Introduction
Welcome to the user manual for the XENOCAM L336 Universal IR Learning Remote Control. This remote is designed to consolidate control of up to three infrared (IR) devices, such as TVs, VCRs, cable boxes, DVD players, satellite receivers, and audio systems. It features digital circulation learning technology for fast and accurate programming and retains memory even after battery replacement.
Please read these instructions carefully before using your remote control.
Продукт өзгөчөлүктөрү
- 3-in-1 functionality: Control up to three different IR devices.
- 126 programmable keys for comprehensive learning.
- Digital circulation learning technology for efficient programming.
- Permanent memory retention: Settings are saved even when batteries are removed.
- Compatible with various IR-controlled home appliances (TV, VCR, CBL, DVD, VCD, CD, SAT, HI-FI).
- Бышык ABS пластиктен жасалган.
- CE & ROHS certified.
Пакеттин мазмуну
- 1 x XENOCAM L336 Universal IR Learning Remote Control
- 1 х Колдонуучунун колдонмосу (бул документ)
Жайгашуу
Батарея орнотуу
The L336 remote control requires 2 AAA batteries (not included).
- Пульттун артындагы батарея бөлүкчөсүнүн капкагын ачыңыз.
- Туура полярдуулукту (+/-) камсыз кылуу менен 2 AAA батарейкасын салыңыз.
- Батарея уясынын капкагын жабыңыз.
Эскертүү: If the remote cannot learn or the signal light flashes erratically, replace the batteries with new ones.
Learning Function (Programming the Remote)
The L336 remote learns functions directly from your original IR remote controls. Ensure your original remote is functional and uses infrared signals.
- Окуу режимине кириңиз: Press and hold the desired equipment key (e.g., TV, Видеомагнитофон, SAT) on the L336 remote until the indicator light illuminates steadily. Then release the key.
- Позиция пульттары: Place the L336 remote and your original remote control head-to-head, approximately 1 inch apart.
- Initiate Learning: On your original remote, press the key you wish to program (e.g., Power, Volume Up). The indicator light on the L336 remote will flash quickly, indicating it has received the signal.
- Assign Function: Immediately press the corresponding key on the L336 remote where you want to store this function. The indicator light on the L336 will turn solid, confirming the function has been learned.
- Repeat for More Keys: Repeat steps 3 and 4 for all other keys you wish to learn for that device.
- Окуу режиминен чыгуу: Press the same equipment key (e.g., TV) again to exit learning mode. The indicator light will turn off.
Маанилүү: The L336 can only learn from functional IR original remotes. It does not support RF (Radio Frequency) remotes.
Image: The XENOCAM L336 Universal IR Learning Remote Control. This image illustrates the remote's design, including its array of buttons and the IR emitter at the top, which should be aligned with the original remote during the learning process.
Пультту иштетүү
After successfully programming the L336 remote, you can use it to control your devices.
- Select the desired device by pressing the corresponding equipment key (e.g., TV, Видеомагнитофон, SAT). The indicator light may briefly illuminate to confirm selection.
- Point the L336 remote towards your device and press the programmed function keys (e.g., Power, Channel Up/Down, Volume Up/Down).
Техникалык тейлөө
- Тазалоо: Пультту жумшак, кургак чүпүрөк менен сүртүңүз. Суюк тазалоочу каражаттарды же абразивдүү материалдарды колдонбоңуз.
- Батареяны алмаштыруу: Replace batteries when the remote's indicator light becomes dim or unresponsive. Always replace both batteries at the same time.
- Сактагыч: Пультту күн нурунан жана экстремалдык температурадан алыс, салкын, кургак жерде сактаңыз.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Пульт жооп бербейт. | Өлүк же туура эмес салынган батарейкалар. | Батареянын полярдуулугун текшерип, жаңы AAA батарейкалары менен алмаштырыңыз. |
| Learning fails (indicator light flashes quickly but doesn't turn solid). | Original remote is not IR, original remote is not working, or remotes are too far apart/misaligned. | Ensure original remote is IR and functional. Position remotes head-to-head, 1 inch apart. Try again. |
| Learned function does not work correctly. | Learning error or signal interference. | Repeat the learning process for that specific key. Ensure no obstructions during learning. |
| Remote loses programmed functions after battery change. | This remote features permanent memory retention. If this occurs, it indicates a fault. | Кардарларды колдоо кызматына кайрылыңыз. |
Техникалык шарттар
- Модел: L336
- Материал: ABS пластик
- Learning Keys: 126
- Колдоого алынган түзмөктөр: Up to 3 (TV, VCR, CBL, DVD, VCD, CD, SAT, HI-FI, etc.)
- Learning Technology: Digital Circulation IR Learning
- Эстутум: Permanent retention
- Күч: 2 x AAA Батареялар (киргизилген эмес)
- Өлчөмдөрү: Болжол менен 8.86 x 1.18 x 1.14 дюйм
- Салмагы: Болжол менен 2.39 унция
- Сертификаттар: CE, ROHS
Кепилдик жана колдоо
This product is designed for reliability and performance. For any questions, technical assistance, or warranty inquiries, please contact XENOCAM customer support.
Кепилдиктин конкреттүү шарттары жана байланыш маалыматы үчүн сатып алуу документтерин караңыз.