CallToU CC01-DS04

CallToU Wireless Door/Window Sensor Chime

Model: CC01-DS04

Instruction Manual

1. Introduction and Overview

The CallToU Wireless Door/Window Sensor Chime (Model CC01-DS04) is a versatile security and alert system designed to notify you when a door or window is opened. It consists of a receiver unit and a magnetic sensor. When the magnetic sensor detects an opening, it wirelessly transmits a signal to the receiver, which then sounds an alarm or chime.

This system is suitable for various applications, including:

  • Үй коопсуздугу: Detects unauthorized entry through doors or windows.
  • Балдардын коопсуздугу: Alerts you if children open restricted doors or windows.
  • Үй жаныбарларын көзөмөлдөө: Notifies you if pets open doors or gates.
  • Customer Alert: Functions as a welcome chime for retail stores or offices.
CallToU Wireless Door/Window Sensor Chime components: receiver and magnetic sensor.

Figure 1: CallToU Wireless Door/Window Sensor Chime system overview.

2. Пакеттин мазмуну

Сураныч, бардык буюмдар бар экенин текшерүү үчүн пакетти текшериңиз:

  • 1 х кабыл алуучу бирдиги
  • 1 x Magnetic Sensor (Transmitter)
  • 1 x Instruction Manual
  • Mounting Accessories (Double-sided tape, screws)
  • 1 x 12V 23A Alkaline Battery (pre-installed in transmitter)

3. Продукциянын өзгөчөлүктөрү

  • Жөнгө салынуучу Көлөмү: 5 levels of volume adjustment, ranging from 0dB (silent) to 110dB.
  • Бир нече обондор: 55 selectable chime melodies.
  • LED көрсөткүчү: Visual alert with LED flashing.
  • Кеңейтилген диапазон: Up to 200 meters (650 feet) in open areas, and up to 80 meters (260 feet) indoors.
  • Батареянын узак иштөө мөөнөтү: Magnetic sensor battery lasts for approximately 13,000 triggers (about 8 months with 50 uses per day).
  • Оңой орнотуу: Wireless design with no complex wiring required.
  • Кеңейтүүчү система: One receiver can pair with up to 30 transmitter sensors.
Receiver unit showing volume and melody selection buttons, and LED indicator.

Figure 2: Receiver features including 55 melodies and 5 volume levels.

4. Орнотуу нускамалары

4.1 Компоненттер бүттүview

Diagram showing the receiver with plug, speaker, volume/navigation buttons, and the door/window magnetic sensor.

3-сүрөт: Детальдуу view of receiver and magnetic sensor components.

4.2 Баштапкы орнотуу жана жупташтыруу

  1. Power On the Receiver: Plug the receiver unit into a standard electrical outlet. The receiver will power on and be ready for pairing.
    2. Image showing the receiver being plugged into an electrical outlet.

    Figure 4: Plug the receiver into an outlet.

  2. Обон тандаңыз: Press the 'Up' or 'Down' buttons on the side of the receiver to cycle through the 55 available melodies. Select your preferred chime sound.
    3. Image showing a hand pressing the melody selection button on the receiver.

    Figure 5: Select your desired melody.

  3. Жупташтыруу режимине кирүү: Press and hold the volume button on the side of the receiver for approximately 5 seconds until you hear a "ding-dong" sound and the blue LED light flashes. This indicates the receiver is in pairing mode.
    4. Image showing a hand pressing the volume button to enter pairing mode.

    Figure 6: Enter pairing mode by holding the volume button.

  4. Activate Magnetic Sensor: Separate the two parts of the magnetic sensor by more than 1.5 cm (0.6 inches). The receiver will emit the selected chime sound and its LED will flash, indicating successful pairing.

    5. Video 1: Demonstrates the door sensor setup method, including powering on, selecting a melody, entering pairing mode, and activating the magnetic sensor for successful pairing.

  5. Сенсорду орнотуу: Use the provided double-sided tape or screws to attach the magnetic sensor to your desired door or window frame. Ensure the two parts of the sensor are aligned and within 1.5 cm (0.6 inches) of each other when the door/window is closed.
    6. Diagram showing the two parts of the magnetic sensor installed on a door frame, with a red line indicating the separation that triggers the signal.

