NEWTRY YX504
NEWTRY 10 Ton Hydraulic Jack Cylinder YX504 Instruction Manual
Модели: YX504
1. Киришүү
This manual provides essential information for the safe and effective use of the NEWTRY 10 Ton Hydraulic Jack Cylinder, Model YX504. Please read and understand all instructions before operating the equipment. Proper use and maintenance will ensure optimal performance and extend the lifespan of your hydraulic jack.
Image 1.1: NEWTRY 10 Ton Hydraulic Jack Cylinder (Model YX504). This image shows the main product with its yellow body and chrome piston rod, along with a product tag.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Бул коопсуздук нускамаларын аткарбоо олуттуу жаракатка же материалдык зыянга алып келиши мүмкүн.
- Always operate the hydraulic jack on a flat, stable, and hard surface. Avoid soft or uneven ground.
- Ensure the load is centered on the jack's saddle. Avoid one-sided force on the piston, as this can cause damage or instability.
- Never exceed the rated load capacity of 10 tons.
- Do not use this hydraulic jack for lifting vehicles. It is designed for industrial lifting applications, not automotive use.
- Wear appropriate personal protective equipment (PPE), such as safety gloves and eye protection.
- Keep hands and other body parts clear of moving parts and pinch points during operation.
- Inspect the jack for any damage or leaks before each use. Do not use if damaged.
- Ensure the hydraulic pump (sold separately) is compatible and properly connected.
- Do not modify the hydraulic jack in any way.
Image 2.1: Proper and improper usage of the hydraulic jack. This diagram illustrates the importance of using the jack on a flat surface and avoiding one-sided force on the piston. It also shows the jack can be used vertically, horizontally, or inverted.
Image 2.2: Important safety notice indicating the hydraulic jack is not designed for automotive applications.
3. Продукциянын өзгөчөлүктөрү
- High Tonnage Capacity: Rated for a maximum load of 10 tons.
- Extended Stroke: Features a 6-inch (150mm) stroke, allowing for significant lifting height.
- Автоматтык баш тартуу: The piston retracts automatically once hydraulic pressure is released, enhancing convenience.
- Туруктуу курулуш: Made from heavy-duty metal with a smooth lacquered surface for rust resistance and long-lasting use.
- Multi-Angle Operation: Can be used in vertical, horizontal, or inverted positions, offering versatility for various applications.
- Чаңдан коргоо: Equipped with a 3/8-inch male connector and a protective dust cover to keep the connection clean.
Image 3.1: Visual representation of the 6-inch (150mm) stroke length, highlighting the extended lifting capability.
Image 3.2: Cross-section diagram showing the internal components, including the high-temperature hardened spring layer, electroplated hard chrome piston rod, ground steel tube layer, and sunlight/rust prevention coating.
Сүрөт 3.3: Жакын пландан view of the 3/8-inch male connector and its protective dust cover, designed to maintain cleanliness and prevent contamination.
4. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Тоннаж | 10T |
| Инсульт | 6 дюйм (150мм) |
| Self Height (Closed) | 8.5 дюйм (210мм) |
| Сырткы диаметри | 2.5 дюйм (64мм) |
| Ички диаметри | 1.5 дюйм (38мм) |
| Салмагы | 10.12 фунт (4.6 кг) |
| Recommended Pump | CP-700 hand pump (sold separately) |
| Модель номери | YX504 |
Image 4.1: Detailed product parameters including tonnage, stroke, self-height, diameters, and weight.
5. Орнотуу
- Пакеттен чыгаруу: Carefully remove the hydraulic jack from its packaging. Inspect for any signs of damage during transit.
- Керектүү жабдуулар: This hydraulic jack requires an external hydraulic pump (e.g., CP-700 hand pump) for operation. Ensure you have a compatible pump available. The pump is sold separately.
- Насосту туташтыруу:
- Remove the dust cover from the 3/8-inch male connector on the hydraulic jack.
- Connect the hydraulic hose from your pump to the jack's connector. Ensure a secure, leak-free connection.
- Verify that all connections are tight before proceeding.
- Жайгашкан жери: Position the hydraulic jack on a flat, stable, and hard surface directly beneath the load to be lifted. Ensure the load is balanced and centered on the jack's saddle.
Image 5.1: The NEWTRY hydraulic jack shown alongside a recommended CP-700 hand pump, illustrating the necessary external equipment for operation.
6. Операция
Once the jack is properly set up and connected to a hydraulic pump, follow these steps for operation:
- Жүктү көтөрүү:
- Ensure the release valve on your hydraulic pump is closed.
- Operate the pump handle to build hydraulic pressure. The piston rod will extend, lifting the load.
- Lift the load gradually and observe its stability. Do not lift beyond the jack's stroke limit or rated capacity.
- Once the desired height is reached, cease pumping. The jack will hold the load in position.
- Жүктү төмөндөтүү:
- Slowly open the release valve on your hydraulic pump.
- The piston rod will retract automatically as the pressure is released, lowering the load.
- Control the lowering speed by adjusting the release valve.
- Once the load is fully lowered, ensure the jack is completely retracted before disconnecting the pump.
- Көп бурчтуу колдонуу: The jack can be used vertically, horizontally, or inverted. Always ensure the load is stable and centered, and the jack is on a firm surface, regardless of orientation.
7. Техникалык тейлөө
- Тазалоо: Keep the hydraulic jack clean and free from dirt, dust, and debris. Wipe down the exterior with a clean cloth after each use.
- Текшерүү: Regularly inspect the jack for any signs of wear, damage, or leaks. Pay close attention to the piston rod, connections, and the lacquered surface.
- Майлоо: Periodically apply a thin layer of hydraulic oil to the exposed piston rod to prevent rust and ensure smooth operation.
- Сактагыч: Store the hydraulic jack in a clean, dry environment when not in use. Ensure the piston is fully retracted to protect the rod.
- Гидравликалык суюктук: Refer to your hydraulic pump's manual for instructions on checking and refilling hydraulic fluid. Ensure only recommended hydraulic fluid is used.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жек көтөрбөйт же жай көтөрөт. | Low hydraulic fluid in pump, air in system, release valve open, pump malfunction. | Check hydraulic fluid level in pump and refill if necessary. Bleed air from the system (refer to pump manual). Ensure release valve is fully closed. Inspect pump for damage. |
| Джек гидравликалык суюктукту төгүп жатат. | Loose connections, damaged seals, damaged hose. | Tighten all connections. Inspect seals and hose for damage; replace if necessary. Contact customer support for severe leaks. |
| Piston does not retract automatically. | Residual pressure, internal obstruction, damaged spring. | Ensure release valve is fully open and all pressure is relieved. Check for any physical obstructions. If problem persists, contact customer support. |
| Jack is unstable during lifting. | Uneven surface, off-center load, overloaded. | Relocate jack to a flat, hard surface. Re-center the load on the saddle. Ensure load does not exceed 10-ton capacity. |
9. Кепилдик жана колдоо
For any issues, questions, or support regarding your NEWTRY Hydraulic Jack Cylinder, please contact NEWTRY customer service.
Байланыш маалыматы:
- Электрондук почта: aftersaleservice2018@hotmail.com
- Please provide your model number (YX504) and purchase details when contacting support.
Specific warranty details may vary by region and purchase date. Please refer to your purchase documentation for precise warranty terms.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.