maXpeedingrods Lift Leveling Kit Installation Manual

1. Киришүү

This manual provides detailed instructions for the proper installation, operation, and maintenance of your maXpeedingrods Lift Leveling Kit. This kit is designed to provide a 3-inch front lift and a 2-inch rear lift for Ford Explorer 2WD and 4WD models manufactured between 2002 and 2005. The spacers are constructed from high-strength carbon steel with a powder-coated surface for corrosion resistance, ensuring durability and a comfortable ride while allowing for larger tire fitment (up to 33x12.50).

Please read this manual thoroughly before beginning installation to ensure a safe and correct procedure. Professional installation is recommended.

Image 1.1: Visual comparison of vehicle height before and after installing the lift leveling kit.

2. Коопсуздук эскертүүлөрү

• Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and closed-toe shoes.
• Кандайдыр бир ишти баштаардан мурун, унаа түз жердеги домкраттарга бекем орнотулгандыгын текшериңиз. Эч качан бир гана уячага таянбаңыз.
• Disconnect the vehicle's battery before working on any electrical components.
• Exercise caution when working with springs and suspension components, as they can be under high tension.
• Do not modify any components of the lift kit. Use only the provided hardware.
• After installation, a professional wheel alignment is mandatory to prevent premature tire wear and ensure proper vehicle handling.
• Be aware that lifting a vehicle can alter its center of gravity and handling characteristics. Drive cautiously after installation.
• Some users have reported potential issues with upper control arm (UCA) angles and alignment with lifts of this size. Consider inspecting or upgrading UCAs if alignment issues persist.

3. Пакеттин мазмуну

Please verify that all components are present and undamaged before proceeding with installation. In case of missing or damaged parts, contact maXpeedingrods customer support.

• Алдыңкы тирөөчтөрдүн аралыктары (2)
• Rear Lift Spacers (2)
• High-Grade Mounting Hardware (Bolts and Nuts)

Image 3.1: All components included in the maXpeedingrods Lift Leveling Kit.

Сүрөт 3.2: Детальдуу view of the front and rear strut spacers with accompanying hardware.

4. Керектүү куралдар

• Унаанын домкрат жана домкрат стенддери
• Wheel Chocks
• Metric Socket Set and Wrenches
• Момент ачкычы
• Breaker Bar
• Pry Bar
• Балка/Маллет
• Penetrating Oil
• Anti-Seize Compound
• Өлчөө лентасы

5. Front Installation (3" Lift)

Follow these steps for installing the front strut spacers. Perform these steps on one side of the vehicle at a time.

1. Park the vehicle on a level surface, engage the parking brake, and chock the rear wheels.
2. Loosen the front lug nuts, then raise the front of the vehicle using a jack and support it securely with jack stands. Remove the front wheels.
3. Locate the upper strut mounting nuts under the hood. Do not remove them yet.
4. Disconnect the sway bar end link from the lower control arm.
5. Remove the bolts securing the lower strut mount to the lower control arm.
6. Carefully remove the upper strut mounting nuts. The strut assembly can now be removed from the vehicle.
7. Install the maXpeedingrods front strut spacer on top of the factory strut assembly. Ensure the bolt holes align correctly. The kit is designed for bolt-on installation, meaning a spring compressor is typically not required to disassemble the strut itself.
8. Reinstall the strut assembly with the spacer into the vehicle. Secure the upper strut mount with the new hardware provided in the kit.
9. Reattach the lower strut mount to the lower control arm. It may be necessary to use a pry bar to lower the control arm sufficiently to align the bolt holes.
10. Reconnect the sway bar end link.
11. Tighten all nuts and bolts to factory torque specifications. Refer to your vehicle's service manual for exact values.

Image 5.1: The high-strength carbon steel construction of the spacers, designed for durability.

Image 5.2: High tensile bolts (Grade 8.8) ensure a secure and reliable connection for the lift components.

6. Rear Installation (2" Lift)

Follow these steps for installing the rear lift spacers. Perform these steps on one side of the vehicle at a time.

1. With the front wheels chocked, raise the rear of the vehicle using a jack and support it securely with jack stands under the frame. Allow the rear axle to hang freely. Remove the rear wheels.
2. Locate the lower shock mount bolt and remove it.
3. Carefully lower the rear axle assembly to allow enough space to remove the factory coil spring. Be mindful of brake lines and ABS sensor wires.
4. Install the maXpeedingrods rear lift spacer on top of the factory coil spring perch on the axle.
5. Reinstall the factory coil spring on top of the new spacer.
6. Raise the rear axle assembly to align the lower shock mount. Reinstall the lower shock mount bolt.
7. Tighten all nuts and bolts to factory torque specifications. Refer to your vehicle's service manual for exact values.

7. Post-Installation Procedures

7.1. Акыркы текшерүүлөр

• Double-check all nuts and bolts for proper tightness.
• Ensure all brake lines, ABS wires, and other components are clear of moving suspension parts.
• Дөңгөлөктөрдү кайра орнотуп, унааны түшүрүңүз.

7.2. Дөңгөлөктөрдү тегиздөө

Immediately after installation, it is crucial to have a professional wheel alignment performed. Lifting the vehicle significantly alters suspension geometry, and proper alignment is essential for safe driving, optimal handling, and preventing premature tire wear.

7.3. Test Drive

Perform a short test drive on a safe, low-traffic road. Listen for any unusual noises, check for proper steering response, and ensure the brakes function correctly. If any issues are detected, safely pull over and inspect the installation.

8. Техникалык тейлөө

Regular inspection of your lift kit components is recommended to ensure continued safe operation.

• Periodically check all mounting hardware for tightness, especially after the first 500 miles of driving.
• Inspect the spacers for any signs of corrosion, cracks, or damage.
• Check suspension bushings and ball joints for wear, as lifting can sometimes accelerate wear on these components.
• Keep the suspension components clean, especially after off-road use, to prevent dirt and debris buildup.

9. Кыйынчылыктарды

9.1. Uneven Lift

• Себеби: Incorrect installation, settled components, or pre-existing suspension issues.
• Чечим: Re-verify all measurements and installation steps. Ensure all hardware is torqued correctly. Allow a few days for the suspension to settle. If the issue persists, consult a professional mechanic.

9.2. Noise (Clunking, Squeaking)

• Себеби: Loose hardware, components rubbing, or worn factory parts.
• Чечим: Inspect all bolts and nuts for tightness. Check for any contact points between suspension components or between components and the vehicle frame. Lubricate bushings if necessary.

9.3. Steering or Handling Issues

• Себеби: Incorrect wheel alignment, worn steering components, or altered suspension geometry.
• Чечим: Immediately get a professional wheel alignment. Inspect steering and suspension components for wear or damage.

10. Техникалык шарттар

11. Кепилдик жана колдоо

For specific warranty information regarding your maXpeedingrods Lift Leveling Kit, please refer to the warranty documentation included with your purchase or visit the official maXpeedingrods webсайт. Кепилдиктин шарттары жана шарттары ар кандай болушу мүмкүн.

If you encounter any issues during installation or operation, or require technical assistance, please contact maXpeedingrods customer support through their official channels. Provide your product model number (TP14OA) and purchase details for efficient service.