Zerone External S Meter SWR Power Meter User Manual

Introduction

This user manual provides comprehensive instructions for the Zerone External S Meter SWR Power Meter, designed specifically for use with Yae FT-857D and FT-897 transceivers. This high-performance meter offers excellent durability and stability, clearly displaying critical parameters such as automatic level control voltage, modulation level, standing wave ratio, and supply voltage.

• Only applicable for Yae FT-857D and FT-897.
• Clearly displays the automatic level control voltage, modulation level, standing ratio, and supply voltage.
• High performance and super stability.
• иштетүү үчүн жеңил.
• High quality and excellent durability.

Орнотуу жана калибрлөө

Figure 1: The Zerone External S Meter with its connecting cable.

2-сүрөт: деталдуу view of the meter's display face, showing SIG, PWR, SWR, MOD, VOLT, and DISC scales.

Эсептегичти иштетүү

Once properly set up and calibrated, the Zerone External S Meter provides real-time readings for various radio parameters. The meter's needle will indicate values on the selected scale (SIG, PWR, SWR, MOD, VOLT, DISC) based on your radio's operation mode (receive or transmit).

Refer to your Yaesu FT-857D or FT-897 transceiver's manual for specific interpretations of these readings in different operating scenarios.

Figure 3: The meter clearly displays automatic level control voltage, modulation level, standing wave ratio, and supply voltage.

Техникалык тейлөө

The Zerone External S Meter is designed for durability. Regular maintenance is minimal but important for continued accuracy and longevity.

• Keep the meter clean and free from dust. Use a soft, dry cloth to wipe the casing and display face.
• Эсептегичти узак убакыт бою өтө жогорку температурага же түз күн нуруна дуушар кылбаңыз.
• If the meter's pointer does not return to zero when the unit is off or disconnected, it may be due to transit bumps. In such cases, carefully adjust the self-zeroing screw located on the mask-side of the instrument. This screw is typically black.

Figure 4: Dimensions of the Zerone External S Meter: 6.7 cm * 7 cm * 6 cm.

Проблемаларды чечүү

This section addresses common issues you might encounter with your Zerone External S Meter.

Hidden Menu Access

If you are unable to find menu items No-060 or No-061 in your radio's setup menu, these menus might be hidden. To access them:

1. көпкө басыңыз F key on your radio to open the menu settings.
2. Set the relevant menu option to ON to reveal the hidden menus.
3. басыңыз F key again to exit and save the settings.

Static Pointer / Zeroing Issues

The instrument is calibrated at delivery. However, transit bumps can sometimes cause the pointer to not rest at zero. If this occurs:

• Locate the black self-zeroing screw on the mask-side of the instrument.
• Gently adjust this screw with a small flathead screwdriver until the pointer rests at the zero mark.

Техникалык шарттар

Кепилдик маалымат

Specific warranty details for the Zerone External S Meter are not provided in this manual. Please refer to the product packaging or contact Zerone customer support for information regarding warranty coverage and terms.

Кардарларды колдоо

For technical assistance, troubleshooting, or general inquiries about your Zerone External S Meter, please visit the official Zerone store or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's official webсайт.

Сиз да зыярат кылсаңыз болот Zerone Store on Amazon көбүрөөк продукт маалымат жана колдоо ресурстар үчүн.