MaedHawk X4 aptX HD Bluetooth Car AUX Adapter User Manual

Introduction

This manual provides instructions for the MaedHawk X4 aptX HD Bluetooth Car AUX Adapter. This device allows you to wirelessly stream audio from your Bluetooth-enabled smartphone or other devices to your car stereo, wired headphones, or home speakers via a 3.5mm AUX input. It features Bluetooth 5.0, aptX HD, and aptX Low Latency codecs for high-quality audio and reduced delay.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 1 * X4 Bluetooth receiver
• 1 * 3.5mm Female-Female Audio cable
• 1 * USB-C Charging cable
• 1 * Колдонуучунун колдонмосу

Продукт бүттүview

The MaedHawk X4 Bluetooth adapter is designed for ease of use and versatility. It features a compact design with a rotatable 3.5mm AUX jack, allowing it to fit into various spaces. The device includes control buttons for volume, track navigation, and a multi-function button (MFB) for power and pairing.

Орнотуу жана жупташтыруу

1. Аппаратты заряддоо: Before first use, fully charge the MaedHawk X4 using the provided USB-C charging cable. The device can also be charged while in use.
2. Күйгүзүп, жупташтыруу режимине өтүңүз: Press and hold the Multi-Function Button (MFB) for approximately 3 seconds until the LED indicator flashes, indicating it is in pairing mode.
3. Аудио булагына туташуу: Plug the 3.5mm rotatable jack of the MaedHawk X4 into the AUX input of your car stereo, wired headphones, or home speaker system.
4. Смартфонуңуз менен жупташуу:
   • Смартфонуңузда Bluetooth жөндөөлөрүнө өтүңүз.
   • Bluetooth иштетилгенин текшериңиз.
   • Издөө available devices and select "Maedhawk X4" to connect.
   • Once connected, the LED indicator on the adapter will show a steady light.
5. Агымды баштоо: Open your preferred music application on your smartphone and begin playing audio.

Иштөө нускамалары

• Күйгүзүү/өчүрүү: Press and hold the MFB for 3 seconds to power on or off.
• Ойнотуу/тындыруу: Short press the MFB to play or pause music.
• Үнүн жогорулатуу/төмөндөтүү: Short press the "+" button for volume up, short press the "-" button for volume down.
• Кийинки трек/Мурунку трек: Long press the "+" button for the next track, long press the "-" button for the previous track.
• Чалууга жооп берүү/аяктоо: Short press the MFB to answer an incoming call or end an ongoing call.
• Чакырууну четке кагуу: Long press the MFB to reject an incoming call.
• Үн Жардамчысын жандыруу: Double-press the MFB to activate your smartphone's voice assistant (e.g., Siri, Google Assistant).
• Кош түзмөк туташуу: The MaedHawk X4 supports connecting to two Bluetooth devices simultaneously. After pairing the first device, put the adapter back into pairing mode and connect the second device.

Advanced Audio Codec Selection (for Android)

To ensure you are utilizing the highest quality audio codecs like aptX HD or aptX Low Latency, you may need to adjust settings on your Android smartphone. The adapter automatically selects the highest available codec, but manual verification is possible.

1. Иштеп чыгуучунун параметрлерин иштетүү: Go to "Settings" > "About phone" (or "System" > "About phone"). Tap "Build number" seven times to enable Developer Options.
2. Access Bluetooth Audio Codec Settings: Go to "Settings" > "System" > "Developer options". Find "Bluetooth Audio Codec".
3. Select Codec: Choose your desired codec (e.g., aptX HD, aptX Low Latency). Note that the codec will automatically match the highest supported by both your phone and the adapter.

Проблемаларды чечүү

• Кубат жок/Түзмөк күйбөй жатат: Ensure the device is fully charged. Connect it to the USB-C charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Смартфон менен жупташтырууга мүмкүн эмес:
  • Ensure the adapter is in pairing mode (flashing LED).
  • Turn off and on your smartphone's Bluetooth.
  • Forget the device from your smartphone's Bluetooth list and try pairing again.
  • Ensure the adapter is not already connected to another device.
• Аудио жок же үнү төмөн:
  • Check that the adapter is securely plugged into the AUX input.
  • Increase the volume on both the MaedHawk X4 adapter and your smartphone.
  • Ensure your car stereo or speaker system is set to the correct AUX input source.
  • Verify that the correct audio codec is selected on your smartphone (see Advanced Audio Codec Selection).
• Sound Distortion/Poor Quality:
  • Ensure the 3.5mm connection is secure and clean.
  • Move your smartphone closer to the adapter to avoid interference.
  • Check if your smartphone supports aptX HD or aptX Low Latency for optimal sound quality.
• Call Quality Issues (Microphone):
  • Ensure the adapter's microphone is not obstructed.
  • Speak clearly and directly towards the adapter.
  • Environmental noise can affect call clarity; CVC8.0 Noise Reduction helps but extreme noise may still impact performance.

Техникалык шарттар

Коопсуздук маалыматы

• Do not expose the device to extreme temperatures (hot or cold) or direct sunlight.
• Суу же башка суюктуктар менен байланышуудан алыс болуңуз.
• Түзмөктү бөлүктөргө бөлүүгө, оңдоого же өзгөртүүгө аракет кылбаңыз. Бул кепилдикти жокко чыгарат.
• Балдар жетпеген жерде сактаңыз.
• Аппаратты жана анын батареясын жергиликтүү эрежелерге ылайык таштаңыз.
• Avoid using the device in environments where it may interfere with other electronic equipment.

Кепилдик жана колдоо

The MaedHawk X4 Bluetooth Car AUX Adapter comes with a warranty. Please refer to the included Warranty Card for specific terms and conditions. For technical support or customer service, please contact MaedHawk customer support through the retailer where the product was purchased or visit the official MaedHawk webсайт.

MaedHawk Store: Visit the MaedHawk Store