, turn off the air compressor switch.
  7. Disconnect the air hose chuck from the valve stem and recoil the hose.

Charging Electronic Devices (USB Output)

The JNC550A features a 5V/2.4A USB output port for charging small electronic devices such as smartphones and tablets.

  1. Ensure the JNC550A's master ON/OFF switch is in the 'ON' position.
  2. Plug your device's USB charging cable into the USB output port on the JNC550A.
  3. Кабелдин экинчи учун электрондук аспабыңызга туташтырыңыз.
  4. The device should begin charging.

Using the LED Task Light

The unit includes an LED task light for illumination in low-light conditions, which can also function as a roadside warning light.

  1. Ensure the JNC550A's master ON/OFF switch is in the 'ON' position.
  2. Press the light button to turn on the LED task light.
  3. Press the button again to cycle through different light modes, including an emergency flashing capability.
  4. Press the button a final time to turn off the light.

Техникалык тейлөө

To ensure the longevity and optimal performance of your JNC550A, regular maintenance is recommended:

  • Толуктоо: Recharge the unit after each use, especially after jump starting or extended air compressor use. For prolonged storage, recharge the unit every 30-60 days to maintain the internal battery's health.
  • Тазалоо: Keep the unit clean and free of dirt, dust, and moisture. Use a dry cloth to wipe down the exterior.
  • Кабель жана Клamp Текшерүү: Periodically inspect the heavy-duty cables and clamps for any signs of damage, corrosion, or wear. Replace if necessary.
  • Сактагыч: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the master ON/OFF switch is in the 'OFF' position during storage.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Unit does not turn on/digital display is blank.Master ON/OFF switch is off; internal battery is discharged.Ensure master switch is ON. Recharge the unit fully.
Секирүүгө аракет кылгандан кийин унаа от албайт.Туура эмес clamp connection; severely discharged vehicle battery; unit battery low.Текшерүү clamp connections for secure contact. Ensure JNC550A is fully charged. Allow a few minutes between attempts.
Аба компрессору үйлүлбөйт.Air hose not securely attached; compressor switch off; unit battery low.Ensure air hose is tightly connected to valve stem. Turn on compressor switch. Recharge the unit.
USB түзмөгү кубатталбай жатат.Unit battery low; USB cable faulty; device not compatible.Recharge the JNC550A. Try a different USB cable. Verify device compatibility.

Техникалык шарттар

JNC550A jump starter with dimensions labeled: 12 inches high, 8 inches deep, 12.8 inches wide.

Image: The JNC550A unit with its approximate dimensions indicated.

  • Модел: JNC550A
  • Чоку Amps: 1100 Amps
  • Cranking Amps: 325 Amps
  • Батарея түрү: 18Ah Clore PROformer (Sealed, non-spillable lead acid)
  • Тtage: 12 вольт (ток)
  • Аба компрессору: 120 PSI with 24-inch braided air hose and air gauge
  • USB чыгышы: 5V/2.4A
  • Продукциянын өлчөмдөрү: 8"D x 12"W x 12.8"H
  • Элемент Салмагы: 22.9 фунт
  • Сырткы: Drop-resistant housing with rubberized base
  • Автоунаага ылайыктуу түрү: Universal Fit

Расмий продукт Video

Видео: Бүттүview of the Jump-N-Carry JNC550A 1100 Peak Amp Jump Starter with Air Compressor, demonstrating its key features and functions.

Кепилдик жана колдоо

For warranty information, technical support, or service inquiries regarding your Clore Automotive Jump-N-Carry JNC550A, please refer to the documentation included with your product or visit the official Clore Automotive website. Ensure you have your model number (JNC550A) and purchase details available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.