atolla Laser Distance Meter T201-DE User Manual

1. Киришүү

Thank you for choosing the atolla T201-DE Laser Distance Meter. This device is designed for precise and efficient distance, area, and volume measurements, suitable for both indoor and outdoor applications. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

Image 1.1: The atolla T201-DE Laser Distance Meter, shown with included AAA batteries and wrist strap.

2. Коопсуздук маалыматы

WARNING: Laser Radiation

This device emits Class 2 laser radiation. Do not stare into the laser beam. Do not aim the laser beam at people or animals. Avoid direct eye exposure. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Always ensure the laser is not pointed at reflective surfaces that could redirect the beam into your eyes or others'.
• Аппаратты балдар жетпеген жерде сактаңыз.
• Do not attempt to modify or disassemble the device. This could lead to hazardous laser exposure and voids the warranty.
• Operate the device only in well-lit areas to avoid accidental exposure.

3. Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

• 1 x atolla Laser Distance Meter T201-DE
• 2 x AAA 1.5V батарейкалар
• 1 Билек боонун х
• 1 x User Manual

4. Продукт бүтүп калдыview

The atolla T201-DE features a compact design with an intuitive button layout and a clear backlit LCD for easy operation and reading.

Сүрөт 4.1: Детальдуу view of the atolla T201-DE Laser Distance Meter's control panel, highlighting the function buttons and their labels.

Баскыч функциялары:

5. Орнотуу

5.1 Батареяны орнотуу

1. Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
2. Капкакты жылдырыңыз.
3. Туура полярдуулукту (+/-) камсыз кылып, эки AAA 1.5V батарейканы салыңыз.
4. Батарея уясынын капкагын бекем жабыңыз.

Note: Always use new batteries and replace both batteries at the same time. Remove batteries if the device will not be used for an extended period.

6. Иштөө нускамалары

6.1 Күйгүзүү/өчүрүү

• Күйгүзүү үчүн: басыңыз ON / READ баскычы.
• Өчүрүү үчүн: басып, кармап туруңуз OFF / Return баскычын 2 секунд басып туруңуз, болбосо түзмөк 180 секунд аракетсиз тургандан кийин автоматтык түрдө өчөт.

6.2 Өлчөө бирдиктерин өзгөртүү

The device supports meters (m), inches (in), and feet (ft) with fractional display. To change units:

• басыңыз +/- UNIT Жеткиликтүү бирдиктерди карап чыгуу үчүн баскычын кайра-кайра басыңыз.

Image 6.1: Visual guide showing how to change the display units (meters, inches, feet) on the atolla T201-DE Laser Distance Meter.

6.3 Setting Measurement Reference Point

The measurement can be taken from the front or the rear edge of the device.

• басыңыз Reference Point / Mute button to toggle between front and rear reference points. An icon on the display will indicate the selected reference point.

Image 6.2: Comparison showing how the measurement reference point can be set from the front or the rear of the atolla T201-DE Laser Distance Meter.

6.4 Негизги өлчөө (бир аралык)

1. Түзмөк күйгүзүлгөнүн текшериңиз.
2. Лазерди максаттуу бетке багыттаңыз.
3. басыңыз ON / READ button once. The measured distance will be displayed.

6.5 Үзгүлтүксүз өлчөө (Min/Max)

This mode is useful for finding the shortest or longest distance from a fixed point.

1. басып, кармап туруңуз ON / READ button for 2 seconds. The device will start continuous measurement.
2. Slowly sweep the laser across the desired area. The display will show the current, minimum, and maximum measured distances.
3. басыңыз ON / READ Үзгүлтүксүз өлчөөнү токтотуу үчүн баскычты кайра басыңыз.

6.6 Аянтты өлчөө

1. басыңыз Аянт/Көлөм/Пифагор button once to enter Area measurement mode. A square icon will appear on the display.
2. Measure the length: Press ON / READ.
3. Measure the width: Press ON / READ.
4. Түзмөк автоматтык түрдө аянтты эсептеп, көрсөтөт.

6.7 Көлөмдү өлчөө

1. басыңыз Аянт/Көлөм/Пифагор button twice to enter Volume measurement mode. A cube icon will appear on the display.
2. Measure the length: Press ON / READ.
3. Measure the width: Press ON / READ.
4. Measure the height: Press ON / READ.
5. Түзмөк автоматтык түрдө көлөмдү эсептеп, көрсөтөт.

6.8 Пифагордук өлчөө (кыйыр өлчөө)

This mode allows for indirect measurement of heights or distances using the Pythagorean theorem.

Image 6.3: Illustrations demonstrating different measurement modes: Area measurement, Volume measurement, and Pythagorean measurement using two points.

6.8.1 2-Point Pythagorean Measurement (Height)

1. басыңыз Аянт/Көлөм/Пифагор button three times. The display will show a right-angle triangle icon with two sides to be measured.
2. Measure the hypotenuse (distance from device to top of object): Press ON / READ.
3. Measure the base (distance from device to bottom of object, ensuring the device remains level): Press ON / READ.
4. The device will calculate and display the height.

6.8.2 3-Point Pythagorean Measurement (Height)

1. басыңыз Аянт/Көлөм/Пифагор button four times. The display will show a right-angle triangle icon with three sides to be measured.
2. Measure the first hypotenuse (distance from device to top of object): Press ON / READ.
3. Measure the second hypotenuse (distance from device to middle point of object): Press ON / READ.
4. Measure the base (distance from device to bottom of object, ensuring the device remains level): Press ON / READ.
5. The device will calculate and display the height.

6.9 Кошуу жана кемитүү

You can add or subtract measurements from each other.

1. Perform a measurement.
2. басыңыз +/- UNIT button once for addition (+) or twice for subtraction (-).
3. Perform the next measurement.
4. The result of the addition or subtraction will be displayed.

6.10 Маалыматтарды сактоо жана кайра чакырып алуу

Аппарат 20 өлчөө жазуусун сактай алат.

Image 6.4: The atolla T201-DE Laser Distance Meter displaying stored measurements, with a compass and blueprints in the background, illustrating its use for planning.

• Measurements are automatically saved.
• To recall stored data: Press the OFF / Return button repeatedly when not in a measurement mode to cycle through the stored records.

6.11 Үнсүз кылуу функциясы

The mute function allows for silent operation, ideal for quiet environments.

Image 6.5: Image depicting the mute function of the atolla T201-DE Laser Distance Meter, suitable for quiet environments like libraries or offices.

• басып, кармап туруңуз Reference Point / Mute button for 2 seconds to toggle the sound on/off. A speaker icon with a cross will indicate mute mode.

6.12 Автокалибрлөө

The device features an auto-calibration function to maintain accuracy. If you suspect the accuracy is off, you can adjust it.

• Түзмөк өчүп турганда, басып, кармап туруңуз ON / READ баскычы жана OFF / Return button simultaneously until 'CAL' appears on the screen.
• колдонуу +/- UNIT button to adjust the calibration value (typically +/- 7 mm).
• Басыңыз ON / READ to save the calibration and exit.

7. Техникалык тейлөө

• Тазалоо: жумшак колдонуу, damp Түзмөктү тазалоо үчүн чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: Түзмөктү кургак, салкын жерде, түз күн нурунан жана өтө жогорку температурадан алыс сактаңыз. Узак убакытка сактасаңыз, батареяларды алып салыңыз.
• Коргоо: The device has an IP54 rating, making it dust and splash-water resistant. However, avoid submerging it in water or exposing it to heavy rain.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

atolla products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official atolla webсайт.