WINNTEC 24 Ton Air Service Jack Y432024 Instruction Manual

1. Коопсуздук боюнча маанилүү маалымат

Read and understand all instructions and warnings before operating this air service jack. Failure to follow these instructions may result in serious injury or property damage.

• Never exceed the rated capacity of 24 tons. Overloading can cause jack failure and severe injury.
• Use only on a hard, level surface. Avoid uneven or soft ground.
• Ensure the load is centered on the jack saddle. Off-center loads can cause instability.
• Always use appropriate jack stands to support the vehicle immediately after lifting. Never rely solely on the jack to support a vehicle.
• Keep hands and feet clear of the jack mechanism and the load during lifting and lowering.
• Коргоочу көз айнек жана кол кап сыяктуу тиешелүү жеке коргонуу шаймандарын (ЖКК) кийиңиз.
• Do not modify the jack in any way. Use only genuine WINNTEC replacement parts.
• Ensure the air supply is clean, dry, and regulated to the specified pressure range.
• Inspect the jack before each use for any damage, leaks, or worn parts. Do not use if damaged.

2. Продукт бүтүп калдыview

The WINNTEC Y432024 is a robust 24-ton single-stage air service jack designed for heavy-duty lifting applications. It features an extension screw, individual extension pegs, and durable wheels for ease of movement.

1-сүрөт: Толук view of the WINNTEC 24 Ton Air Service Jack. This image displays the jack in its upright position, highlighting its sturdy construction, the long handle for maneuverability, and the heavy-duty wheels at the base. The main lifting cylinder and extension components are visible.

Негизги компоненттер:

• Lifting Cylinder: The primary hydraulic component responsible for raising the load.
• Extension Screw: Provides additional lifting height adjustment.
• Extension Pegs: Individual pegs that can be inserted to further increase lifting height.
• Аба кирүүсү: Connection point for the compressed air supply.
• Башкаруу туткасы: Used to operate the lifting and lowering functions.
• Оор дөңгөлөктөр: Facilitate easy positioning and movement of the jack.

Сүрөт 2: Жакын пландан view of the jack's lifting mechanism. This image focuses on the yellow lifting cylinder, the surrounding springs, and the top saddle, illustrating the robust design of the hydraulic lifting components.

3-сүрөт: жогорудан ылдыйга view of the jack, showing the control panel and identification label. This image provides a clear view of the operational markings, model number (Y432024), and ideal working pressure range (7-12 BAR / 100-170 PSI).

3. Орнотуу

1. Пакеттен чыгаруу: Carefully remove the jack from its packaging. Inspect for any shipping damage.
2. Туткасы Ассамблеясы: Attach the operating handle securely to the jack according to the manufacturer's instructions. Ensure all fasteners are tightened.
3. Аба менен камсыздоо байланышы: Connect a clean, dry, regulated compressed air supply to the air inlet valve. The ideal working pressure is 7-12 BAR (100-170 PSI). Do not exceed the maximum recommended pressure.
4. Purging Air System (Initial Use): Before first use, or if the jack has been stored for an extended period, it may be necessary to purge any air from the hydraulic system. Consult the manufacturer's specific instructions for this procedure, typically involving cycling the jack without a load.

4. Иштөө нускамалары

4.1 Lifting a Load

1. Иш аянтын даярдоо: Ensure the work area is clear, well-lit, and on a hard, level surface. Block wheels of the vehicle not being lifted.
2. Джекти жайгаштырыңыз: Roll the jack under the vehicle, positioning the saddle directly under the manufacturer's recommended lifting point. Ensure the jack is stable and not on an incline.
3. Аба менен камсыздоону туташтыруу: Ensure the air supply is connected and regulated to the correct pressure.
4. Engage Lifting: Operate the control handle to initiate the lifting action. The jack will begin to raise the load. Monitor the lifting process carefully.
5. Insert Jack Stands: Once the desired height is reached, immediately place appropriately rated jack stands under the vehicle's designated support points. Lower the vehicle slowly onto the jack stands.

4.2 Жүктү түшүрүү

1. Бир аз көтөрүү: If the vehicle is resting on jack stands, slightly raise the vehicle with the jack to remove the load from the stands.
2. Джек стенддерин алып салыңыз: Домкрат таянычтарын унаанын астынан этияттык менен алып салыңыз.
3. Lower the Load: Slowly operate the control handle to lower the jack. Control the descent speed to ensure a smooth and controlled lowering of the load.
4. Джекти алып салуу: Once the vehicle is fully lowered and stable on the ground, remove the jack.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your WINNTEC Air Service Jack.

• Ар бир колдонуудан мурун:
  • Inspect for any visible damage, cracks, or leaks.
  • Бардык байланыштарды жана бекиткичтерди бекемдигин текшериңиз.
  • Ensure the wheels roll freely.
  • Verify the air hose and fittings are in good condition.
• Ай сайын:
  • Clean the exterior of the jack.
  • Lubricate moving parts with light machine oil as recommended by the manufacturer.
  • Check hydraulic fluid level (if applicable and accessible). Refer to the manufacturer's specific instructions for fluid type and filling procedures.
• Сактагыч: Store the jack in a clean, dry area. Lower the ram completely before storage.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

For warranty information, technical support, or to order replacement parts, please contact WINNTEC customer service directly. Keep your purchase receipt and model number (Y432024) handy for faster service.

Refer to the official WINNTEC webакыркы байланыш маалыматтары жана кепилдик шарттары үчүн сайт же продукт таңгак.