Stihl FS 38

STIHL FS 38 Gasoline Brush Cutter

Instruction Manual

1. Киришүү

This manual provides essential information for the safe and efficient operation, maintenance, and care of your STIHL FS 38 Gasoline Brush Cutter. Please read this manual thoroughly before initial use and keep it in a safe place for future reference.

Максаттуу колдонуу

The STIHL FS 38 is a small, lightweight gasoline brush cutter designed for trimming lawns and clearing light vegetation around obstacles such as trees, paths, and stairs in private gardens. It is not intended for heavy-duty commercial use or cutting thick brush.

Жалпы коопсуздук маалыматы

ЭСКЕРТҮҮ: Always wear appropriate safety gear, including eye and ear protection, when operating the tool. Be aware of potential flying debris or cutting hazards, especially when using metal tools. Always follow guidelines for handling and storing fuel for gasoline-powered tools. Failure to follow these instructions may result in serious injury.

2. Продукт бүтүп калдыview

The STIHL FS 38 is characterized by its compact design and user-friendly features.

  • Adjustable loop handle for comfortable operation.
  • Оңой маневрлөө үчүн жеңил дизайн.
  • Efficient gasoline engine for reliable performance.
  • Suitable for various trimming tasks in home gardens.
STIHL FS 38 Gasoline Brush Cutter

Figure 1: The STIHL FS 38 Gasoline Brush Cutter, showcasing its compact design and adjustable loop handle.

3. Орнотуу жана чогултуу

The STIHL FS 38 requires some assembly before first use. Please follow these steps carefully.

3.1 Таңгактан чыгаруу жана текшерүү

  1. Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
  2. Inspect all parts for any signs of damage during transit. If any damage is found, do not proceed with assembly and contact your dealer.
  3. Бардык саналган компоненттердин бар экенин текшериңиз.

3.2 Иштетүү тутуму

Attach the adjustable loop handle to the shaft. Ensure it is securely fastened at a comfortable operating position. Refer to the included assembly diagram for precise placement and tightening instructions.

3.3 Guard Installation

Install the cutting attachment guard. This guard is crucial for operator safety and must always be in place during operation. Ensure it is firmly attached according to the instructions.

3.4 Fueling the Brush Cutter

The STIHL FS 38 operates on a gasoline-oil mixture.

  • Use only high-quality unleaded gasoline mixed with STIHL 2-stroke engine oil at the recommended ratio (typically 50:1, but always check the product label or a separate fuel mixing guide).
  • Күйүүчү майды таза, бекитилген күйүүчү май идишинде аралаштырыңыз.
  • Ensure the engine is cool before refueling.
  • Күйүүчү май куюучу жайдын капкагын акырындык менен ачып, басымды чыгарыңыз.
  • Fill the tank carefully, avoiding spills. Do not overfill.
  • Securely close the fuel cap after refueling.
  • ЭСКЕРТҮҮ: Fuel is highly flammable. Avoid open flames, sparks, and smoking during refueling. Refuel in a well-ventilated area.

4. Иштөө нускамалары

4.1 Операцияга чейинки текшерүүлөр

  • Күйүүчү майдын деңгээлин текшериңиз.
  • Inspect the cutting attachment for damage or wear.
  • Бардык бурамалар жана бекиткичтер бекем болушун текшериңиз.
  • Verify the cutting guard is correctly installed.
  • Wear all required personal protective equipment (PPE).

4.2 Моторду ишке киргизүү

  1. Place the brush cutter on a firm, level surface.
  2. Set the master control lever to the cold start position (choke).
  3. Press the fuel pump (primer) several times until fuel is visible in the return line.
  4. Кыймылдаткыч кыска убакытка күйгөнгө чейин стартердин шнурун бекем тартыңыз.
  5. Негизги башкаруу рычагын жарым дроссель абалына жылдырыңыз.
  6. Мотор иштей баштагыча стартердин шнурунун кайра тартыңыз.
  7. Once the engine is running, briefly blip the throttle to disengage the choke and allow the engine to warm up.

