HiQuick 8 Bay Smart Battery Charger Instruction Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation of your HiQuick 8 Bay Smart Battery Charger. Please read this manual thoroughly before use and retain it for future reference.

Пакеттин мазмуну:

• 1 x HiQuick 8 Bay Smart Battery Charger (Model: SW-8N)
• 4 x HiQuick AA 2800mAh Ni-MH Rechargeable Batteries
• 4 x HiQuick AAA 1100mAh Ni-MH Rechargeable Batteries
• 1 x USB Type-C заряддоо кабели
• 1 x User Manual

Жайгашуу

Заряддагычты туташтыруу:

1. Connect the provided USB Type-C charging cable to the input port on the back of the charger.
2. Connect the other end of the USB cable to a compatible 5V 2A USB power source (e.g., a USB wall adapter, computer USB port, or power bank).
3. Ensure the power source is active. The LED indicators on the charger will briefly light up upon connection.

Иштөө нускамалары

Батареяларды салуу:

The charger features 8 independent charging slots, accommodating both AA and AAA Ni-MH/Ni-Cd rechargeable batteries. Each slot can charge batteries individually.

1. Insert the batteries into the charging slots, ensuring the positive (+) and negative (-) poles match the indicators on the charger.
2. The charger can charge 1 to 8 batteries simultaneously.

LED көрсөткүч абалы:

Заряддоо убактысы:

• AAA 1100mAh batteries: Approximately 2 hours for 1-8 batteries.
• AA 2800mAh batteries: Approximately 4.5 hours for 1-8 batteries.

Техникалык тейлөө

Батареяга кам көрүү:

• Store batteries in a cool, dry place away from direct sunlight or high temperatures.
• For long-term storage, it is recommended to charge batteries once every 3 months to maintain optimal performance and prevent damage.
• Avoid mixing old and new batteries, or different types/brands of batteries, when using them in devices.

Заряддоочуга кам көрүү:

• Заряддагычты таза жана чаңдан алыс кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз.
• Do not disassemble or reassemble the charger, as it may cause short-circuit or fire hazard.
• Заряддоочу түзүлүштү сууга же ашыкча нымдуулукка дуушар кылбаңыз.

Проблемаларды чечүү

Жалпы маселелер:

• Batteries not charging (LED not red):
  • USB кабели заряддагычка да, кубат булагына да бекем туташып турганын текшериңиз.
  • Verify the power source is active and providing 5V 2A output.
  • Check if batteries are inserted with correct polarity (+/-).
  • Confirm batteries are Ni-MH/Ni-Cd rechargeable type. Alkaline or non-rechargeable batteries will not charge.
  • Эгерде батареянын томtage is lower than 0.9V, the charger may not activate. Try removing and reinserting the battery.
• Заряддоочу түзүлүш же батарейкалар ысып жатат:
  • This is normal during the charging process, but excessive heat may indicate an issue. Ensure proper ventilation around the charger.
  • Ашыкча ысып кете берсе, колдонууну токтотуп, колдоо бөлүмүнө кайрылыңыз.
• LED remains red after extended charging time:
  • The battery might be defective or has reached its end of life. Try charging another battery to confirm charger functionality.

Техникалык шарттар

Кепилдик жана колдоо

HiQuick products typically come with a 30-day money-back guarantee and a 1-year warranty. For specific warranty details or technical support, please refer to the warranty card included in your package or visit the official HiQuick webсайт.

For customer service inquiries, please contact HiQuick support via their official webсайт же продукт таңгагында көрсөтүлгөн байланыш маалыматы.

Сиз да зыярат кылсаңыз болот HiQuick Store on Amazon көбүрөөк маалымат алуу үчүн.