Колдонмолор+

Lepro 410084-RGB-US-NF-a

Lepro 32.8ft RGB LED Strip Lights User Manual

Model: 410084-RGB-US-NF-a

1. Киришүү

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Lepro 32.8ft RGB LED Strip Lights kit showing two rolls of LED strips, a remote control, and a power adapter.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Пакеттин мазмуну

Пакетте бардык компоненттер бар экенин текшериңиз:

  • 2 x 16.4ft (5m) RGB LED Strip Lights
  • 1 x 44 баскычтуу инфракызыл пульт
  • 1 х 12V Power адаптер
  • 1 x Control Box (IR Receiver)

3. Орнотуу жана орнотуу

Туура орнотуу үчүн бул кадамдарды аткарыңыз:

  1. Бетти даярдоо: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
  2. Өлчөө жана кесүү (кошумча): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
  3. Тилкени бекитиңиз: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
  4. Туташуу компоненттери:
    • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
    • Connect the 12V power adapter to the control box.
    • Кубат адаптерин стандарттуу электр розеткасына сайыңыз.
  5. Алыстан башкарууну иштетүү: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Diagram showing the connection of LED strip lights to the control box and power adapter, with an arrow indicating to pull out the plastic chip from the remote.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.

4. Иштөө нускамалары

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

44-key IR remote control for LED strip lights, showing buttons for colors, brightness, and dynamic modes.

Figure 3: 44-Key IR Remote Control Layout

Алыстан башкаруу функциялары:

  • Күйгүзүү/өчүрүү: Power button to turn the lights on or off.
  • Жарыктыкты жөндөө: Up/Down arrows to increase or decrease brightness.
  • Түс тандоо: 20 preset static colors, including Red, Green, Blue, and White.
  • Өз колуңуз менен жасалган түстөр: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
  • Динамикалык режимдер: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Техникалык тейлөө

LED тилкелүү лампаларыңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылуу үчүн, төмөнкү техникалык тейлөө көрсөтмөлөрүн аткарыңыз:

  • Тазалоо: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
  • Курчап турган чөйрө: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
  • Жабышкак кам көрүү: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Кыйынчылыктарды

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

КөйгөйМүмкүн себепЧечим
Жарыктар күйбөйт.
  • Кубат адаптери туташкан эмес.
  • Remote battery depleted or plastic tab not removed.
  • Incorrect connection between strip and control box.
  • Ensure power adapter is securely plugged into outlet and control box.
  • Remove plastic tab from remote battery. Replace battery if necessary.
  • Verify arrow alignment on all connectors.
Пульт иштебей жатат.
  • Алыстан башкаруу пульту инфракызыл кабыл алгычка багытталган эмес.
  • Пульт менен кабыл алгычтын ортосундагы тоскоолдук.
  • Remote battery issue.
  • Point remote directly at the small black IR receiver on the control box.
  • Бардык тоскоолдуктарды алып салыңыз.
  • Check/replace remote battery.
Кээ бир LED жарыктары туура эмес түстү көрсөтөт же өчүк.
  • Damage to a section of the LED strip.
  • Туура эмес байланыш.
  • Inspect the strip for physical damage. If a section is damaged, it may require replacement.
  • Бардык байланыштар коопсуз экенин текшериңиз.
LED strip falls off surface.
  • Surface not clean or smooth.
  • Insufficient pressure during installation.
  • Кайра колдонуудан мурун, бетин кылдаттык менен тазалаңыз.
  • Apply firm, even pressure along the entire strip during installation. Consider using additional adhesive clips for heavy-duty applications.

7. Продукттун спецификациялары

ӨзгөчөлүкДеталь
БрендЛепро
Модель номери410084-RGB-US-NF-a
ТүсRGB (Кызыл, Жашыл, Көк)
Ички/тышкы колдонууIndoor
Өзгөчө өзгөчөлүкDimmable
Жарык булагы түрүLED
Power SourceЭлектр зымдары
МатериалЖез, Пластмасса
Controller TypeАлыстан башкаруу
Жарык булактарынын саны300 (total for 32.8ft)
Тtage12 вольт
Ватtage36 ватт
Элемент Салмагы0.33 килограмм (11.6 унция)
Элементтин узундугу32.8 Feet (2 x 16.4ft)

8. Кепилдик маалыматы

Бул продукт менен капталган 2 жылдык кепилдик from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Кардарларды колдоо кызматы

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.