4.3 Иштөө ыкмалары

  • Hold the brush cutter firmly with both hands.
  • Туруктуу абалды сактаңыз.
  • Keep the cutting attachment away from your body and other people.
  • Use a sweeping motion to cut grass and light vegetation.
  • Avoid contact with hard objects like stones, fences, or tree trunks.
  • Do not operate the brush cutter in wet conditions or on steep slopes where you cannot maintain secure footing.

4.4 Моторду токтотуу

To stop the engine, move the master control lever to the "STOP" or "0" position.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your STIHL FS 38. Always perform maintenance tasks with the engine switched off and cool.

5.1 Ар бир колдонуудан кийин

  • Clean the brush cutter, especially the cutting head and air intake.
  • Check the cutting attachment for wear or damage. Replace if necessary.
  • Inspect the air filter and clean if dirty.
  • Check all visible screws and nuts for tightness.

5.2 Мезгил-мезгили менен тейлөө

  • Свеча: От алдыргычты текшерип, тазалаңыз. Эгерде электроддор эскирген же булганган болсо, аны алмаштырыңыз.
  • Күйүүчү май чыпкасы: Зарылчылыкка жараша күйүүчү май чыпкасын текшерип, алмаштырыңыз.
  • Редуктордун майлоосу: Check and replenish gearbox grease if applicable (refer to specific product diagrams).
  • Жалпы текшерүү: Have your brush cutter inspected by an authorized STIHL service dealer annually.

5.3 Сактоо

  • For long-term storage, drain the fuel tank completely or run the engine until it runs out of fuel.
  • Машинанын бүтүн бөлүгүн кылдаттык менен тазалаңыз.
  • Store in a dry, well-ventilated area, out of reach of children and unauthorized persons.
  • Ensure the cutting attachment is protected to prevent accidental injury.

6. Кыйынчылыктарды

This section addresses common issues you might encounter with your STIHL FS 38.

КөйгөйМүмкүн себепЧечим
Мотор иштебейтКүйүүчү май же туура эмес күйүүчү май аралашмасы жок
Spark plug fouled or defective
Муунткучтун жөндөөсү туура эмес
Күйүүчү майдын деңгээлин жана аралашмасын текшериңиз
Шамды тазалаңыз же алмаштырыңыз
Adjust choke according to starting procedure
Engine runs, but cutting attachment does not rotateClutch issue
Damaged drive shaft
Ыйгарым укуктуу тейлөөчү дилерге кайрылыңыз
Иш учурунда электр кубатын жоготууКир аба чыпкасы
Туура эмес күйүүчү май аралашмасы
Worn cutting attachment
Аба чыпкасын тазалаңыз же алмаштырыңыз
Ensure correct fuel mixture
Replace cutting attachment

For problems not listed here or if solutions do not resolve the issue, please contact an authorized STIHL service dealer.

7. Техникалык шарттар

ӨзгөчөлүкНарк
МоделSTIHL FS 38
Мотор түрүGasoline-powered 2-stroke engine
Көчүрүү27.2 см³
Power Output0.65 кВт / 0.9 л.с
Weight (without fuel, cutting tool, and guard)4.2 кг
Sound Pressure Level (with plastic tools)94 дБ(А)
Sound Pressure Level (with metal tools)96 дБ(А)
Sound Power Level (with plastic tools)108 дБ(А)
Sound Power Level (with metal tools)109 дБ(А)
Максималдуу кыймылдаткыч ылдамдыгы5000 RPM
Ассамблея талап кылынатОоба
ТүсКара
GTIN / UPC886661909322

8. Кепилдик жана колдоо

For detailed information regarding the product warranty, please refer to the separate warranty document provided with your purchase or visit the official STIHL webсайт.

For technical support, spare parts, or service, please contact your authorized STIHL dealer. A list of authorized dealers can typically be found on the official STIHL webсайт.

© 2023 STIHL. Бардык укуктар корголгон. Бул колдонмодогу маалымат эскертүүсүз өзгөртүлүшү мүмкүн.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.