Introduction
This manual provides essential information for the safe and effective use of your BIG RED AT83502T-3AB Torin Hydraulic Jack Pad. This durable rubber pad is designed to protect vehicle frame rails and undercarriages when using a hydraulic floor jack. It features a universal fit and a dual-sided design for various jacking points.
Коопсуздук маалыматы
- Always ensure the vehicle is on a flat, stable surface before attempting to lift it.
- Домкрат гана таянып турган унаанын астында эч качан иштебеңиз. Always use appropriate jack stands to support the vehicle after lifting.
- Verify the jack pad is correctly seated on both the jack saddle and the vehicle's jacking point before applying load.
- Inspect the jack pad for wear or damage before each use. Do not use if cracked, torn, or excessively worn.
- Do not exceed the load capacity of your floor jack or the jack pad.
- Keep hands and feet clear of the jack and vehicle during lifting and lowering operations.
Продукт өзгөчөлүктөрү
- Durable Rubber Construction: Made from robust rubber for enhanced cushioning and crush resistance.
- Эки тараптуу дизайн: Features a slotted side for frame rails and a reverse side for flat surfaces, offering versatile application.
- Paint and Metal Protection: Designed with a special pattern to prevent damage to vehicle paint, metal gouging, and scraping.
- Universal Fit: Compatible with most standard hydraulic floor jacks and vehicles.
- Increased Jack Height: Adds approximately one inch (2.54 cm) to the jack's height, providing additional clearance.
Image: The BIG RED AT83502T-3AB jack pad illustrating its dual-sided design. One side features slots for frame rails, and the reverse side is flat for other jacking points.
Орнотуу жана орнотуу
- Prepare the Jack: Ensure your hydraulic floor jack is clean and in good working order.
- Туура тарапты тандаңыз:
- For vehicles with pinch welds or frame rails, use the slotted side of the jack pad.
- For flat jacking points, such as subframes or differential housings, use the flat reverse side.
- Тасманы жайгаштырыңыз: Place the selected side of the jack pad securely onto the saddle of your hydraulic floor jack. The groove at the bottom of the pad is designed to fix it to the jack's saddle.
- Туруктуулукту текшерүү: Ensure the pad is stable on the jack saddle before positioning the jack under the vehicle.
Image: The BIG RED AT83502T-3AB jack pad positioned on the saddle of a red hydraulic floor jack, demonstrating its universal fit.
Иштөө нускамалары
- Унаа даярдоо: Park the vehicle on a firm, level surface. Engage the parking brake and block the wheels that will remain on the ground.
- Джекти жайгаштырыңыз: Roll the hydraulic floor jack, with the pad installed, under the designated jacking point of the vehicle. Ensure the pad is directly under the jacking point and properly aligned.
- Унааны көтөрүңүз: Operate your hydraulic floor jack according to its manufacturer's instructions to slowly raise the vehicle. Observe the jack pad to ensure it remains stable and securely grips the vehicle's jacking point.
- Install Jack Stands: Once the vehicle is at the desired height, immediately place appropriately rated jack stands under the vehicle's designated support points. Lower the vehicle slowly onto the jack stands.
- Унааны түшүрүңүз: When work is complete, raise the vehicle slightly with the jack to remove the jack stands. Then, slowly lower the vehicle to the ground using the jack's release mechanism.
- Джекти алып салуу: Once the vehicle is fully on the ground, remove the hydraulic floor jack and the jack pad.
Image: A hydraulic jack with the BIG RED AT83502T-3AB jack pad lifting a vehicle, demonstrating proper application.
Техникалык тейлөө
- Тазалоо: Wipe the jack pad clean with a damp cloth after each use to remove dirt, grease, or debris.
- Текшерүү: Regularly inspect the rubber pad for any signs of wear, cracks, tears, or deformation. Replace the pad immediately if any damage is observed.
- Сактагыч: Store the jack pad in a clean, dry place away from direct sunlight and extreme temperatures to prolong its lifespan.
Проблемаларды чечүү
The BIG RED AT83502T-3AB jack pad is a simple accessory. Most issues relate to improper use or compatibility.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Pad slips or is unstable on jack saddle. | Incorrect placement; saddle or pad is dirty/greasy; pad not compatible with jack saddle shape. | Ensure pad is fully seated and clean. Verify compatibility with your specific jack model. |
| Pad damages vehicle jacking point. | Incorrect side of pad used; pad is worn/damaged; excessive load. | Use the appropriate side (slotted for frame rails, flat for flat surfaces). Inspect pad for damage. Ensure load capacity is not exceeded. |
| Pad deforms or cracks prematurely. | Exceeding load capacity; improper storage (e.g., extreme temperatures, chemicals); manufacturing defect. | Adhere to load limits. Store properly. If new and damaged, contact support for warranty. |
Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Модель номери | AT83502T-3AB |
| Материал | Туруктуу резина |
| Түс | Кара |
| Диаметри | Болжол менен 10 см (4 дюйм) |
| Калыңдыгы | Болжол менен 2.54 см (1 дюйм) |
| Элементтин өлчөмдөрү (L x W x Y) | 10.6 x 10.6 x 2.7 Сантиметр |
| Элемент Салмагы | 178.6 г (6.3 унция) |
| Унаанын шайкеш түрү | Car (Universal Fit for most floor jacks and vehicles) |
Image: A diagram illustrating the key dimensions of the jack pad, including its 4-inch diameter and 1-inch thickness.
Кепилдик жана колдоо
This BIG RED AT83502T-3AB Torin Hydraulic Jack Pad includes a чектелген 1 жылдык өндүрүүчү кепилдик.
For warranty claims, technical assistance, or product inquiries, please contact Torin customer support. Refer to your purchase documentation for specific contact details or visit the official BIG RED/Torin webсайт.
Өндүрүүчүнүн Байланыш маалыматы: ISSAQUAH, WA, 98027 US