Introduction
This manual provides essential information for the safe and efficient use of your EGLO G80 E26 LED Filament Bulb, Model 204663J. Please read these instructions carefully before installation and retain them for future reference.
Figure 1: EGLO G80 E26 LED Filament Bulb, front view.
Орнотуу жана орнотуу
Follow these steps to install your LED filament bulb:
- Биринчи коопсуздук: Before attempting any installation, ensure the power supply to the light fixture is turned OFF at the circuit breaker or wall switch.
- Муздатууга уруксат берүү: Эгерде учурдагы лампочканы алмаштырып жатсаңыз, күйүп калбоо үчүн эски лампаны алып салуудан мурун аны толугу менен муздатыңыз.
- Эски лампочканы алып салуу: Carefully unscrew the old bulb from the E26 socket by turning it counter-clockwise.
- Жаңы лампочканы орнотуу: Gently screw the EGLO G80 LED Filament Bulb into the E26 socket by turning it clockwise until it is snug. Do not overtighten.
- Күчтү калыбына келтирүү: Лампочка бекем орнотулгандан кийин, жарык берүүчү шайманга электр кубатын кайра бериңиз.
Маанилүү: This bulb is designed for E26 base sockets only. Ensure your fixture is compatible before installation.
Figure 2: EGLO G80 E26 LED Filament Bulb with dimensions (Diameter 80mm x Height 120mm).
Иштөө нускамалары
The EGLO G80 LED Filament Bulb operates like a standard light bulb. Once installed in a compatible fixture with power restored, simply use the fixture's switch to turn the light ON or OFF.
- Күйгүзүү/өчүрүү: Use the wall switch or fixture switch to control the bulb's illumination.
- Өңүлбөс: This bulb is not designed for use with dimmer switches. Using it with a dimmer may cause damage to the bulb or fixture, and will void the warranty.
Figure 3: EGLO G80 E26 LED Filament Bulb illuminated in a light fixture.
Video 1: General demonstration of EGLO lighting applications. While the video title mentions 'smart bulb,' the principles of installation and light output are applicable to this EGLO LED filament bulb.
Техникалык тейлөө
The EGLO LED Filament Bulb requires minimal maintenance.
- Тазалоо: To clean the bulb, ensure the power is OFF and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Алмаштыруу: When the bulb reaches the end of its rated life, replace it with a new EGLO G80 E26 LED Filament Bulb or a compatible E26 LED bulb.
Проблемаларды чечүү
If your EGLO LED Filament Bulb is not functioning correctly, consider the following:
- Лампочка күйбөйт:
- Check if the power switch for the fixture is ON.
- Ensure the bulb is screwed in securely into the E26 socket.
- Түзмөктүн автоматтык өчүргүчүнүн өчүрүлбөгөнүн текшериңиз.
- Test the bulb in another working E26 fixture, or test another known working bulb in the original fixture to determine if the issue is with the bulb or the fixture.
- Жылтылдап:
- Ensure the bulb is not used with a dimmer switch, as this bulb is not dimmable.
- Check for loose connections in the fixture or wall switch.
If problems persist after performing these checks, consult a qualified electrician or contact customer support.
Техникалык шарттар
| Бренд | Eglo |
| Модель номери | 204663J |
| Жарык түрү | LED |
| Лампанын базасы | E26 |
| Ватtage | 3.5 Вт |
| Кызытма эквиваленти | 40 Вт |
| Жарык агымы | 400 лм |
| Түс температурасы | 2700 K (жылуу ак) |
| Түстөрдү көрсөтүү индекси (CRI) | Ra> 80 |
| Beam Angle | 320 градус |
| Rated Life | 15,000 саат |
| Тtage | 100 V |
| Power Source | AC |
| Материал | Айнек (тунук) |
| Body Size | Диаметри 80 мм х Бийиктиги 120 мм |
| Салмагы | 51 г |
| Келип чыккан өлкө | Кытай |
Кепилдик маалымат
This product comes with a warranty of up to 1 year. Please refer to the specific warranty terms and conditions provided at the time of purchase for full details regarding coverage and claims.
Кардарларды колдоо
For further assistance, technical support, or warranty claims, please contact the retailer from whom you purchased the product or refer to the EGLO official webбайланыш маалыматы үчүн сайт.