Eibach Pro-Spacer Wheel Spacer Instruction Manual

Introduction

The Eibach Pro-Spacer is designed to enhance vehicle aesthetics and handling by increasing track width. This product, when installed, positions the wheels further out, filling the wheel arches for a wider stance and improved stability. It is manufactured from high-tensile strength aluminum alloy, ensuring precise fitment and exceptional wheel balance.

This manual provides essential information for the correct installation, operation, and maintenance of your Eibach Pro-Spacer. Please read all instructions carefully before proceeding with installation or use.

Коопсуздук маалыматы

WARNING: Improper installation or use of wheel spacers can lead to serious injury or vehicle damage. Always follow manufacturer's instructions and consult a qualified mechanic if unsure.

• Ensure all components are clean and free from debris before installation.
• Use appropriate tools and torque specifications.
• Regularly inspect wheel spacers and lug nuts for tightness and wear.
• Do not exceed the recommended torque values.
• Ensure sufficient thread engagement for lug nuts after spacer installation.

Кутуда эмне бар

Your Eibach Pro-Spacer package should contain the following items:

• Pro-Spacer(s)
• Appropriate lug nuts/bolts (if included with your specific kit)
• Колдонмо (бул документ)

Image 1: Contents of the Eibach Pro-Spacer kit, including the spacers, lug nuts, and packaging.

Орнотуу жана орнотуу

This section outlines the general steps for installing Eibach Pro-Spacers. Specific vehicle requirements may vary. Always refer to your vehicle's service manual for wheel and lug nut torque specifications.

1. Унааны даярдоо: Park the vehicle on a level, stable surface. Engage the parking brake. Loosen the lug nuts on the wheel(s) to be fitted with spacers.
2. Көтөрүү жана коопсуз: Safely lift the vehicle using a jack and support it with jack stands. Remove the lug nuts and then the wheel.
3. Таза монтаждоо беттери: Thoroughly clean the vehicle's hub mounting surface and the back of the wheel spacer. Ensure there is no rust, dirt, or debris that could prevent flush contact.
4. Install Spacer: Place the Eibach Pro-Spacer onto the vehicle's hub. Ensure it sits flush against the hub.
5. Secure Spacer (if applicable): If your spacer system requires it, use the provided hardware to secure the spacer to the vehicle's hub. Torque these bolts to the manufacturer's specifications.
6. Mount Wheel: Place the wheel onto the installed spacer. Ensure the wheel sits flush against the spacer.
7. Install Lug Nuts/Bolts: Install the new, longer lug nuts/bolts (if provided or required) or the original lug nuts/bolts (if using a hub-centric spacer that uses existing studs). Hand-tighten them.
8. Төмөнкү унаа: Carefully lower the vehicle until the wheel just touches the ground, but the full weight is not yet on the wheel.
9. Torque Lug Nuts/Bolts: Using a torque wrench, tighten the lug nuts/bolts in a star pattern to the vehicle manufacturer's specified torque. Do not overtighten.
10. Акыркы төмөндөтүү: Fully lower the vehicle and remove the jack and jack stands.
11. Кайталоо: Repeat the process for all wheels where spacers are to be installed.

Сүрөт 2: Детальдуу view of the Eibach Pro-Spacer and accompanying lug nuts, highlighting the product's design.

Operation and Driving Considerations

Once installed, Eibach Pro-Spacers are designed to integrate seamlessly with your vehicle's wheel system. While they improve handling and appearance, it's important to be aware of the following:

• Алгачкы текшерүү: After driving the first 50-100 kilometers (30-60 miles), re-check the torque of all lug nuts/bolts. This is crucial as components can settle.
• Handling Changes: Widening the track width can alter the vehicle's handling characteristics. Drive cautiously until you are accustomed to the changes.
• Тазалоо: Ensure there is adequate clearance between the tire/wheel and fender, suspension components, and brake lines, especially during full steering lock and suspension compression.
• Мыйзамга ылайык келүү: Verify that the use of wheel spacers complies with local traffic laws and regulations.

Техникалык тейлөө

Regular inspection and maintenance are vital for the safe and reliable operation of your Eibach Pro-Spacers.

• Мезгилдүү момент текшерүү: Re-check the torque of the lug nuts/bolts at regular service intervals (e.g., every 5,000-10,000 km or 3,000-6,000 miles) or whenever wheels are removed and reinstalled.
• Визуалдык текшерүү: Periodically inspect the spacers for any signs of damage, cracks, corrosion, or deformation. If any damage is observed, replace the spacer immediately.
• Тазалоо: Keep the spacers and mounting surfaces clean to prevent corrosion and ensure proper fitment.

Проблемаларды чечүү

If you encounter issues after installing your Eibach Pro-Spacers, consider the following:

If troubleshooting steps do not resolve the issue, discontinue use and consult a qualified automotive technician.

Техникалык шарттар

• Модел: S90-6-10-032-N-B
• Өндүрүүчү: Эйбах
• Материал: High-tensile strength aluminum alloy
• Элемент Салмагы: 1.28 килограмм
• Продукциянын өлчөмдөрү (L x W x Y): 18.3 x 18.3 x 10 см
• Бөлүмдүн номери: S90-6-10-032-N-B
• ASIN: B08TK2JDXW
• Негизги өзгөчөлүгү: 114,3/5-64-160-1450 black (This appears to be a specific fitment code, likely bolt pattern, center bore, etc.)

Кепилдик маалымат

Eibach products are manufactured to high standards. For specific warranty terms and conditions, please refer to the official Eibach website or contact Eibach customer service directly. Keep your proof of purchase for any warranty claims.

Кардарларды колдоо

For technical assistance, installation questions, or product inquiries, please contact Eibach customer support:

• Webсайт: www.eibach.com (Please check the official Eibach webаймактык байланыш маалыматы үчүн сайт.)
• Электрондук почта/Телефон: чиновникке кайрылыңыз webакыркы байланыш маалыматы үчүн сайт.