    Figure 7: Proper installation of the magnetic sensor on a door or window.

    Step-by-step visual guide for installing the magnetic sensor and pairing it with the receiver.

    Figure 8: Visual guide for the setup and pairing process.

5. Иштөө нускамалары

  1. Triggering the Alarm: When the magnetic sensor's two parts separate (e.g., a door or window opens), the sensor will send a signal to the paired receiver.
  2. Receiver Alert: The receiver will sound the selected melody and its LED light will flash, alerting you to the opening.
  3. Үндү тууралоо: Press the volume button on the receiver to adjust the sound level through 5 different settings.
  4. Мелодия тандоо: Use the 'Up' and 'Down' buttons on the receiver to change the chime melody.
Illustrations of various use cases for the door sensor: child safety, pet escape prevention, family entry notification, and customer arrival alert in a shop.

9-сүрөт: Мисamples of how the door sensor chime can be used in different scenarios.

6. Техникалык тейлөө

6.1 Battery Replacement (Magnetic Sensor)

The magnetic sensor is powered by a 12V 23A alkaline battery. When the battery is low, the sensor's indicator light may flash or the transmission range may decrease. Replace the battery as follows:

  1. Carefully pry open the magnetic sensor casing using a small screwdriver.
  2. Эски 12V 23A батареясын алып салыңыз.
  3. Insert a new 12V 23A alkaline battery, ensuring correct polarity.
  4. Сенсорду жабуу casing коопсуз.

Video 2: Detailed instructions on how to replace the battery in the door sensor.

Diagram showing the steps to replace the 12V 23A battery in the magnetic sensor.

Figure 10: Visual guide for magnetic sensor battery replacement.

6.2 Тазалоо

Агрегаттарды жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.

7. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Receiver does not chime when sensor is triggered.1. Sensor and receiver are not paired.
2. Sensor battery is low or dead.
3. Sensor and receiver are out of range.
4. Obstructions between sensor and receiver.		1. Re-pair the sensor and receiver (refer to Section 4.2).
2. Replace the sensor battery (refer to Section 6.1).
3. Move the receiver closer to the sensor.
4. Reduce obstructions or reposition units.
Chime sound is too low or too loud.Үндүн жөндөөсү туура эмес.Үндү кабыл алгычтагы үн баскычын колдонуп тууралаңыз.
Жалган сигналдар.Magnetic sensor parts are too far apart or misaligned.Ensure the magnetic sensor parts are within 1.5 cm (0.6 inches) when the door/window is closed and are properly aligned.

8. Техникалык шарттар

  • Бренд: CallToU
  • Модел: CC01-DS04
  • Түсү: Кара
  • Кабылдагычтын өлчөмдөрү: 8.17 x 8.17 x 3 см (болжол менен 3.22 x 3.22 x 1.18 дюйм)
  • Magnetic Sensor Dimensions: 9.5 x 9 x 9 cm (overall product dimension, specific sensor dimensions not provided but implied to be smaller)
  • Кубат булагы: Receiver: AC Plug-in; Transmitter: 1 x 12V 23A Alkaline Battery (included)
  • Зымсыз диапазон: Up to 200 meters (650 feet) outdoors (line of sight), up to 80 meters (260 feet) indoors
  • Үн деңгээли: 5 (0-110дБ)
  • Обондор: 55 тандоо
  • Сенсор технологиясы: Contact Sensor (Magnetic)
  • UPC: 779584902443
Diagram showing the dimensions of the receiver and magnetic sensor in inches.

Сүрөт 11: Продукциянын өлчөмдөрү.

9. Кепилдик жана колдоо

This CallToU product comes with a 1 жылдык сапат кепилдиги. If you encounter any issues or have questions regarding the product during use, please contact CallToU customer support through Amazon's order details page. We are committed to providing prompt assistance and replacements if necessary.

For further assistance, please refer to the contact information provided with your purchase or visit the official CallToU brand store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.