FNNEMGE 4000A 21800mAh Portable Jump Starter

Introduction

This manual provides detailed instructions for the safe and effective use of your FNNEMGE 4000A 21800mAh Portable Jump Starter. This device is designed to jump-start 12V vehicles (up to 8.0L gasoline or 6.5L diesel engines) and also functions as a portable power bank and LED flashlight. Please read this manual thoroughly before operation and retain it for future reference.

Маанилүү коопсуздук маалыматы

Your FNNEMGE Jump Starter is equipped with 10 intelligent safety mechanisms to ensure safe operation. These protections include:

• Учкундан коргоо
• Zero Damage Protection
• Low Voltage Коргоо
• Жогорку температурадан коргоо
• Кыска туташуулардан коргоо
• Полярдуулукту кайтаруу
• Voltage Коргоо
• Ашыкча заряддан коргоо
• Reverse Charge Protection
• Ашыкча ток коргоо

Always follow these general safety guidelines:

• Агрегатты сууга салбаңыз.
• Эгерде ал бузулган болсо, аны иштетпеңиз.
• Балдар жетпеген жерде сактаңыз.
• Колдонуу жана кубаттоо учурунда туура желдетүүнү камсыз кылыңыз.
• Do not attempt to jump-start vehicles with voltag12Вдан башкалары.

Image: The FNNEMGE Jump Starter highlighting its 10 advanced safety protections, including spark-proof, zero damage, low voltage, high temperature, short circuit, reverse polarity, over voltage, over charge, reverse charge, and overcurrent protection.

Пакеттин мазмуну

Пакетиңизде бардык буюмдар бар экенин текшериңиз:

• 1 x FNNEMGE Portable Jump Starter
• 1 x Smart Jumper Cable Set
• 1 х USB-C кубаттоо кабели
• 1 x User Manual

Image: The FNNEMGE Portable Jump Starter, its smart jumper cables, and the USB-C charging cable, representing the complete package contents.

Продукт бүттүview

Компоненттер

The FNNEMGE Jump Starter features a compact design with essential components for vehicle starting and portable power.

• Негизги блок: Houses the battery, control circuitry, and display.
• Акылдуу секирүүчү кабелдер: Equipped with safety features and indicators.
• USB-C киргизүү/чыгаруу порту: For charging the unit and other devices.
• USB чыгуу порту: For charging other devices.
• LED фонарик: Integrated light with multiple modes.

Интеллектуалдык LCD дисплей

The 2.6-inch LCD screen provides comprehensive information about the device's status, including battery level, input/output indications, and temperature alerts.

Image: The FNNEMGE Jump Starter's 2.6-inch intelligent LCD display, clearly showing battery percentage, IN/OUT indicators, and temperature warnings for easy monitoring of operational status.

Setup: Charging the Jump Starter

Before initial use, fully charge the jump starter. It is recommended to recharge the unit after each use to maintain optimal performance.

1. Connect the provided USB-C charging cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB-C cable to a compatible USB wall adapter (not included) or a car charger.
3. The LCD display will show the charging status and battery percentage. Дисплей 100% көрсөтүлгөнгө чейин кубаттаңыз.

The unit can also be charged via its USB-C port from a power source.

Иштөө нускамалары

1. Унааны баштоо

This jump starter is designed for 12V vehicles with up to 8.0L gasoline or 6.5L diesel engines.

1. 1-кадам: Ensure the jump starter has sufficient charge (at least 50% recommended). Insert the blue end of the smart jumper cable into the jump starter's 12V output port. Ensure a secure connection.
2. 2-кадам: кызыл cl туташтырууamp (+) to the positive terminal of your vehicle's battery and the black clamp (-) to the negative terminal. The smart cable's indicator light will show the connection status.
3. 3-кадам: Once the smart cable indicates a safe connection (usually a solid green light), return to your vehicle and start the engine.
4. 4-кадам: After the engine starts, immediately remove the jumper cables from the vehicle battery terminals, then disconnect the smart cable from the jump starter.

Image: A visual guide demonstrating the four steps to jump-start a car: 1. Insert the jump cable into the jump starter. 2. Connect the clamps to your car battery. 3. Start your car engine. 4. Remove the clamps to complete the operation.

Эскертүү: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. If the smart cable shows an error, refer to the troubleshooting section.

Image: The FNNEMGE Jump Starter in an engine bay, connected to a car battery, illustrating its capacity to deliver 4000A peak current, suitable for 8.0L gas and 6.5L diesel engines, providing 12 Volts for up to 60 starts.

2. Power Bank катары колдонуу

Стартер USB чыгаруу порттору аркылуу ар кандай электрондук түзүлүштөрдү кубаттай алат.

• Connect your device's USB charging cable to one of the jump starter's USB output ports (USB1 or USB-C).
• The LCD display will indicate "OUT" when charging is active.
• The 21800mAh capacity allows for multiple charges of smartphones, tablets, and other USB-powered devices.

Image: The FNNEMGE Jump Starter functioning as a 21800mAh power bank, connected via USB to charge a smartphone and wireless earbuds, demonstrating its versatility for various digital devices.

3. Светодиоддук кол чыракты колдонуу

The integrated LED flashlight offers three modes for different situations:

• Normal Light: Press the flashlight button once for continuous illumination.
• SOS режими: Press the button a second time for an SOS signal (three short, three long, three short flashes).
• Strobe режими: Press the button a third time for a rapid strobe light.
• Press the button a fourth time to turn off the flashlight.

Image: A mechanic utilizing the FNNEMGE Jump Starter's LED flashlight to illuminate an engine bay, with icons indicating its three modes: normal light, SOS signal, and strobe light, useful for dark conditions or emergencies.

Техникалык тейлөө

Сактагыч

• Секирүү стартерди күн тийбеген, салкын, кургак жерде сактаңыз.
• For long-term storage, ensure the unit is charged to at least 50% and recharge every 3-6 months to prevent battery degradation.
• Keep away from flammable materials and extreme temperatures.

Тазалоо

• Агрегатты жумшак, кургак чүпүрөк менен сүртүңүз.
• Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонбоңуз.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

FNNEMGE offers a 2 жылдык кепилдик for this product, along with lifetime technical support and 24/7 customer service.

If you encounter any questions or issues during use, please contact us via the email address provided in the user manual included with your product package.