DEKO 400W-Bleu (DEKO ESP-400BL-EU)

DEKO 400W Submersible Pump User Manual

Model: 400W-Bleu (DEKO ESP-400BL-EU)

1. Киришүү

Thank you for choosing the DEKO 400W Submersible Pump. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your pump. Please read this manual thoroughly before use and keep it for future reference.

DEKO 400W Submersible Pump

Figure 1: DEKO 400W Submersible Pump. This image shows the overall design of the pump, featuring its blue and white casing, integrated handle, float switch, and outlet connection.

2. Коопсуздук нускамалары

Жараат алуу же зыян келтирүү коркунучун азайтуу үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:

  • Электр коопсуздугу: Ensure the power supply matches the pump's specifications (240V). Always connect to a grounded outlet. Do not operate with damaged cables or plugs.
  • Суу коопсуздугу: Never operate the pump out of water. Do not use the pump for flammable, explosive, or corrosive liquids.
  • Жеке коопсуздук: Keep hands, feet, and clothing away from moving parts. Disconnect power before performing any maintenance or cleaning.
  • Балдар жана үй жаныбарлары: Балдарды жана үй жаныбарларын операциядан алыс кармаңыз.
  • Температура: Do not pump liquids above 35°C (95°F).

3. Продукциянын компоненттери

Familiarize yourself with the main parts of your DEKO Submersible Pump:

DEKO Submersible Pump Components Diagram

Figure 2: Key components of the DEKO Submersible Pump. This diagram labels the cable, pump handle, output tie-in, float switch, and water suction port.

  • Насос туткасы: For easy carrying and lowering the pump into water.
  • Float Switch: Automatically starts and stops the pump based on water level.
  • Output Tie-in: Connection point for the discharge hose.
  • Water Suction Port: Located at the base, where water enters the pump.
  • Кубат кабели: Насосту электр булагына туташтырат.

4. Орнотуу жана орнотуу

4.1 Шланг туташтыруу

The pump supports multiple hose sizes: 1 inch, 1-1/4 inch, G1 inch, and G1-1/2 inch. Choose the appropriate adapter for your hose.

  1. Attach the desired hose adapter to the output tie-in.
  2. Secure the discharge hose to the adapter using a hose clamp or by threading it if applicable.

4.2 Орнотуу

Place the pump on a stable, flat surface in the water. Ensure the float switch can move freely and is not obstructed by obstacles.

DEKO Submersible Pump in water

Figure 3: The DEKO Submersible Pump operating in a body of water. This image demonstrates the pump's intended use, showing it partially submerged with the float switch and discharge hose visible.

5. Иштөө нускамалары

5.1 Automatic Operation (Float Switch)

The pump is equipped with an automatic float switch for hands-free operation.

  • When the water level rises and lifts the float switch to approximately 50 cm, the pump will automatically start.
  • When the water level drops and the float switch falls to approximately 25 cm, the pump will automatically stop to prevent dry running.
DEKO Submersible Pump Float Switch Operation

Figure 4: Diagram illustrating the float switch's working and stop states. The pump starts when the float switch is lifted (water level at or above 50cm) and stops when it drops (water level at or below 25cm).

5.2 Кол менен иштетүү

If the water level is too low for the float switch to operate automatically, you can operate the pump manually.

  • To operate manually, ensure the float switch is secured in an "ON" position (e.g., by tying it up).
  • Plug in the pump to start. Unplug to stop.
  • In manual mode, the pump can reduce the water level down to 35 mm. Monitor the pump to prevent dry running.

5.3 Pumping Dirty Water

This pump is designed to handle dirty water with solid particles up to 35 mm in diameter.

DEKO Submersible Pump handling dirty water

Figure 5: The DEKO Submersible Pump is capable of pumping dirty water with solids up to 35mm. This image highlights the pump's ability to manage water containing debris.

6. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө насостун оптималдуу иштешин камсыз кылат жана анын иштөө мөөнөтүн узартат.

  • Тазалоо: After each use, especially when pumping dirty water, rinse the pump with clean water to remove debris.
  • Текшерүү: Periodically inspect the power cable, plug, and float switch for any signs of damage. Check the water suction port for blockages.
  • Сактагыч: Store the pump in a dry, frost-free location when not in use for extended periods.

7. Кыйынчылыктарды

КөйгөйМүмкүн себепЧечим
Насос иштебейт.No power supply; Float switch not activated; Motor overheated.Check power connection; Ensure float switch is free to move and water level is sufficient; Allow pump to cool down.
Насос иштеп жатат, бирок суу агып чыкпайт же агым аз.Hose kinked or blocked; Suction port blocked; Air trapped in pump.Check and clear hose; Clean suction port; Tilt pump slightly to release air.
Насос күтүлбөгөн жерден токтойт.Float switch dropped (automatic mode); Overheat protection activated.Check water level; Allow pump to cool down.

8. Техникалык шарттар

СпецификацияНарк
Модел400W-Bleu (DEKO ESP-400BL-EU)
Энергияны керектөө400 Вт
Электр камсыздоо240 Вольт, 50 Гц
Макс. Flow Rate8000 L/H
Насостун максималдуу бийиктиги (басымы)5 м
Макс. Сууга түшүү тереңдиги7 м
Макс. Бөлүкчөлөрдүн өлчөмү35 мм
Коргоо түрүIPX8
Салмагы3.7 кг
Өлчөмдөрү (L x W x Y)17 x 15.8 x 33 см
Макс. Суунун температурасы35 °C
Минималдуу иштөө тереңдиги115 мм
Lowest Water Level After Suction35 мм
DEKO Submersible Pump Technical Diagram

Figure 6: Technical diagram showing the dimensions and some key specifications of the DEKO Submersible Pump.

9. Кепилдик жана колдоо

For warranty information and customer support, please refer to the documentation provided with your purchase or contact DEKO customer service. Keep your proof of purchase for warranty claims.

Өндүрүүчү: DEKO

For further assistance, visit the official DEKO webсайтка же алардын колдоо каналдарына кайрылыңыз.

© 2024 DEKO. Бардык укуктар корголгон.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.