AGPTEK PC000226

AGPTEK KVM HDMI USB Extender Instruction Manual

Модел: PC000226

1. Киришүү

The AGPTEK KVM HDMI USB Extender (Model PC000226) allows for the extension of HDMI video and USB keyboard/mouse signals over a single Ethernet cable (CAT5/5e/6/7) up to 120 meters (365 feet). This device is designed for managing servers from a remote workstation, supporting resolutions up to 1080p at 60Hz. It ensures signal stability and reliability over long distances and can be configured for point-to-point or one-to-many receiver setups.

2. Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

  • 1x KVM HDMI USB Extender Sender Unit (TX)
  • 1x KVM HDMI USB Extender Receiver Unit (RX)
  • 2x DC 5V Power Adapters
  • 1x USB-Aдан USB-Aга кабелдик
  • 1x Колдонуучунун колдонмосу (бул документ)

3. Продукциянын өзгөчөлүктөрү

  • KVM функциясы: Enables control of a computer system using a single keyboard and mouse from a remote location.
  • Extended Transmission: Transmits HDMI and USB signals up to 120 meters (365 feet) over a single CAT5/5e/6/7 Ethernet cable.
  • Жогорку сапаттагы видео: Supports video resolutions up to 1080p @ 60Hz.
  • USB 1.1 шайкештиги: Works with wired USB 1.1 mice and keyboards, or Bluetooth devices with a USB dongle. Also supports DVR camera mouse and keyboard functions. Note: Does not support 2.4G wireless mouse/keyboard kits.
  • One-to-Many Configuration: A single sender unit can connect to multiple receiver units via an Ethernet switch for multi-display setups.
  • EDID Copy Function: Automatically matches display device types for optimal compatibility.
  • Ethernet стандарты: Complies with 802.3 Ethernet 10/100/1000 Mbps standards.
  • Built-in ESD Protection: Enhances transmission safety and device longevity.
AGPTEK KVM Extender features: TCP/IP, pluggable mouse/keyboard, 120m extension, concise design, HD 1080P support.

Figure 3.1: Key features of the AGPTEK KVM HDMI USB Extender, highlighting TCP/IP agreement, USB peripheral support, 120-meter extension capability, compact design, and 1080P HD video support.

4. Продукт бүтүп калдыview and Interfaces

Familiarize yourself with the sender (TX) and receiver (RX) units and their respective ports.

Diagram of AGPTEK KVM Extender Sender (TX) and Receiver (RX) units showing HDMI In/Out, USB In/Out, DC 5V power, LAN TX/RX, and Reset button.

Figure 4.1: Interface diagram for the Sender (TX) and Receiver (RX) units. The TX unit features DC 5V power input, HDMI input, and USB input. The RX unit includes DC 5V power input, HDMI output, and USB ports for mouse/keyboard. Both units have LAN TX/RX ports and a reset button.

Sender Unit (TX)

  • DC 5V: Кубат киргизүү порту.
  • HDMI IN: Connects to the HDMI output of your source device (e.g., computer, DVR).
  • USB IN (PC): Connects to the USB port of your source device using the provided USB-A to USB-A cable. This transmits keyboard and mouse data.
  • LAN TX: Connects to the Ethernet cable (CAT5/5e/6/7) for signal transmission to the receiver.
  • КАЛТЫРУУ: Button to reset the unit.
  • Сигнал жарыгы: Indicates signal status.

Кабыл алуучу бирдиги (RX)

  • DC 5V: Кубат киргизүү порту.
  • HDMI OUT: Connects to the HDMI input of your display device (e.g., monitor, TV).
  • USB (Mouse/Keyboard): Connects to your USB mouse and keyboard.
  • LAN RX: Connects to the Ethernet cable (CAT5/5e/6/7) receiving signal from the sender.
  • КАЛТЫРУУ: Button to reset the unit.
  • Сигнал жарыгы: Indicates signal status.

5. Орнотуу нускамалары

Follow these steps to set up your KVM HDMI USB Extender.

