XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable Instruction Manual

1. Киришүү

This manual provides detailed instructions for the installation and operation of the XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable. This cable is designed to provide both data transfer and power supply for internal Serial ATA (SATA) devices, simplifying connections within a computer system.

Image 1.1: Two XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cables. Each cable features a SATA 7-pin data connector, a SATA 15-pin power connector, and an IDE 4-pin power connector.

2. Продукциянын өзгөчөлүктөрү

• Интегралдык дизайн: Combines SATA 22-pin (15+7 pin) data and power into a single cable, eliminating the need for separate data and power cables.
• Жогорку ылдамдыктагы маалыматтарды өткөрүп берүү: Supports SATA III 6 Gbps data transfer rates, backward compatible with SATA I and SATA II. Actual transfer speed is dependent on the connected device's rating.
• Кеңири шайкештик: Compatible with various SATA devices including hard disk drives (HDDs), solid-state drives (SSDs), optical drives, DVD burners, and PCI cards.
• Кубат туташуу: Features an IDE 4-pin to SATA 15-pin power connection, supporting multi-voltagе шайкештик.
• Ысык сайууну колдоо: Designed for hot-plugging without requiring driver installation.
• Туруктуу курулуш: The flat SATA data cable has a soft sheath for flexible installation, and the power cord is covered with an insulated braided sheath to prevent heat generation.
• Узундугу: Each cable measures 50cm (19.7 inches) in length.

Image 2.1: Diagram illustrating the 50cm length of both the SATA 7-pin data cable segment and the IDE-SATA 15-pin power cable segment.

Image 2.2: Visual representation of SATA III 6 Gbps data transfer capability and compatibility with HDDs, SSDs, RAID controllers, optical drives, and DVD drives, utilizing an IDE 4-pin power cable.

3. Орнотуу боюнча колдонмо

Follow these steps to properly install the XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable:

1. Системаңызды даярдаңыз: Ensure your computer is powered off and unplugged from the wall outlet before opening the case.
2. Туташтыргычтарды табыңыз: Identify the SATA data port on your motherboard or host controller and an available IDE 4-pin power connector from your power supply unit (PSU).
3. Түзмөккө туташуу: Connect the SATA 22-pin (15+7 pin) end of the cable to your SATA hard drive, SSD, or optical drive. Ensure the connection is firm and the stainless steel clip engages securely.


Сүрөт 3.1: Жакын план view of the 7-Pin SATA data connector, highlighting the L-type key receptacle and the stainless steel clip designed for secure attachment.



Image 3.2: The XMSJSIY SATA 2-in-1 cable properly connected to a hard disk drive, showing both data and power connections.

4. Connect Data to Motherboard: Plug the 7-pin SATA data connector into an available SATA port on your motherboard or host controller.
5. Connect Power to PSU: Connect the IDE 4-pin power connector to an available IDE 4-pin power cable from your PSU.
6. Кабелдик башкаруу: Route the cable neatly within your computer case to ensure proper airflow and prevent interference with other components. The flat design of the data cable assists with organization.
7. Secure and Power On: Close your computer case, plug in the power cord, and power on your system. The connected device should now be recognized by your operating system.

4. Операция

Once installed, the XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable operates automatically to provide both data transfer and power to your connected SATA device.

• Маалыматтарды өткөрүү: The cable facilitates high-speed data communication between your motherboard/host controller and the SATA device.
• Кубат жеткирүү: It supplies the necessary electrical power from your PSU to the SATA device.
• Plug and Play: The cable supports plug-and-play functionality, meaning no additional drivers are typically required for basic operation.
• Hot-Plugging: This cable supports hot-plugging, allowing you to connect or disconnect compatible SATA devices while the system is running, provided your motherboard and operating system also support this feature.

Image 4.1: Illustration of the plug-and-play capability of the cable when connecting to a hard disk or an optical drive.

5. Техникалык шарттар

6. Кыйынчылыктарды

If you encounter issues with your XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable, consider the following troubleshooting steps:

• Түзмөк аныкталган жок:
  • Ensure all cable connections (SATA data, SATA power, IDE power) are securely seated.
  • Verify that the SATA port on your motherboard is enabled in the BIOS/UEFI settings.
  • Test the cable with a different SATA device or test the device with a different SATA cable to isolate the problem.
• Жай берилиштерди өткөрүү ылдамдыгы:
  • Confirm that both your motherboard's SATA port and the connected device support SATA III (6 Gbps). The cable's speed is limited by the slowest component.
  • Check for updated motherboard drivers.
• Кубат маселеси:
  • Энергия менен камсыздоо блогуңузда (PSU) жетиштүү ват бар экенин текшериңизtage to power all connected devices.
  • Verify the IDE 4-pin power connection from the PSU is functional.

7. Кепилдик жана колдоо

For warranty information or technical support regarding your XMSJSIY SATA 6G Data and Power 2-in-1 Extension Cable, please refer to the product packaging or contact XMSJSIY customer service directly. Contact details can typically be found on the manufacturer's official webсайт же продукт сатылып алынган сатуучу аркылуу.