UltraPro Z-Wave Plus Smart Light Switch (Model 54890) User Manual

1. Киришүү

Thank you for choosing the UltraPro Z-Wave Plus Smart Light Switch. This device allows you to remotely control your lighting and create schedules for a wide range of fixtures when connected to a compatible Z-Wave hub. It features QuickFit and SimpleWire technologies for easier installation and enhanced reliability. This manual provides detailed instructions for installation, operation, and troubleshooting.

2. Коопсуздук маалыматы

• ЭЛЕКТР ТОКУКТУНУН ЧЫГУУ КОРКУНУЧТУ: Electricity can cause personal injury and property damage if handled improperly. All wiring must be performed by a qualified electrician or knowledgeable person.
• КУЧТУ АЖЫРАТУУ: Always turn OFF the power to the circuit breaker or fuse box before installing or servicing this device.
• НЕЙТРАЛ ЗЫМ ТАЛАП КЫЛЫНАТ: This smart switch requires a neutral wire for proper operation. If your switch box does not have a neutral wire, consult a qualified electrician.
• ИЧКИ ОРДОНДО ГАНА КОЛДОНУУ: Бул аппарат имараттын ичинде гана колдонууга арналган.
• ЫНТЫМАК: жалпы ват камсыз кылууtage of the connected load does not exceed the switch's maximum rating (120 watts).

3. Пакеттин мазмуну

• 2 x UltraPro Z-Wave Plus Smart Light Switches
• User Manual

4. Өзгөчөлүктөрү

• QuickFit Design: Reduced housing depth (up to 20% less than previous Z-Wave models) and elimination of heat tabs make installation easier in older or crowded switch boxes.
• SimpleWire Technology: Auto-detecting line/load terminals simplify wiring by automatically identifying line and load wires. Dual offset ground ports support daisy-chaining.
• Z-Wave Plus тастыкталган: Ensures compatibility with all Z-Wave certified hubs and devices.
• Integrated Repeater: Extends the range of your Z-Wave network.
• Үн менен башкаруу: Compatible with Google Assistant and Amazon Alexa when connected to a compatible Z-Wave hub.
• Алыстан башкаруу жана пландаштыруу: Remotely turn lights on/off and create custom schedules via your Z-Wave hub.
• Ар тараптуу шайкештик: Works with all LED, CFL, incandescent, and halogen bulbs, as well as other devices.

This smart switch is compatible with various bulb types, including LED, CFL, incandescent, and halogen.

5. Орнотуу жана орнотуу

5.1 Алдын ала орнотуу текшерүү тизмеси

• Verify that your switch box has a neutral wire (usually white).
• Ensure the power to the switch location is OFF at the circuit breaker.
• Confirm you have basic wiring tools (screwdriver, wire strippers).

5.2 Электр зымдары боюнча нускамалар

The UltraPro Smart Switch features SimpleWire technology for simplified wiring. The auto-detecting line/load terminals will identify the correct wires. Dual ground ports are offset to prevent interference with mounting screws.

1. Электрди өчүрүү: At the circuit breaker, turn off the power to the switch box you are working on.
2. Эски которгучту алып салуу: Carefully remove the existing switch from the wall box. Disconnect the wires, noting their original connections.
3. Зымдарды туташтыруу: Connect the wires from your wall box to the UltraPro Smart Switch terminals as follows:
• Жер зымы: Connect the bare copper or green wire from the wall box to the GROUND terminal.
• Нейтралдуу зым: Connect the white neutral wire from the wall box to the NEUTRAL terminal.
• Линия/жүктөө зымдары: Connect the black line and load wires to the LINE/LOAD terminals. The SimpleWire technology will automatically detect which is which.
• Саякатчы зымы (3 тараптуу орнотуулар үчүн): If installing in a 3-way configuration, connect the traveler wire to the TRAVELER terminal. (Requires an UltraPro add-on switch #39350, sold separately).
4. Коопсуз которуу: Carefully fold the wires and push the switch into the wall box. Secure it with the provided screws.
5. Wallplate орнотуу: Attach the wallplate (sold separately).
6. Күчтү калыбына келтирүү: Turn ON the power at the circuit breaker. The blue LED on the switch should illuminate.

Wiring diagram for the UltraPro Z-Wave Plus Smart Switch, illustrating connections for ground, line/load, traveler, and neutral wires.

