Продукт бүттүview
The Azur Z12 Wireless Bike Computer is designed to provide essential cycling data for recreational riders. It features a large, easy-to-read display and a slim, tool-free mounting design. This manual provides instructions for setup, operation, and maintenance of your Azur Z12.
Негизги өзгөчөлүктөрү
- Wireless connectivity for clean installation.
- 12 essential cycling functions.
- Slim and compact design.
- Колдонуучуга ыңгайлуу интерфейс.
- Large, clear display for easy readability.
- Куралсыз орнотуу системасы.
Жайгашуу
1. Батареяны орнотуу
The Azur Z12 requires a battery for operation. Эскертүү: A battery is included with your purchase.
- Locate the battery compartment on the back of the computer unit.
- Бөлүмдүн капкагын ачыңыз.
- Батареяны туура полярдуулукту текшерип, аны салыңыз.
- Батарея отсегин бекем жабыңыз.
2. Mounting the Computer and Sensor
The Azur Z12 features a tool-free mounting system for quick and easy installation.
- Attach the computer mount to your bicycle's handlebar or stem using the provided straps or zip ties. Ensure it is securely fastened and positioned for easy viewing.
- Mount the wireless speed sensor to the front fork of your bicycle.
- Attach the magnet to a spoke on your front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
- Slide the Azur Z12 computer unit onto the mount until it clicks into place.
3. Баштапкы конфигурация
After installation, configure the computer for accurate readings.
- Бирдикти тандоо: басыңыз РЕЖИМ button (or equivalent, assuming standard bike computer buttons) to cycle through settings. Select your preferred unit of measurement (e.g., km/h or mph).
- Wheel Circumference Input: This is crucial for accurate speed and distance measurements. Refer to your bicycle tire's sidewall for its size (e.g., 700x23c, 26x1.95) and consult a wheel circumference chart (available online or in a more detailed manual) to find the corresponding value in millimeters. Enter this value into the computer.
- Саатты жөндөө: Set the current time and choose between 12-hour or 24-hour format.
Operating Your Azur Z12
Display Modes and Functions
The Azur Z12 cycles through various data displays. Use the РЕЖИМ button (typically the left button) to switch between functions.
- Учурдагы ылдамдык: Displays your real-time speed.
- Орточо ылдамдык: Учурдагы сапарыңыздын орточо ылдамдыгын көрсөтөт.
- Максималдуу ылдамдык: Учурдагы сапарыңыз учурунда жетишилген эң жогорку ылдамдыкты жазып алат.
- Odometer (TOTAL): Displays the total accumulated distance. This value is typically stored even when the battery is removed.
- Сапар аралыгы (DST): Shows the distance covered in the current ride. This can be reset.
- Айдоо убактысы: Учурдагы сапарыңыздын узактыгын көзөмөлдөйт.
- 12/24 сааттык саат: Учурдагы убакытты көрсөтөт.
Кошумча функциялар
- Авто сканерлөө: The computer may automatically cycle through different display modes.
- Авто күйгүзүү/өчүрүү: The computer automatically turns on when motion is detected and turns off after a period of inactivity to conserve battery.
- Төмөн батарея көрсөткүчү: An icon will appear on the display when the battery level is low, indicating it's time for replacement.
Сапар маалыматтарын баштапкы абалга келтирүү
To reset trip-specific data (Trip Distance, Ride Time, Average Speed, Maximum Speed), typically press and hold the RESET button (or equivalent, often the right button) for a few seconds while in the relevant display mode. Refer to the specific button layout on your device.
Техникалык тейлөө
- Тазалоо: Компьютерди жана сенсорду жумшак, d менен сүртүңүзamp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is dry before storage or use.
- Батареяны алмаштыруу: When the low battery indicator appears, replace the battery promptly to ensure continuous operation and data integrity. Use the specified battery type (e.g., CR2032, common for bike computers).
- Sensor and Magnet Alignment: Periodically check that the speed sensor and wheel magnet remain properly aligned (within 5mm) to ensure accurate readings. Adjust if necessary.
- Сактагыч: If storing the bike computer for an extended period, consider removing the battery to prevent leakage.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей жок | Өлүк же туура эмес орнотулган батарея. | Check battery polarity or replace battery. |
| No speed reading / Incorrect speed | Sensor/magnet misalignment; Wireless interference; Incorrect wheel circumference. | Adjust sensor/magnet distance (max 5mm); Check for strong electromagnetic fields; Verify wheel circumference setting. |
| Display freezes or behaves erratically | Low battery; Temporary electronic glitch. | Replace battery; Remove and reinsert battery to reset. |
Техникалык шарттар
- Модел: Azur Z12
- Байланыш: Зымсыз
- Функциялары: Current Speed, Average Speed, Maximum Speed, Odometer, Trip Distance, Ride Time, 12/24 Hour Clock, Auto Scan, Low Battery Indicator, Auto On/Off, Unit Selection, Wheel Circumference Input.
- Салмагы: 0.12 килограмм (120 грамм)
- Монтаждоо: Куралсыз
- Кубат булагы: Батарея (кошулган)
Кепилдик жана колдоо
For warranty information or technical support regarding your Azur Z12 Wireless Bike Computer, please refer to the warranty card included with your product or contact Azur customer service through their official webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.