BWT P'URE AQUACALCIUM Reverse Osmosis System

1. Киришүү

Thank you for choosing the BWT P'URE AQUACALCIUM Reverse Osmosis System. This system is designed to provide high-quality filtered water for domestic use, incorporating a remineralizing cartridge to enhance water properties. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance of your system.

2. Коопсуздук маалыматы

• Суу агып кетпеши үчүн бардык туташуулардын коопсуз экенин текшериңиз.
• Системаны нөл температурага дуушар кылбаңыз.
• Use only genuine BWT replacement cartridges.
• Disconnect water supply before performing any maintenance.
• Эгерде сиз орнотуунун кандайдыр бир кадамдары боюнча күмөн санасаңыз, квалификациялуу сантехникке кайрылыңыз.

3. Продукт бүтүп калдыview

The BWT P'URE AQUACALCIUM system utilizes reverse osmosis technology to purify water, followed by a remineralization stage. Key components include the filtration unit, a storage tank, and a dedicated faucet.

This image displays the complete BWT P'URE AQUACALCIUM reverse osmosis system. It includes the main filtration unit with multiple cartridges (Coconut Carbon Filter, AquaCalcium, PURE Membrane), a chrome faucet, and a white pressure tank for purified water storage. The system is designed for under-sink installation.

Компоненттер камтылган:

• Reverse Osmosis Filtration Unit
• Кран
• Storage Tank (11 liters capacity)
• Remineralizing Cartridge
• Installation Kit (tubing, connectors, saddle valve)

4. Орнотуу жана орнотуу

The BWT P'URE AQUACALCIUM system is designed for under-sink installation. Follow these general steps for setup:

1. Даярдоо: Turn off the cold water supply to your sink. Clear the area under the sink for installation.
2. Кран орнотуу: Drill a hole in your sink or countertop (if not already present) for the dedicated faucet. Secure the faucet according to its specific instructions.
3. Суу менен камсыздоо байланышы: Install the saddle valve onto the cold water line and connect it to the RO system's inlet.
4. Дренаж туташуусу: Install the drain saddle onto the sink's drainpipe and connect it to the RO system's drain line.
5. Танк туташтыруу: Connect the storage tank to the RO system.
6. Системаны тазалоо: After all connections are made, slowly turn on the cold water supply. Allow the system to fill and flush for several hours (refer to detailed instructions for specific flushing times) to remove air and carbon fines.
7. Агып кетүүнү текшерүү: Carefully inspect all connections for leaks.

Эскертүү: Refer to the detailed installation guide provided in the product packaging for specific diagrams and step-by-step instructions.

5. Иштөө нускамалары

Once installed and flushed, your BWT P'URE AQUACALCIUM system operates automatically. The system purifies water using reverse osmosis and stores it in the pressure tank. When you open the dedicated faucet, purified water is dispensed.

• Биринчи колдонуу: After initial flushing, the first tank of water should be drained completely to ensure optimal taste and performance.
• Daily Filtration Capacity: The system can filter up to 280 liters per day, depending on water pressure and temperature.
• Суу бөлүштүрүү: Open the dedicated faucet to draw purified water. The flow rate will decrease as the tank empties.
• Резервуарды толтуруу: The system will automatically refill the storage tank once water is drawn.

6. Техникалык тейлөө

Regular maintenance is crucial for the optimal performance and longevity of your BWT P'URE AQUACALCIUM system.

Картриджди алмаштыруу:

The system does not feature an automatic cartridge wear indicator. Therefore, it is essential to adhere to a regular replacement schedule for the pre-filters, RO membrane, and remineralizing cartridge.

• Алдын ала чыпкалар (Чөкмө жана көмүртек): Replace every 6-12 months, depending on water quality and usage.
• RO мембранасы: Replace every 2-3 years, or when water production significantly decreases.
• Remineralizing Cartridge: Replace annually to ensure continued remineralization and optimal taste.

Алмаштыруу процедурасы:

1. Turn off the water supply to the RO system and open the faucet to relieve pressure.
2. Carefully remove the old cartridges.
3. Insert new, genuine BWT replacement cartridges, ensuring proper orientation.
4. Turn on the water supply slowly and check for leaks.
5. Flush the system as per initial setup instructions to prepare new cartridges for use.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation included with your product or contact BWT customer service. Keep your proof of purchase for warranty claims.

Availability of spare parts information is currently unavailable.