The switch supports both single-pole and multi-switch (3-way) configurations. Multi-switch setups require an UltraPro add-on switch (sold separately).

5.3 Өлчөмдөр

Physical dimensions of the UltraPro Smart Switch, including depth, width, and height, shown in both inches and millimeters. Note the SmartStart QR code for easy pairing.

6. Иштөө нускамалары

6.1 Кол менен башкаруу

• Күйгүзүү: Press the top of the paddle switch.
• ӨЧҮРҮҮ: Press the bottom of the paddle switch.

6.2 Z-Wave Integration (Pairing)

To integrate your smart switch into your Z-Wave network, you will need a compatible Z-Wave hub. The switch supports SmartStart for simplified pairing.

1. Жупташтыруу режимин иштетүү: Put your Z-Wave hub into inclusion or pairing mode. Refer to your hub's instruction manual for specific steps.
2. SmartStart (Recommended): If your hub supports SmartStart, scan the QR code located on the switch or its packaging. The switch will automatically pair with your hub. The Device Specific Key (DSK) is also printed near the QR code for manual entry if needed.
3. Кол менен киргизүү: If SmartStart is not available, initiate manual inclusion on your Z-Wave hub. Then, quickly press the top or bottom paddle of the UltraPro switch once. The LED indicator will flash to confirm inclusion.
4. Ырастоо: Your Z-Wave hub should confirm successful pairing. You can now control the switch through your hub's interface.

6.3 Үн менен башкаруу

Once successfully paired with a Z-Wave hub that supports Amazon Alexa or Google Assistant integration, you can use voice commands to control your lights.

1. Connect Hub to Voice Assistant: Follow your Z-Wave hub's instructions to link it with your Amazon Alexa or Google Assistant account.
2. Түзмөктөрдү табуу: Use the voice assistant app to discover new devices. Your UltraPro Smart Switch should appear.
3. Үн буйруктары: Эми сиз төмөнкү буйруктарды колдоно аласыз:
• – Alexa, бөлмөнүн жарыгын күйгүз.
• "Эй, Google, ашкананын жарыгын өчүр."

Control your UltraPro Smart Switch using voice commands with Amazon Alexa or Google Assistant, requiring a compatible Z-Wave hub.

6.4 Remote Control and Custom Scenes

Through your Z-Wave hub's application, you can control your lights from anywhere and create custom scenes.

• Каалаган жерден башкаруу: Use your smartphone, tablet, or PC to turn lights on or off, or adjust schedules, even when you're away from home.
• Ыңгайлаштырылган көрүнүштөр: Program groups of hardwired fixtures for specific events, times, or moods. For example, a "Movie Night" scene could dim the lights, or a "Good Morning" scene could gradually brighten them.

Control your lighting from any smart device, including smartphones, tablets, or PCs, from any location.

Create custom scenes to program groups of hardwired fixtures for entertaining, events, or specific times.

7. Техникалык тейлөө

The UltraPro Smart Light Switch requires minimal maintenance. To clean, gently wipe the surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. There are no user-serviceable parts inside the switch.

8. Кыйынчылыктарды

• Жарык күйбөйт/өчпөйт:
  • Автоматтык өчүргүчтө кубаттуулук калыбына келтирилгенин текшериңиз.
  • Check wiring connections to ensure they are secure and correct (Line, Load, Neutral, Ground).
  • Verify the bulb is working and properly installed.
• Switch does not pair with Z-Wave hub:
  • Z-Wave хабыңыз кошуу/жупташтыруу режиминде экенин текшериңиз.
  • Try moving the hub closer to the switch during pairing.
  • Reset the switch: With the switch LED glowing, quickly press the top paddle three times, then the bottom paddle three times. The LED will flash to confirm reset. Then attempt pairing again.
  • If using SmartStart, ensure the QR code is scanned correctly.
• Пульт иштебей жатат:
  • Confirm the switch is successfully paired with your Z-Wave hub.
  • Check your Z-Wave network's health and signal strength. The switch acts as a repeater, but obstacles can still affect communication.
  • Ensure your Z-Wave hub has internet connectivity if controlling remotely.

9. Техникалык шарттар

10. Кепилдик

UltraPro products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the manufacturer's official webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

11. Колдоо

If you encounter any issues or have questions regarding the UltraPro Z-Wave Plus Smart Light Switch, please refer to the troubleshooting section of this manual or contact UltraPro customer support. Contact information can typically be found on the product packaging or the manufacturer's webсайт.