ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight User Manual

1. Киришүү

Thank you for choosing the ONE Light 10105TR/W Trimless GU10 50W Recessed Spotlight. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference. This product complies with EN60598-1 and other specific standards.

2. Коопсуздук нускамалары

• Орнотуудан, техникалык тейлөөдөн же лампочканы алмаштыруудан мурун ар дайым негизги өчүргүчтөгү кубат менен камсыздоону өчүрүңүз.
• Орнотуу бардык жергиликтүү электр эрежелерине жана эрежелерине ылайык квалификациялуу электрик тарабынан жүргүзүлүшү керек.
• Бул продукт үчүн иштелип чыккан үй ичинде гана колдонуу. Do not install in wet or damp жерлер.
• Ensure the ceiling material can support the weight of the fixture.
• Максималдуу ваттан ашпаңызtage of 50W for the GU10 bulb.
• Avoid touching the bulb directly with bare hands, as oils can reduce bulb life.
• Күйүүчү материалдарды жарыктан алыс кармаңыз.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 1x Recessed Spotlight Housing (White Aluminum)
• Монтаждоочу жабдык
• Электр кабели
• Жабыштыргыч

Image 1: Components of the ONE Light Trimless Recessed Spotlight, showing the mounting bracket and the light housing.

4. Орнотуу жана орнотуу

This trimless recessed spotlight requires careful installation to achieve a seamless finish. Professional installation is recommended.

4.1 Dimensions and Preparation

Before cutting, ensure the chosen location avoids joists, pipes, or electrical wires. Refer to the dimensional diagram for precise cutout requirements.

Image 2: Dimensional diagram of the ONE Light Trimless Recessed Spotlight, indicating a 60mm diameter and 40mm height.

4.2 Орнотуу кадамдары

1. Кубатты өчүрүү: Орнотуу аймагына негизги электр менен камсыздоо автоматтык өчүргүчтөн өчүрүлгөнүн текшериңиз.
2. Prepare Ceiling Opening: Using the provided dimensions (60mm diameter), cut a precise hole in the ceiling. For trimless installation, additional plastering work around the fixture may be required after mounting the housing.
3. Зым байланыштары: Connect the electrical cord from the spotlight housing to your main electrical wiring. Ensure all connections are secure and insulated according to local electrical codes.
4. Тоодогу турак-жай: Insert the spotlight housing into the ceiling opening. Use the provided mounting hardware to secure the housing firmly in place. For a trimless finish, the housing should be flush with the ceiling surface, ready for plastering.
5. GU10 лампасын орнотуу: Once the housing is securely installed and any finishing work is complete, insert a GU10 bulb (max 50W) into the lamp holder. Twist to lock it in place.
6. Жыйынтыктоочу жыйын: Insert the inner light component into the outer housing.
7. Күчтү калыбына келтирүү: Орнотуу аяктагандан жана бардык туташуулар коопсуз болгондон кийин, өчүргүчтөгү кубатту калыбына келтириңиз.

5. Иштөө нускамалары

The ONE Light 10105TR/W spotlight operates via a standard wall switch connected to its electrical circuit. This fixture is күңүрттүү эмес.

5.1 Лампаны алмаштыруу

To replace the GU10 bulb:

1. Кубатты өчүрүү: Always disconnect power at the circuit breaker before replacing the bulb.
2. Муздатуу үчүн: Let the old bulb cool down completely before touching it.
3. Remove Bulb: Gently push the bulb upwards and twist it counter-clockwise to release it from the GU10 base.
4. Жаңы лампочканы салыңыз: Align the pins of the new GU10 bulb with the slots in the lamp holder. Push upwards and twist clockwise to secure it. Ensure the new bulb is a GU10 type and does not exceed 50W.
5. Күчтү калыбына келтирүү: Автоматтык өчүргүчтөгү кубаттуулукту калыбына келтириңиз.

6. Техникалык тейлөө

The ONE Light 10105TR/W spotlight requires minimal maintenance.

• Тазалоо: Ensure the power is off and the fixture is cool. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Колдонуучу тейлей турган бөлүктөр жок: Other than bulb replacement, there are no user-serviceable parts inside the fixture. Do not attempt to disassemble the unit.

7. Кыйынчылыктарды

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Жарык күйбөйт:
  • Check if the power supply to the fixture is on at the circuit breaker and wall switch.
  • Ensure the GU10 bulb is correctly installed and not faulty. Try replacing it with a known working bulb.
  • Verify electrical connections are secure (consult a qualified electrician if unsure).
• Жарык жыпылыктары:
  • Ensure the GU10 bulb is fully seated and twisted into the base.
  • The bulb may be faulty or nearing the end of its life. Replace the bulb.
  • Check for loose wiring connections (consult a qualified electrician).

8. Техникалык шарттар

Image 3: EU Energy Label for the luminaire, indicating compatibility with bulbs of various energy classes from A++ to E.

9. Кепилдик жана колдоо

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or inquiries, please reach out to your seller or the ONE Light customer service department.