WORKPRO Cordless Hot Melt Glue Gun User Manual

Introduction

Thank you for choosing the WORKPRO Cordless Hot Melt Glue Gun. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read all instructions carefully before use and retain this manual for future reference.

Коопсуздук маалыматы

Көңүл буруңуз: Always read the product instructions carefully before using the glue gun.

• Use only the original charger or a 5V/1A charger to charge the cordless hot melt glue gun.
• This is a lithium-ion cordless hot glue gun. Always use the cordless glue gun after unplugging the charging cable.
• The glue gun's nozzle and melted glue can reach high temperatures. Avoid direct contact with skin to prevent burns.
• The surface of the glue gun is made of flame-retardant material to protect your hands from burns during normal operation.
• Балдар жетпеген жерде сактаңыз.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1 x WORKPRO 3.6V Cordless Glue Gun
• 20 x Premium Mini Hot Melt Glue Sticks
• 1 x Charger (USB cable and adapter)
• 1 x User Manual

Жайгашуу

1. Charging the Glue Gun

Before first use, ensure the glue gun is fully charged. The battery indicator lights will show the charging status.

• Connect the charger to the USB charging port located at the rear of the glue gun.
• Заряддагычты стандарттуу розеткага сайыңыз.
• The battery indicator light will be red while charging and turn green when fully charged. A full charge takes approximately 3.5 hours.
• Once fully charged, disconnect the charger before use.

2. Клей таякчасын салуу

• Ensure the glue gun is turned off and cool.
• Insert a premium mini hot melt glue stick into the circular opening at the back of the glue gun until it stops.

Иштөө нускамалары

1. Turning On and Preheating

• Press and hold the power switch (ON/OFF button) for approximately 3 seconds to turn on the glue gun.
• The working status indicator light will illuminate.
• Allow the glue gun to preheat for about 2 minutes. The advanced PTC heating system ensures rapid heating.
• Once preheated, the working status indicator will change to indicate readiness (e.g., solid green).

2. Клейди колдонуу

• Once the glue gun is preheated, gently press the trigger to dispense melted glue.
• The glue gun features a drip-free nozzle to minimize mess during use.
• The WORKPRO glue gun offers a fast dispensing speed of 0.18 oz/5 g per minute.

3. Automatic Power-Off Protection

The smart linkage switch automatically cuts off power after 8 minutes of inactivity. This feature protects the user and conserves energy.

4. Интегралдык стендди колдонуу

The glue gun includes a small bracket near the nozzle. This bracket can be folded down to act as a stand, allowing you to safely rest the hot glue gun on a surface without the hot nozzle touching it, preventing drips and potential damage.

5. Өчүрүү

To manually turn off the glue gun, press and hold the power switch for approximately 3 seconds. The automatic power-off feature will also activate after 8 minutes of inactivity.

Техникалык тейлөө

• Заряддоо: If you do not use the glue gun for a long time, remember to charge it every 15 days to maintain battery health.
• Тазалоо: Ensure the glue gun is completely cool and unplugged before cleaning. Gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Сактагыч: Store the glue gun in a dry, cool place, away from direct sunlight and extreme temperatures.

Проблемаларды чечүү

Техникалык шарттар

Продукциянын көргөзмөсү

Кепилдик жана колдоо

Кепилдиктин конкреттүү чоо-жайы жана кардарларды тейлөө байланыш маалыматы, адатта, продуктуңуздун таңгагында же өндүрүүчүнүн расмий документинде берилет. website. Please refer to those resources for comprehensive warranty coverage and assistance.