5.1. Point-to-Point Connection

  1. Connect Source to Sender (TX):
    • Баштапкы түзмөгүңүздүн HDMI чыгышынан HDMI кабелин туташтырыңыз HDMI-IN port on the Sender (TX) unit.
    • Connect the provided USB-A to USB-A cable from your source device's USB port to the USB IN (PC) port on the Sender (TX) unit.
  2. Connect Display and Peripherals to Receiver (RX):
    • HDMI кабелин түзмөктөн туташтырыңыз HDMI OUT port on the Receiver (RX) unit to your display device's HDMI input.
    • USB клавиатураңызды жана чычканыңызды туташтырыңыз USB ports on the Receiver (RX) unit.
  3. Connect Sender (TX) and Receiver (RX) with Ethernet Cable:
    • Connect a single CAT5/5e/6/7 Ethernet cable from the LAN TX port on the Sender (TX) unit to the LAN RX port on the Receiver (RX) unit. Ensure the cable length does not exceed 120 meters.
  4. Күйгүзүү:
    • Connect the two DC 5V power adapters to the DC 5V ports on both the Sender (TX) and Receiver (RX) units, then plug them into power outlets.
  5. Verify the signal lights on both units are active, indicating a successful connection.
Diagram showing a computer connected to the KVM Extender Sender, which is connected via Ethernet to the Receiver, then to a monitor, keyboard, and mouse, illustrating 120m extension.

Figure 5.1: Basic point-to-point connection setup, demonstrating signal extension up to 120 meters from a computer to a remote display and KVM peripherals.

5.2. One-to-Many Receiver Connection (via Ethernet Switch)

For connecting one source to multiple displays and KVM workstations, an Ethernet switch is required.

  1. Connect Source to Sender (TX): Follow steps 5.1.1 for connecting your source device to the Sender (TX) unit.
  2. Connect Sender (TX) to Ethernet Switch: туташтыруу LAN TX port of the Sender (TX) unit to an available port on your Ethernet router or switch using an Ethernet cable.
  3. Connect Receiver(s) (RX) to Ethernet Switch: For each display and KVM workstation, connect the LAN RX port of a Receiver (RX) unit to an available port on the same Ethernet router or switch using an Ethernet cable.
  4. Connect Display and Peripherals to each Receiver (RX): For each Receiver (RX) unit, follow steps 5.1.2 to connect your display device, USB keyboard, and mouse.
  5. Күйгүзүү: Connect the DC 5V power adapters to all Sender (TX) and Receiver (RX) units, then plug them into power outlets.
  6. Verify all signal lights are active.
Diagram showing a computer connected to a KVM Extender Sender (TX), which is connected to a router/switch. Multiple KVM Extender Receiver (RX) units are connected to the same router/switch, each leading to a monitor, illustrating a one-to-many setup.

Figure 5.2: One-to-many connection setup, where a single source (computer) is extended to multiple monitors via a router or Ethernet switch and multiple receiver units.

Маанилүү кабелдик маалымат: Use high-quality CAT5/5e/6/7 STP or UTP Ethernet cables for optimal performance. For best video quality, especially over longer distances, CAT6 or higher cables are recommended. Obsolete CAT5 and CAT5e cables may impact video quality.

6. Иштөө нускамалары

Once the setup is complete and all units are powered on, the KVM extender will automatically establish the connection. The remote display should show the video output from the source device, and the connected USB keyboard and mouse will control the source device.

Image showing a USB mouse and keyboard connected to the KVM Extender Receiver, indicating they can be manipulated remotely.

Figure 6.1: Illustration of USB mouse and keyboard connectivity to the receiver unit, enabling remote control of the source device.

The system operates transparently, meaning your remote keyboard and mouse function as if they were directly connected to the source computer. No additional software or drivers are typically required for basic KVM functionality.

7. Техникалык тейлөө

To ensure the longevity and optimal performance of your AGPTEK KVM Extender, follow these maintenance guidelines:

  • Тазалоо: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or aerosol sprays.
  • Вентиляция: Ensure the units are placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
  • Кабелдик башкаруу: Keep cables neatly organized and avoid sharp bends or excessive tension, which can damage the cables or ports.
  • Электр камсыздоо: Use only the provided DC 5V power adapters. Using unauthorized power adapters may damage the device and void the warranty.
  • Курчап турган чөйрө: Агрегаттарды экстремалдык температурага, нымдуулукка же тике күн нуруна кабылуудан сактаңыз.

