BIG RED T820014S Torin Hydraulic Trolley Service/Floor Jack User Manual

1. Коопсуздук боюнча маанилүү маалымат

Always read and understand all instructions and warnings before using this product. Failure to follow these instructions may result in property damage, serious injury, or death.

• Сыйымдуулугу: Do not exceed the rated capacity of 1.5 tons (3,000 lbs). This jack is ideal for most cars but not recommended for SUVs and trucks due to lifting height limitations.
• Туруктуу бети: Always use the jack on a hard, level surface capable of supporting the load. Avoid uneven or soft ground.
• Джек стенддерин колдонуңуз: After lifting the vehicle to the desired height, always support the vehicle with appropriately rated jack stands before performing any work underneath. The jack is designed for lifting only, not for sustained support.
• Safety Bypass System: This jack is equipped with a safety bypass system to prevent overloading. Do not attempt to bypass or modify this system.
• Күнүмдүк текшерүү: Before each use, perform a daily inspection to ensure all components are in proper working order. Check for any signs of damage, leaks, or loose parts.
• Аймакты тазалоо: Ensure the area around the vehicle is clear of obstructions and personnel before lifting or lowering.
• Туура жайгаштыруу: Position the jack only on the vehicle manufacturer's recommended lifting points. Refer to your vehicle's owner's manual for specific jack points.

2. Кутуда эмне бар

Upon opening your BIG RED T820014S package, you should find the following components:

• Floor Jack (Main Unit)
• Handle (Two-piece assembly)
• Plastic Blow Mold Carrying Case
• Колдонуучунун колдонмосу (бул документ)

Image: The BIG RED T820014S Hydraulic Trolley Service/Floor Jack neatly stored within its durable plastic blow mold carrying case.

3. Орнотуу жана баштапкы даярдоо

1. Туткасы Ассамблеясы: Insert the two-piece handle into the handle socket on the jack. Ensure it is securely seated.
2. Bleeding the Hydraulic System: Before first use, it is crucial to bleed any air from the hydraulic system to ensure proper operation and full lifting capacity. To do this:
   • Толугу менен ачуу үчүн, ачуучу клапанды саат жебесине каршы буруңуз.
   • Туткасын 10-15 толук сокку менен айдаңыз.
   • Аны жабуу үчүн чыгаруу клапанын сааттын жебеси боюнча буруңуз.
   • The jack should now be ready for use. If it does not lift properly, repeat the bleeding process.

Image: The BIG RED T820014S jack with its two-piece handle detached, ready for assembly or storage.

Сүрөт: жакын план view of the oil plug and release valve, essential for bleeding the hydraulic system and controlling the jack's descent.

4. Иштөө нускамалары

4.1 Унааны көтөрүү

1. Унааны даярдоо: Унааны катуу, тегиз жерге токтотуңуз. Кол тормозду басып, жерде кала турган дөңгөлөктөргө домпульстарды коюңуз.
2. Джекти жайгаштырыңыз: Locate the vehicle manufacturer's recommended lifting point. Slide the jack under the vehicle, ensuring the saddle is centered on the lifting point.
3. Унааны көтөрүңүз: Turn the release valve clockwise to close it. Pump the handle up and down to raise the vehicle. Continue pumping until the vehicle is lifted to the desired height.
4. Install Jack Stands: Immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands by gradually turning the release valve counter-clockwise. Once the vehicle is securely resting on the jack stands, remove the floor jack.

Сүрөт: деталдуу view of the jack's saddle, designed to securely cradle the vehicle's lifting point during operation.

Image: The BIG RED T820014S jack positioned under a vehicle, demonstrating its lifting mechanism in action.

4.2 Унааны түшүрүү

1. Төмөндөө үчүн даярданыңыз: Ensure the area around the vehicle is clear. If jack stands were used, slightly raise the vehicle with the floor jack to remove the jack stands.
2. Унааны түшүрүңүз: Slowly turn the release valve counter-clockwise to gradually lower the vehicle. Do not open the valve too quickly, as this can cause the vehicle to drop rapidly.
3. Джекти алып салуу: Once the vehicle is fully lowered and resting on its wheels, remove the floor jack.

4.3 Окуу видеолору

5. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your hydraulic floor jack.

• Гидравликалык суюктукту текшерүү: Periodically check the hydraulic fluid level. If the jack is not lifting to its full height or feels spongy, the fluid level may be low or air may be present in the system. Refer to the bleeding instructions in Section 3.2.
• Агышууларды текшерүү: Regularly inspect the jack for any signs of hydraulic fluid leaks. Leaks can indicate damaged seals or fittings and should be addressed immediately by a qualified technician.
• Тазалоо жана майлоо: Keep the jack clean and free of dirt, grease, and debris. Lubricate moving parts and pivot points with light machine oil as needed.
• Сактагыч: Store the jack in its carrying case in a dry, clean area. When storing for extended periods, ensure the ram is fully retracted to prevent corrosion.

6. Кыйынчылыктарды

If you encounter issues with your BIG RED T820014S jack, refer to the following common troubleshooting steps:

• Jack Does Not Lift or Lifts Slowly:
  • Ажыратуучу клапандын толугу менен жабылганын текшериңиз.
  • Bleed the hydraulic system as described in Section 3.2 to remove any trapped air.
  • Check the hydraulic fluid level and refill if necessary.
• Jack Lowers Under Load:
  • Verify the release valve is fully closed and not leaking.
  • Inspect for external hydraulic fluid leaks. If leaks are present, discontinue use and seek professional repair.
  • Do not use the jack if it cannot hold a load.
• Difficulty with Oil Plug: Some users have reported the rubber oil plug being difficult to remove or reinsert. Use caution and appropriate tools (e.g., a flat screwdriver with care) to avoid damaging the plug.

7. Техникалык шарттар

Image: A visual representation of the jack's minimum (5-5/16 inches) and maximum (13 inches) lifting heights.

8. Кепилдик жана колдоо

For detailed warranty information, please refer to the documentation included with your product at the time of purchase. For additional support or to download a PDF version of this user manual, please visit the official BIG RED website or refer to the provided user manual link:

Колдонуучунун колдонмосун жүктөп алуу (PDF)