Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Mount-It! Single Monitor Arm Wall Mount Workstation. Please read this manual thoroughly before installation and retain it for future reference.
Коопсуздук маалыматы
Маанилүү: Improper installation or use of this product can result in serious injury or damage. Always follow these safety guidelines:
- Чогултуу жана орнотуудан мурун бардык көрсөтмөлөрдү кунт коюп окуп чыгыңыз.
- Ensure the mounting surface (wall) can safely support the combined weight of the workstation, monitor, and CPU. This product is designed for installation on wood studs or solid concrete walls only.
- Do not exceed the maximum weight capacities for the monitor arm (17.6 lbs) and CPU holder (22 lbs).
- This workstation is designed for standard flat computer displays (17-32 inches). It is not intended for oversized or ultrawide monitors.
- Өндүрүүчү тарабынан берилген же көрсөтүлгөн жабдууларды гана колдонуңуз.
- Эгерде сиз орнотуу боюнча кандайдыр бир күмөн санасаңыз, квалификациялуу адиске кайрылыңыз.
- Орнотуу учурунда балдарды жана үй жаныбарларын алыс кармаңыз.
Пакеттин мазмуну
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact Mount-It! customer support.
Сүрөт: Бүттүview of all workstation components, including the main pole, monitor arm, keyboard tray, and CPU holder.
- Монтаждык уюл
- Monitor Arm (Gas Spring)
- Foldable Keyboard Tray
- Adjustable CPU Holder
- Негизги колдоо кронштейн
- Жогорку колдоо кашаа
- Кабелдик башкаруу клиптери
- VESA плитасы
- Installation Hardware (screws, washers, drywall anchors)
- Allen Wrenches for adjustment
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | MI-7991 |
| Monitor Screen Size Compatibility | 17" - 32" |
| VESA шайкештиги | 75x75мм, 100x100мм |
| Салмак сыйымдуулугун көзөмөлдөө | 2.2 - 17.6 фунт (1 - 8 кг) |
| Клавиатура лотокторунун өлчөмдөрү | 26" x 9.5" |
| CPU Holder Width Adjustment | 4.8" - 8.3" |
| CPU Holder Weight Capacity | 22 фунтка чейин |
| Бийиктигин тууралоо диапазону | 28 inches (Gas Spring) |
| Тилтүү диапазону | ±35° |
| Айналма тоо | 180° |
| Айлануу | 180° (Портреттен пейзажга) |
| Материал | Эритме болот |
| Монтаж түрү | Wall Mount (Wood Studs or Concrete) |
Сүрөт: Detailed dimensions for the mounting pole, monitor arm, keyboard tray, and CPU holder.
Сүрөт: Illustration showing compatible monitor sizes (up to 32 inches), VESA patterns (75x75, 100x100), and maximum monitor weight capacity (17.6 lbs).
Орнотуу жана орнотуу
Follow these steps for proper installation of your workstation. It is recommended to have a second person assist during certain stagорнотуу.
1. Wall Mounting the Pole
- Жайгашкан жерди тандоо: Select a suitable wall location. The workstation must be mounted to wood studs or solid concrete.
- Install Base Bracket: Use a level to position the base support bracket. Mark the drill points. Drill pilot holes and insert drywall anchors if applicable (for concrete, use appropriate anchors). Secure the base bracket with screws and washers.
- Attach Mounting Pole: Attach the main mounting pole to the secured base support bracket.
- Жогорку кашаа орнотуу: Insert the top support bracket onto the pole. Use a level to ensure it is straight. Mark and drill pilot holes, then secure with screws and washers.
Видео: Detailed installation guide for the Mount-It! Wall Mounted Workstation, demonstrating each step from mounting the pole to attaching components and adjusting.
2. Компоненттерди тиркөө
- Колдорду бекитүү: Slide the cable management clips, keyboard arm, and monitor arm onto the main pole in the desired order.
- Клавиатура лотокту бекитүү: Secure the foldable keyboard tray to the keyboard arm using the provided screws.
