PWAY PW-HT225PIR HDMI Extender User Manual

Сатып алганыңыз үчүн рахматasing the PWAY PW-HT225PIR HDMI Extender. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1 x PWAY PW-HT225PIR HDMI Extender Transmitter Unit
• 1 x PWAY PW-HT225PIR HDMI Extender Receiver Unit
• 1 x Power Adapter (DC 5V/1A)
• 1 x IR Blaster кабели
• 1 x IR кабыл алуучу кабель
• 1 x User Manual

The image displays the complete package contents for the PWAY HDMI Extender, including the transmitter and receiver units, power adapter, IR blaster and receiver cables, and the user manual.

Продукт бүттүview

The PWAY PW-HT225PIR HDMI Extender allows for the transmission of HDMI audio and video signals over a single Cat5e/6/7 cable up to 60 meters (195 feet). It supports Full HD 1080P resolution, IR control, and features an HDMI loop-out on the transmitter unit, along with EDID management for enhanced compatibility.

This image shows the PWAY HDMI Extender transmitter and receiver units, highlighting their compact design and port labels.

Негизги өзгөчөлүктөрү

• Extended Transmission: Transmits HDMI signals up to 60 meters (195 feet) over a single Cat5e/6/7 cable.
• High Definition Support: Supports resolutions up to 1920x1080@60Hz, compatible with 1080i, 720P, 720i, 480P, and 480i.
• Power over Cable (POC): Requires power connection only at the receiving end, simplifying installation.
• IR башкаруу: Allows remote control of the source device from the display location (20-60KHz).
• HDMI укурук чыгышы: Transmitter unit includes an HDMI loop-out port for a local display.
• EDID башкаруу: Built-in EDID functionality for optimal display compatibility.
• Күчтүү дизайн: Features automatic equalization and ESD electrostatic protection for stable performance.

This image illustrates the high-definition visual quality supported by the extender, showcasing the clarity of 1080P resolution.

Орнотуу нускамалары

1. HDMI булагын туташтырыңыз: Connect your HDMI source device (e.g., DVD player, PC, TV box, PS4) to the HDMI IN port of the Transmitter unit using an HDMI cable.
2. Жергиликтүү дисплейди туташтыруу (милдеттүү эмес): If you wish to have a local display near the source, connect it to the HDMI OUT (Loop Out) port of the Transmitter unit using an HDMI cable.
3. Connect Cat5e/6/7 Cable: Connect one end of a Cat5e/6/7 network cable to the UTP port on the Transmitter unit and the other end to the UTP port on the Receiver unit. Ensure the cable is properly terminated and meets the specified length requirements for optimal performance (Cat5-30m; Cat5e-40m; Cat6/7-60m).
4. Алыстан көрсөтүүчү дисплейди туташтыруу: Connect your remote display (e.g., UHDTV) to the HDMI OUT port of the Receiver unit using an HDMI cable.
5. Инфракызыл кабелдерди туташтыруу (милдеттүү эмес):
   • Connect the IR Blaster cable to the IR OUT port on the Transmitter unit and position the IR emitter near the IR sensor of your source device.
   • Connect the IR Receiver cable to the IR IN port on the Receiver unit and position the IR receiver in a location where it can receive signals from your remote control.
6. Күйгүзүү: Connect the provided power adapter to the DC 5V/1A port on the Receiver unit. Due to the POC function, only the Receiver unit requires external power.
7. Байланышты текшерүү: Once all connections are made and power is supplied, check the status indicators on both units. The PWR indicator should be lit, and the STA indicator should show a stable connection.

This diagram illustrates the typical connection setup, showing how to connect the HDMI source, transmitter, Cat5e/6/7 cable, receiver, and displays.

A detailed connection diagram showing the various ports and their connections, including DC 5V, UTP, HDMI, and IR IN/OUT.

Иштөө нускамалары

EDID башкаруу

The PWAY PW-HT225PIR HDMI Extender features EDID management to ensure compatibility with various displays. The EDID DIP switch on the transmitter unit allows you to select different EDID modes. Refer to the EDID Management Table below to choose the appropriate setting for your display configuration.

Эскертүү: Changes to the EDID DIP switch settings require a power cycle of the transmitter unit to take effect.

This image shows a DIP switch, which is used for EDID settings on the transmitter unit.

IR Control Function

The IR control function allows you to control your HDMI source device (e.g., DVD player, set-top box) from the location of your remote display. Ensure the IR Blaster and IR Receiver cables are correctly connected as described in the Setup section.

• The IR Blaster cable transmits IR signals from the transmitter unit to your source device.
• The IR Receiver cable receives IR signals from your remote control at the receiver unit.

Point your remote control at the IR Receiver connected to the extender's receiver unit to send commands to your source device.

Техникалык тейлөө

• Түзмөктү салкын, кургак жана жакшы желдетилген жерде сактаңыз.
• Avoid exposing the device to direct sunlight, high temperatures, or humidity.
• Түзмөктү жумшак, кургак чүпүрөк менен тазалаңыз. Суюк же аэрозоль тазалагычтарды колдонбоңуз.
• Сигналдын жоголушун же бузулушун алдын алуу үчүн бардык кабелдердин бекем туташтырылганын текшериңиз.
• Түзмөктү өз алдынча ачууга же тейлөөгө аракет кылбаңыз. Бардык тейлөө иштерин квалификациялуу адистерге тапшырыңыз.

Проблемаларды чечүү

No Picture or Intermittent Signal:

• Check all HDMI and Cat5e/6/7 cable connections. Ensure they are secure and not damaged.
• Verify that the Cat5e/6/7 cable length is within the specified limits (Cat5-30m; Cat5e-40m; Cat6/7-60m).
• Ensure the power adapter is correctly connected to the Receiver unit and the power indicator is on.
• Try a different HDMI cable or Cat5e/6/7 cable.
• Adjust the EDID DIP switch settings on the transmitter unit to match your display's capabilities. Power cycle the transmitter after changing EDID settings.
• If using a local display, try disconnecting it to see if the remote display works.
• Reset the receiving unit if experiencing flickering or signal drops.

Инфракызыл башкаруу иштебей жатат:

• Ensure the IR Blaster and IR Receiver cables are correctly plugged into their respective ports (IR OUT on transmitter, IR IN on receiver).
• Verify that the IR Blaster emitter is positioned directly over the IR sensor of your source device.
• Ensure the IR Receiver is positioned to receive signals from your remote control.
• Check if your remote control batteries are working.
• Note that some older satellite boxes or specific devices may not be compatible with the IR extender function.

Сүрөттүн сапаты начар:

• Ensure you are using a high-quality Cat6 or Cat7 cable for longer distances.
• Check for any kinks or damage in the Cat5e/6/7 cable.
• Verify that the source and display devices are set to compatible resolutions.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PWAY webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.