HOFTRONIC Esto 2-Light GU10 Black LED Spotlight

1. Киришүү

Thank you for choosing the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight. This product is designed for indoor use, providing adjustable lighting with two GU10 LED bulbs. Constructed from high-quality aluminum, this spotlight offers a modern aesthetic and reliable performance. Please read this manual carefully before installation and use to ensure safe and optimal operation.

Image: The HOFTRONIC Esto 2-Light GU10 Black LED Spotlight installed on a ceiling, providing illumination in a modern interior setting.

2. Коопсуздук нускамалары

• Always disconnect the main power supply before attempting any installation, maintenance, or bulb replacement.
• Installation should be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards.
• This product is rated IP20 and is suitable for үй ичинде гана колдонуу. Do not expose to moisture or direct water.
• Voltage supply matches the product's requirements (230V AC).
• Максималдуу ваттан ашпаңызtage of 35 Watts per GU10 LED bulb.
• Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында жетиштүү желдетүүнү камсыз кылыңыз.
• Do not cover the fixture with insulating material unless specifically designed for it.

3. Кутунун Мазмуну

Орнотууну улантуудан мурун, бардык компоненттердин бар экенин жана бузулбаганын текшериңиз.

Image: Contents of the product box, including the spotlight fixture and mounting hardware.

• 1x HOFTRONIC Esto Double Black LED Ceiling Spot Fixture
• 1x Аллен ачкычы
• 4x бурамалар
• 4x жуугучтар
• 4x дубал сайгычтары

4. Орнотуу жана орнотуу

Follow these steps for safe and correct installation of your LED spotlight.

1. Орнотууга даярданыңыз: Орнотуу аймагына негизги электр менен камсыздоо автоматтык өчүргүчтөн өчүрүлгөнүн текшериңиз.
2. Бургулоо пункттарын белгилөө: Position the fixture on the ceiling at the desired location. Use the mounting holes on the base of the fixture to mark the drilling points. Refer to the diagram below for mounting dimensions.


Image: Detailed diagram of the spotlight's base with mounting hole dimensions (69mm x 69mm spacing, 4mm diameter holes, 13mm edge distance, max 12mm cable inlet).

3. Бургулоо тешиктери: Белгиленген жерлерде тешиктерди бургулаңыз. Берилген дубал тыгындарын бургуланган тешиктерге киргизиңиз.
4. Зымдарды туташтыруу: Open the terminal cover on the fixture. Carefully connect the electrical wires from your ceiling to the terminal block inside the fixture. Ensure correct connections: Live (L), Neutral (N), and Earth (⌀). The cable inlet supports a maximum diameter of 12mm.
5. Арматураны орнотуу: Align the fixture's mounting holes with the wall plugs. Secure the fixture to the ceiling using the provided screws and washers. Do not overtighten.
6. Insert GU10 Bulbs: Insert two GU10 LED bulbs (not included) into the lamp holders. Ensure they are securely twisted into place. Do not exceed 35 Watts per bulb.
7. Күчтү калыбына келтирүү: Once installation is complete and all connections are secure, restore the main power supply.

5. Иштөө нускамалары

The HOFTRONIC Esto spotlight is designed for simple operation.

• Күйгүзүү/өчүрүү: Control the spotlight using your standard wall light switch.
• Жарыктын багытын тууралоо: The GU10 fittings are tiltable, allowing you to adjust the light direction by up to 30 degrees. Gently pivot the inner lamp holders to direct the light as desired.

Image: Illustration of the adjustable light direction, demonstrating the 30-degree tilt capability of the GU10 fittings.

6. Техникалык тейлөө

Regular maintenance will help prolong the life and appearance of your spotlight.

• Тазалоо: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior of the spotlight with a soft, dry, or slightly damp кездеме. Абразивдүү тазалагычтарды, эриткичтерди же катуу химиялык заттарды колдонбоңуз, анткени алар финишке зыян келтириши мүмкүн.
• Лампаны алмаштыруу:
  1. Аппараттын кубаты менен камсыздоону өчүрүңүз.
  2. Эгерде лампа жакында эле колдонулуп келсе, аны толугу менен муздатыңыз.
  3. Gently push the GU10 bulb into its fitting and twist it counter-clockwise to remove.
  4. Insert a new GU10 LED bulb (max 35W) by pushing it into the fitting and twisting clockwise until secure.
  5. Күчтү калыбына келтириңиз.

7. Кыйынчылыктарды

If you encounter issues with your spotlight, refer to the following common problems and solutions:

• Жарык күйбөйт:
  • Негизги кубат менен камсыздоо күйгүзүлгөнүн текшериңиз.
  • Ensure the wall switch is in the 'on' position.
  • Verify that the GU10 bulbs are correctly inserted and not faulty.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Жарык жымыңдайт:
  • Ensure GU10 bulbs are fully seated in their sockets.
  • Try replacing the bulb to rule out a faulty bulb.
  • Зымдардын бош туташууларын текшериңиз (электр өчүрүлгөн учурда).
• Fixture feels hot:
  • Confirm that the installed GU10 bulbs do not exceed the maximum wattage of 35W.
  • Ensure there is no obstruction preventing proper heat dissipation.

If problems persist, contact customer support or a qualified electrician.

8. Техникалык шарттар

Image: Overall dimensions of the HOFTRONIC Esto 2-Light GU10 Black LED Spotlight.

9. Кепилдик

This HOFTRONIC product comes with a 3 жылдык кепилдик, reflecting our commitment to quality and durable construction. The robust aluminum enclosure ensures a long lifespan for your ceiling light.

Image: Warranty information, indicating a 3-year warranty and durable build quality.

10. Колдоо

For further assistance, technical support, or warranty claims, please contact your retailer or the HOFTRONIC customer service department. Refer to your purchase documentation for contact details.