- Prepare Monitor: VESA пластинкасын мониторуңуздун артына тиешелүү бурамалар аркылуу бекитиңиз.
- Мониторду орнотуу: Carefully attach the monitor (with VESA plate) to the monitor arm. Hand-tighten to ensure it is secure.
Сүрөт: The complete workstation assembly, showing the monitor arm, keyboard tray, and CPU holder mounted on a wall pole.
3. Installing CPU Holder
- Position CPU Holder: Place the CPU holder on the wall at your desired height and mark the pilot holes.
- Secure CPU Holder: Drill pilot holes, insert drywall anchors (if applicable), and secure the CPU holder to the wall using screws and washers.
- Mount CPU: Place your CPU into the holder and secure it with the provided safety straps.
Сүрөт: Close-up of the CPU wall mount, illustrating its adjustable width and safety straps for securing the computer.
4. Кабелдик башкаруу
Route all monitor, keyboard, mouse, and CPU cables through the integrated cable management clips on the arms and pole to maintain a tidy workspace.
Сүрөт: The workstation in use, highlighting the cable management system that keeps wires organized along the arm and pole.
Иштөө нускамалары
The Mount-It! workstation offers full motion and height adjustment for optimal ergonomic positioning.
Height Adjustment (Gas Spring)
The gas spring arm allows for smooth vertical movement. To adjust the height, gently push or pull the monitor arm to the desired position. The arm will hold its position once released.
Adjusting Gas Spring Tension: If the monitor arm is too stiff or too loose (monitor drops), adjust the gas spring tension using the provided Allen wrench. Turn counter-clockwise for heavier monitors (to increase tension) and clockwise for lighter monitors (to decrease tension.
Сүрөт: Visual guide on how to adjust the gas spring tension for the monitor arm to support different monitor weights.
Monitor Positioning (Tilt, Swivel, Rotation)
- Россия: The monitor can be tilted ±35° to reduce glare and optimize viewбурчтар.
- Айлануучу: Swivel the monitor 180° horizontally to share your screen or adjust your viewпозиция.
- Айлануу: Rotate the monitor 180° to switch between landscape and portrait orientation as needed.
Сүрөт: Demonstrates the extensive range of motion for the monitor and keyboard tray, including tilt, swivel, and full 28-inch height adjustment.
Клавиатура лотогунун колдонулушу
The keyboard tray can be folded upward when not in use to save space. Simply lift the tray until it locks into its vertical position. To lower, release the locking mechanism and gently pull down.
Видео: Бүттүview of the Mount-It! Height Adjustable Wall Mount Workstation, showcasing its features like gas spring adjustment, full motion design, and height/angle adjustments for the keyboard tray.
Техникалык тейлөө
- Тазалоо: Беттерди жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтардан алыс болуңуз.
- Мезгилдүү текшерүүлөр: Бардык бурамалар менен байланыштарды дайыма текшерип туруңуз, алар бекем жана коопсуз бойдон калууда.
- Газ булагы жөндөө: Re-adjust the gas spring tension if you notice the monitor arm sagging or becoming too difficult to move.
Проблемаларды чечүү
| Көйгөй | Чечим |
|---|---|
| Монитордун колу салбырап турат же ордун кармабайт. | The gas spring tension needs adjustment. Use the provided Allen wrench to turn counter-clockwise to increase tension for heavier monitors. |
| Монитордун колу кыймылдоо үчүн өтө катуу. | The gas spring tension is too high. Use the provided Allen wrench to turn clockwise to decrease tension for lighter monitors. |
| Workstation feels unstable on the wall. | Ensure the mounting pole and brackets are securely fastened to wood studs or solid concrete. Re-check all screws and anchors. Do not exceed weight limits. |
| Кабелдер чаташкан же илинип калган. | Utilize the integrated cable management clips along the arms and pole to route and secure all cables. |
Кепилдик жана колдоо
For warranty information, product support, or to purchase replacement parts, please contact Mount-It! customer service or visit their official webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
Бренд: Маунт-Ит!
Webсайт: Visit the Mount-It! Store on Amazon