8. Кыйынчылыктарды

If you encounter issues with your KVM Extender, refer to the following common problems and solutions:

КөйгөйМүмкүн себепЧечим
No video on the remote display.
  • Loose HDMI or Ethernet cable connections.
  • Туура эмес электр энергиясы.
  • Incompatible resolution or refresh rate.
  • Бузулган кабельдер.
  • Check and re-secure all HDMI and Ethernet cables.
  • Ensure both TX and RX units are powered on with the correct 5V adapters.
  • Башка HDMI кабелин колдонуп көрүңүз.
  • Ensure your source device's resolution is set to 1080p@60Hz or lower.
Keyboard/mouse not responding.
  • Бош USB кабелдик байланыш.
  • Incompatible USB device (e.g., 2.4G wireless kit).
  • USB 1.1 compatibility issue.
  • Check and re-secure the USB-A to USB-A cable between the source and TX unit, and the keyboard/mouse to the RX unit.
  • Ensure your keyboard/mouse is a wired USB 1.1 device or a Bluetooth device with a USB dongle. 2.4G wireless kits are not supported.
  • Try a different keyboard/mouse.
Видеонун сапаты начар же бүлбүлдөп.
  • Low-quality or damaged Ethernet cable.
  • Excessive cable length.
  • Network congestion (in one-to-many setup).
  • Ethernet switch speed limitation.
  • Use high-quality CAT6 or CAT7 Ethernet cables.
  • Ensure cable length is within the 120-meter limit.
  • If using an Ethernet switch, ensure it is a Gigabit (1000 Mbps) switch. Fast Ethernet (100 Mbps) switches may cause performance issues, especially with video.
  • Consider creating a VLAN for the KVM traffic if network collapse occurs in complex network environments.
Network instability or collapse (in one-to-many setup).
  • High network traffic from KVM extenders without proper isolation.
  • If possible, configure a Virtual Local Area Network (VLAN) specifically for the KVM extender traffic to isolate it from other network activities.

9. Техникалык шарттар

Модель номериPC000226
БрендAGPTEK
Connectivity ProtocolEthernet (802.3 10/100/1000 Mbps)
Туташтыргыч түрүRJ45, HDMI, USB
Максималдуу узартуу аралыгы120 meters (365 feet) via CAT5/5e/6/7 cable
Колдоого алынган резолюция1080p @ 60Hz чейин
USB шайкештигиUSB 1.1 (wired mouse/keyboard, Bluetooth with dongle, DVR camera mouse/keyboard)
Электр камсыздооDC 5V (included adapters)
МатериалАлюминий
ТүсКара
Өлчөмдөрү (бирдик үчүн)Information not explicitly provided for individual units
Weight (package)830 грамм

10. Коопсуздук маалыматы

Түзмөккө зыян келтирбөө же өзүңүзгө жаракат келтирбөө үчүн төмөнкү коопсуздук чараларын окуп чыгып, аткарыңыз:

  • Түзмөктү бөлүктөргө бөлбөңүз же өзгөртпөңүз. Бул электр тогуна урунууга же өрткө алып келиши мүмкүн.
  • Аппаратты суудан, нымдан жана экстремалдык температурадан алыс кармаңыз.
  • Берилген кубат адаптерлерин гана колдонуңуз.
  • Аппаратты түшүрүүдөн же катуу таасирлерден сактаныңыз.
  • Бардык туташтырылган жабдуулардын туура жерге туташтырылышын камсыз кылыңыз.

11. Кепилдик жана колдоо

AGPTEK products are designed for reliability and performance. For warranty information and technical support, please refer to the official AGPTEK webсайтына кириңиз же сатуучуңузга кайрылыңыз. Кепилдик талаптары үчүн сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.

Кошумча жардам алуу үчүн төмөнкү дарекке кайрылыңыз: www.agptek.com

© 2026 AGPTEK. Бардык укуктар корголгон.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.