MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System. This system features a 5 GHz 1/2U dual-channel digital receiver and two ISM 5 GHz digital handheld wireless microphones, designed for reliable and high-quality audio transmission.

Кутуда эмне бар

Таңгактан чыгаргандан кийин, төмөнкү компоненттердин бардыгы камтылганын текшериңиз:

• 1 x ACT-5802 Dual-Channel Digital Receiver
• 2 x ACT-58H2 Handheld Digital Wireless Microphones
• 1 x Кабыл алгыч үчүн кубат адаптери
• 2 х Антенналар
• 1 x Аудио кабели
• 1 x User Manual

Note: If any items are missing or damaged, please contact your dealer immediately.

Продукт бүттүview

The MIPRO ACT-5802/ACT-58H2 system provides a robust wireless audio solution. Below is an image of the complete system.

1-сүрөт: MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System. This image displays the ACT-5802 dual-channel receiver unit and two ACT-58H2 handheld microphones, illustrating the primary components of the wireless audio system.

Орнотуу нускамалары

1. Receiver Setup (ACT-5802)

1. Жайгашкан жери: Position the receiver on a stable, flat surface, away from potential sources of interference such as Wi-Fi routers, microwave ovens, or other 5 GHz devices. Ensure adequate ventilation.
2. Антенна туташуу: Connect the two supplied antennas to the ANTENNA A and ANTENNA B connectors on the rear panel of the receiver. Ensure they are securely tightened.
3. Кубат туташуу: Connect the power adapter to the DC IN jack on the rear panel of the receiver, then plug the adapter into an appropriate AC power outlet.
4. Аудио чыгаруу байланышы: Кабыл алгычтын аудио чыгышын (XLR же 1/4" уяча) миксердин киришине туташтырыңыз, amplifier, or audio recording device using the supplied audio cable.

2. Handheld Microphone Setup (ACT-58H2)

1. Батарея орнотуу: Unscrew the lower part of the microphone body to reveal the battery compartment. Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the compartment. Screw the lower part back on securely.
2. Күйгүзүү: Press and hold the power button on the microphone until the display illuminates.
3. Pairing (ACT Sync):
   • On the receiver, select the desired channel (e.g., Channel 1 or Channel 2) using the control buttons.
   • Press the "ACT" button on the receiver. The ACT indicator will flash.
   • Align the microphone's IR window with the receiver's IR window (usually located on the front panel) within 30 cm (1 foot).
   • The microphone will automatically sync with the receiver. Once synced, the receiver's ACT indicator will stop flashing, and the microphone's display will show the matched channel.

Иштөө нускамалары

1. Күйгүзүү / Өчүрүү

• Алуучу: Press the power button on the front panel. The OLED display will illuminate.
• Микрофон: Press and hold the power button until the display illuminates (on) or turns off (off).

2. Channel Selection and Adjustment

• The ACT-5802 receiver allows for automatic frequency scanning to find clear channels. Refer to the receiver's display and menu buttons for navigation.
• Once a clear channel is selected on the receiver, use the ACT Sync function (as described in Setup) to pair the microphone to the new channel.

3. Үндү башкаруу

• Кабылдагычтын чыгаруу деңгээли: Adjust the volume knob on the front panel of the ACT-5802 receiver to control the audio output level sent to your mixer or ampөмүрлүү.
• Микрофондун кирешеси: Some microphones may have internal gain adjustments. Consult the microphone's specific instructions if needed. Generally, start with a moderate gain setting.

4. Маалыматты көрсөтүү

The OLED display on both the receiver and microphones provides critical information such as channel number, frequency, battery status, and RF/AF signal strength. Monitor these displays during operation for optimal performance.

Техникалык тейлөө

1. Тазалоо

• Use a soft, dry cloth to clean the exterior surfaces of the receiver and microphones.
• Суюк тазалагычтарды, эриткичтерди же абразивдик материалдарды колдонбоңуз, анткени алар финишке же ички тетиктерге зыян келтириши мүмкүн.
• For microphone grilles, gently wipe with a slightly damp чүпүрөк жана аны колдонуудан мурун толугу менен кургак болушун камсыз кылуу.

2. Батареяга кам көрүү

• Always remove batteries from the microphones if they will not be used for an extended period to prevent leakage and damage.
• Replace batteries promptly when the low battery indicator appears on the microphone's display.
• Жогорку сапаттагы щелочтуу же кайра заряддалуучу AA батарейкаларын колдонуңуз.

3. Сактоо

• Системаны салкын, кургак жерде, күндүн түз нурунан, өтө жогорку температурадан жана жогорку нымдуулуктан алыс сактаңыз.
• Keep the original packaging for safe transport and storage.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, өнүмүңүз менен кошо берилген кепилдик картасын караңыз же расмий MIPRO веб-сайтына кириңиз webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

For further assistance, contact your authorized MIPRO dealer or distributor.