Introduction
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
Коопсуздук маалыматы
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool.
Электр коопсуздугу
- Ensure the power cord is compatible with the power source and is properly grounded.
- Дененин түтүктөр, радиаторлор, диапазондор жана муздаткычтар сыяктуу жерге беттери менен тийбеңиз.
- Электр шаймандарын жамгырга же нымдуу шарттарга тийгизбеңиз. Электр шайманына суу киргенде электр тогуна урунуу коркунучу көбөйөт.
- Шымды кыянаттык менен пайдаланбаңыз. Эч качан шнурду электр шайманын алып жүрүү, тартуу же электр розеткасынан сууруп алуу үчүн колдонбоңуз. Шнурды ысыктан, майдан, курч жээктерден же кыймылдуу бөлүктөрдөн алыс кармаңыз.
Жеке коопсуздук
- Ар дайым көздү коргоо (коопсуздук көз айнек же көз айнек) жана угууну коргоону тагыныңыз.
- Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
- Сергек болуңуз, эмне кылып жатканыңызды байкаңыз жана электр шайманын иштетип жатканда акыл-эстүү болуңуз.
- аша чаап алба. Ар дайым туура бутту жана тең салмактуулукту сактаңыз.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
Компоненттер
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- Суу астындагы суу насосу
- Суу Пан
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- Blade ачкычы
- Hex Wrench
Жайгашуу
Proper setup is crucial for safe and accurate operation.
1. Assemble the Stand
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
2-сүрөт: жогорудан ылдыйга view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. Fill Water Reservoir
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
Видео 1: Бүттүview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
Иштөө нускамалары
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- Рип кесүүлөрү: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- Кыбыр кесүүлөрү: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. Performing a Cut
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- Арааны күйгүзүңүз. Кесүүнү баштоодон мурун бычактын толук ылдамдыкка жетишине мүмкүнчүлүк бериңиз.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
Техникалык тейлөө
Regular maintenance ensures the longevity and performance of your tile saw.
1. Тазалоо
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. Blade Care
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- Бузуп албоо үчүн бычактарды туура сактаңыз.
3. Жалпы текшерүү
- Мезгил-мезгили менен бардык бекиткичтердин бекемдигин текшерип туруңуз.
- Электр шнурунун бузулуу белгилерин текшериңиз.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
Проблемаларды чечүү
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сау башталбайт | Электр кубаты жок, өчүргүч бузулган, өчүргүч өчүрүлгөн | Электр байланышын текшериңиз, розеткаларды текшериңиз, өчүргүчтү баштапкы абалга келтириңиз, эгер өчүргүч туура эмес болсо, кызматка кайрылыңыз. |
| Blade not cutting efficiently or chipping tiles | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| Туура эмес кесүүлөр | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
Техникалык шарттар
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- Модель номери: D36000S
- Кубат булагы: Электр зымдары
- Мотор: 15 Amp, 1220 MWO
- Тtage: 120V
- Ватtage: 1800 ватт
- Ылдамдыгы: 4200 RPM
- Бычактын диаметри: 10 дюйм
- Rip Cut Capacity: 37 inches (41 inches with plunge)
- Crosscut Capacity: 8-1/2 дюйм
- Тактыгы: 1/32 inch over 30 inches
- Элемент Салмагы: 91 фунт
- Элементтин өлчөмдөрү (L x W x Y): 36"L x 31"W x 28.75"H
- Бышактын материалы: Stainless Steel (for included blade)
- Беттик сунуш: Фарфор
- Өзгөчөлүктөр: Brake, Integrated storage, Water tray system
- Тастыктоо: UL
Кепилдик жана колдоо
For warranty information, service, or technical support, please refer to the official DEWALT webсайтына же DEWALT кардарларды тейлөө кызматына түздөн-түз кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.