Hilitand 90mm CPU Air Cooler Instruction Manual

1. Киришүү

Thank you for choosing the Hilitand 90mm CPU Air Cooler. This manual provides essential information for the proper installation, operation, and maintenance of your CPU cooler. Please read these instructions carefully before proceeding with installation to ensure optimal performance and longevity of your product.

2. Коопсуздук маалыматы

• Компоненттерди орнотуудан же алып салуудан мурун ар дайым компьютериңизден электр кубатын ажыратыңыз.
• Handle the CPU cooler and other computer components with care to avoid damage.
• Электростатикалык разряддын (ЭСР) алдын алуу үчүн туура жерге туташтырууну камсыз кылыңыз.
• Балдар жетпеген жерде сактаңыз.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 1 x CPU Cooler (with integrated 90mm fan and heat sink)
• 1 x Backplane (for motherboard mounting)

Image: CPU Cooler and its accompanying back panel.

4. Продукт бүтүп калдыview

The Hilitand 90mm CPU Air Cooler is designed to provide efficient heat dissipation for your CPU. It features a 90mm PWM fan and four direct-contact copper heat pipes, ensuring effective cooling while maintaining a low noise level.

Негизги өзгөчөлүктөрү:

• Натыйжалуу жылуулук диссипациясы: Equipped with 4 heat pipes and a 90mm PWM fan for excellent heat transfer. Features an aluminum alloy heat sink with a large dissipation area.
• Direct Contact Heat Pipes: Utilizes 4-heat copper tubes with direct contact technology for reliable and fast heat dissipation.
• PWM желдеткич: The 9cm cooling fan offers an efficient balance of cooling performance and low noise operation.
• Оңой орнотуу: Includes a back plate for straightforward mounting.
• Кеңири шайкештик: Suitable for LGA 2011, 1366, 1150, 1151, 1155, and 1156 platforms.

Сүрөт: алдыңкы view of the CPU cooler, emphasizing the aluminum alloy heat sink and platform compatibility.

Сүрөт: Жогорку view of the CPU cooler, showing the 9cm fan for strong airflow.

5. Орнотуу

Follow these steps to install the Hilitand CPU Air Cooler:

1. Системаңызды даярдаңыз: Power off your computer and disconnect all cables. Open the computer case to access the motherboard.
2. Remove Existing Cooler (if applicable): Carefully remove any existing CPU cooler. Clean the CPU surface of any old thermal paste using isopropyl alcohol.
3. Арткы панелди орнотуу: Position the provided back panel on the rear side of your motherboard, aligning it with the CPU socket mounting holes.
4. Термикалык пастаны колдонуу: Apply a small amount of thermal paste (not included) to the center of your CPU's integrated heat spreader (IHS).
5. Mount the CPU Cooler: Place the CPU cooler onto the CPU, aligning the mounting screws with the holes on the back panel. Secure the cooler by tightening the screws in a diagonal pattern until snug. Do not overtighten.
6. Желдеткичтин кабелин туташтырыңыз: Connect the 4-pin PWM fan cable from the cooler to the CPU_FAN header on your motherboard.
7. Капты жаап, күйгүзүү: Close your computer case, reconnect all cables, and power on your system. Verify that the fan is spinning.

Image: Visual guide for installing the CPU cooler and back panel.

6. Операция

Once installed, the Hilitand CPU Air Cooler operates automatically. The PWM (Pulse Width Modulation) function allows your motherboard to control the fan speed based on the CPU temperature, providing efficient cooling when needed and quieter operation during lighter loads. Ensure your motherboard's BIOS/UEFI settings are configured to manage the CPU fan appropriately.

7. Техникалык тейлөө

Regular maintenance helps ensure optimal performance and extends the lifespan of your CPU cooler:

• Чаңды тазалоо: Periodically clean the fan blades and heat sink fins to remove accumulated dust. Use compressed air or a soft brush. Ensure the fan is not spinning during cleaning.
• Термикалык паста: Consider reapplying thermal paste every 2-3 years, or if you remove the cooler for any reason, to maintain efficient heat transfer.
• желдеткич текшерүү: Check the fan periodically for any unusual noises or reduced rotation, which may indicate wear or obstruction.

8. Кыйынчылыктарды

If you encounter issues with your CPU cooler, consider the following:

• желдеткич айланбай жатат: Ensure the 4-pin fan cable is securely connected to the CPU_FAN header on the motherboard. Check BIOS/UEFI settings to confirm fan control is enabled.
• Жогорку CPU температурасы: Verify that the cooler is properly seated on the CPU and that thermal paste was applied correctly. Ensure there is adequate airflow within your computer case. Clean any dust from the heat sink and fan.
• Unusual Fan Noise: Check for any cables or obstructions hitting the fan blades. If the noise persists, the fan bearing may be worn.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information or technical support, please refer to the retailer's policy or contact Hilitand customer service through their official channels. Keep your purchase receipt as proof of purchase.