1. Коопсуздук нускамалары
Read all instructions carefully before attempting to install this fixture. Failure to follow these instructions may result in electrical shock, fire, or other hazards.
- Бардык зымдарды квалификациялуу электрик жүргүзүшү керек.
- Орнотуудан же тейлөөдөн мурун электр энергиясын өчүрүңүз. Бул арматура Улуттук электр кодексине жана колдонулуучу жергиликтүү кодекстерге жана буйруктарга ылайык зым менен туташтырылышы керек.
- Коопсуздук үчүн туура жерге туташтыруу талап кылынат.
Эскертүү: Өрт коркунучу
- Ensure power is ӨЧҮРҮҮ before installing or maintaining the fixture. No user-serviceable parts inside.
- Жергиликтүү коддорго ылайык орнотулган комплектти жана арматураны орнотуңуз.
- Do ЖОК handle energized fixture when hands are wet, when standing in wet or damp беттер же суу.
- Do ЖОК mount near flammable materials or any heat source.
- Do ЖОК let power cords touch hot surfaces.
- Fixture is for indoor and dry location only.
2. Продукт бүтүп калдыview
The LEDONE 2x4 FT Surface Mount Frame Kit is designed to provide a secure and aesthetically pleasing surface mounting solution for 2x4 foot LED flat panels (edge-lit and back-lit) or troffer lights. This kit allows for installation on ceilings or walls where recessed mounting is not feasible.
Image 2.1: The LEDONE 2x4 FT Surface Mount Frame Kit components.
The frame is constructed from high-quality aluminum with a white coating, offering corrosion and oxidation resistance for durability in commercial or residential environments. The assembled dimensions are approximately 48.11 x 24.31 x 2.56 inches.
Image 2.2: Detailed dimensions of the 2x4 surface mount frame kit.
3. Орнотуу боюнча нускамалар
This section outlines the steps for installing the LEDONE 2x4 FT Surface Mount Frame Kit. Ensure all safety precautions are followed before beginning installation.
Керектүү куралдар (камтылган эмес):
- Бургулоо
- Screwdriver
- Өлчөө лентасы
- Карандаш
Камтылган компоненттер:
- 4 Frame pieces
- Fasteners and mounting screws
Image 3.1: Visual guide for installation steps 1 through 3.
- Рамканы чогултуу: Assemble the four pieces of the frame together and connect them using the provided screws. Ensure the frame forms a rigid rectangle.
- Рамканы орнотуу: Place the assembled frame onto the desired ceiling or wall surface. Mark the screw hole locations. Drill pilot holes if necessary, then secure the frame to the surface using the provided mounting screws. Ensure the frame is level and securely fastened.
- Prepare for Panel Insertion: Carefully dismantle one of the frame pieces (typically a short side) by removing its screws. This creates an opening to slide the LED panel fixture into the frame.
Image 3.2: Visual guide for installation step 4.
- Insert LED Panel and Re-attach Frame Piece: Slide the 2x4 LED panel light into the bracket through the opening created in Step 3. Once the panel is in place, re-attach the removed frame piece and secure it with screws.
The surface mount kit is suitable for LEDONE LOC-BLPL and LOC-TROF series panels, including 1x4, 2x2, and 2x4 sizes.
Сүрөт 3.3: Мисample of installed LED panels using the surface mount frame kits.
4. Техникалык тейлөө
The LEDONE Surface Mount Frame Kit requires minimal maintenance. Regular inspection and cleaning will help ensure its longevity and appearance.
- Тазалоо: жумшак колдонуу, damp cloth to wipe down the frame. Avoid abrasive cleaners or solvents that could damage the white coating.
- Текшерүү: Periodically check all mounting screws to ensure they remain tight and secure. If any screws appear loose, tighten them carefully.
- Зыян: If the frame becomes bent or damaged, it may compromise the secure mounting of the LED panel. Consider replacing damaged components.
5. Кыйынчылыктарды
Бул бөлүм орнотуу учурунда же андан кийин пайда болушу мүмкүн болгон жалпы көйгөйлөрдү карайт.
- Frame Not Square: If the assembled frame is not perfectly square, it may be due to uneven tightening of screws or slight manufacturing variations. Ensure all screws are tightened evenly. Minor adjustments can sometimes be made by gently flexing the frame before final tightening.
- Panel Does Not Fit: Verify that the LED panel is indeed a 2x4 foot (nominal) size and compatible with surface mount kits. Ensure that one side of the frame was fully removed as per installation step 3 to allow sufficient clearance for the panel to slide in.
- Аппараттык камсыздоо жок: While the kit is designed to include fasteners and mounting screws, occasionally items may be missing. Contact LEDONE customer support for replacement hardware if necessary.
- Frame Appears Flimsy After Assembly: Ensure all screws connecting the frame pieces are securely tightened. The frame is designed to be rigid once fully assembled and mounted.
6. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | 2X4 SMK (Troffer & Panel) |
| Продукциянын өлчөмдөрү (L x W x Y) | 48.11 x 24.31 x 2.56 дюйм (болжол менен) |
| Материал | Алюминий |
| Аяктоо түрү | Ак |
| Монтаж түрү | Surface |
| Элемент Салмагы | 5 фунт |
| Шайкештик | 2x4 ft Flat Panels (Edge-lit and Back-lit), LEDONE LOC-BLPL and LOC-TROF series |
| Сертификация | UL (for associated lighting fixtures, frame is a component) |
7. Кепилдик жана колдоо
LEDONE provides a 1-year limited warranty on this 2x4 inch surface mount kit. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or inquiries regarding missing components, please contact LEDONE customer service.
- Өндүрүүчү: LED One Corporation
- Телефон: (844) LEDONE6
- Факс: 1-510-217-9461
- Webсайт: www.ledoncorp.com