Xvive U2 гитара зымсыз системасынын колдонуу боюнча колдонмосу

1. Киришүү

The Xvive U2 Guitar Wireless System provides a reliable and high-quality wireless connection for your musical instruments. Operating on the 2.4GHz band, it offers uncompressed digital signal transmission with low noise and minimal latency, suitable for various performance and practice environments. This manual provides instructions for the proper setup, operation, and maintenance of your U2 wireless system.

1.1-сүрөт: The Xvive U2 Guitar Wireless System, featuring both the transmitter and receiver units in carbon finish.

2. Негизги өзгөчөлүктөрү

• 2.4GHz Digital Transmission: Provides uncompressed, low-noise, and low-latency audio.
• Ультра төмөн кечигүү: Less than 5ms delay for real-time performance.
• Кеңейтилген диапазон: Effective operating range of approximately 90 feet (27 meters) outdoors, line-of-sight.
• Бир нече каналдар: Supports simultaneous broadcasts on 4 selectable channels to prevent interference.
• Кайра заряддалуучу батарея: Built-in lithium battery offers up to 5 hours of continuous use on a full charge.
• Ийкемдүү дизайн: 220° rotatable plug for compatibility with various instrument jack placements.
• Кеңири шайкештик: Suitable for most electric guitars, bass, keyboards, and other electronic musical instruments with a 1/4-inch output.

2.1-сүрөт: Бүттүview of the Xvive U2 system's technical specifications, including audio frequency response, working range, dynamic range, battery life, and delay time.

3. Орнотуу нускамалары

3.1 Пакеттин мазмуну

Улантуудан мурун, бардык компоненттер бар экенин текшериңиз:

• 1 x Xvive U2 Transmitter Unit
• 1 x Xvive U2 Receiver Unit
• 1 x USB заряддоо кабели
• Колдонуучунун Колдонмосу (бул документ)

3.2 Алгачкы заряддоо

It is recommended to fully charge both the transmitter and receiver units before first use. Connect the included USB charging cable to both units and a standard USB power adapter (not included). The charging indicator light will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2 hours.

3.3 Түзмөктөрдү туташтыруу

1. Өткөргүчтү туташтырыңыз: Plug the transmitter unit into your instrument's 1/4-inch output jack. Adjust the 220° rotatable plug for optimal fit and comfort.
2. Алуучуну туташтыруу: Plug the receiver unit into the input of your ampкөтөргүч, педаль тактасы же аудио интерфейси.
3. Күйгүзүү: Turn on both the transmitter and receiver units by sliding their respective power switches to the "ON" position.
4. Каналды жупташтыруу: The units will automatically attempt to pair. If they do not connect, or if you experience interference, you may need to manually select a channel. See Section 4.2 for channel selection.

3.1-сүрөт: Diagram illustrating the connection of the Xvive U2 transmitter to an instrument and the receiver to an amplifier or pedalboard.

3.2-сүрөт: Жакын план view of the Xvive U2 transmitter connected to a guitar, highlighting its compact design and rotatable plug.

4. Иштөө нускамалары

4.1 Негизги операция

Once both units are powered on and paired, the system is ready for use. The audio signal from your instrument will be wirelessly transmitted to your amplifier or audio device. Ensure your instrument's volume is set appropriately.

4.1-сүрөт: The Xvive U2 transmitter connected to an electric guitar during use.

4.2 Канал тандоо

The Xvive U2 system offers 4 channels to minimize interference. If you experience signal drops or unwanted noise, change the operating channel:

1. Press the "Channel" button on both the transmitter and receiver units simultaneously.
2. The channel indicator lights will change, cycling through channels 1-4.
3. Select the same channel on both units. The units will automatically re-pair on the new channel.
4. Test the connection. If interference persists, try another channel.

It is recommended to select a channel that is not heavily used by other 2.4GHz devices (e.g., Wi-Fi routers) in your immediate vicinity.

4.2-сүрөт: The Xvive U2 system allows for wireless instrument use, demonstrating its effective range in an open environment.

5. Батареяны заряддоо

The Xvive U2 units are equipped with built-in rechargeable lithium-ion batteries. A full charge provides up to 5 hours of continuous operation.

5.1 Заряддоо процедурасы

1. Turn off both the transmitter and receiver units.
2. Connect the included USB charging cable to the micro-USB port on each unit.
3. Connect the other end of the USB cable to a standard USB power source (e.g., computer USB port, USB wall adapter, power bank).
4. The charging indicator light will be red during charging. It will turn off when the battery is fully charged.

Эскертүү: Avoid using fast chargers or chargers with voltage exceeding 5V to prevent damage to the battery.

6. Техникалык тейлөө жана кам көрүү

• Тазалоо: Түзмөктөрдү тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: Түзмөктөрдү салкын, кургак жерде, күндүн нуру түз тийбеген жана өтө жогорку температурадан алыс сактаңыз.
• Батареяга кам көрүү: To prolong battery life, avoid fully discharging the units frequently. If storing for extended periods, charge the batteries to approximately 50% every few months.
• Колдонуу: Түзмөктөрдү этияттык менен кармаңыз. Аларды түшүрүп албоодон же катуу соккуга кабылбоодон алыс болуңуз.
• Нымдуулук: Keep the units away from water and high humidity.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the official Xvive webсайтка кайрылыңыз же жергиликтүү дистрибьютериңиз менен байланышыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Өндүрүүчү: Xvive Audio

Webсайт: www.xviveaudio.com