Segotep 657768584329

Segotep PC Power Button Extension Cable User Manual

Модель: 657768584329

Продукт бүттүview

The Segotep PC Power Button On/Off Reset HDD Button Extension Cable provides a convenient external control solution for your desktop computer. This device allows you to power on/off, reset your PC, and monitor hard drive activity from a remote location, eliminating the need to reach for the computer case's built-in buttons. It features a 5.3-foot cable, making it suitable for various setups, including offices, homes, internet cafes, and multimedia classrooms.

Segotep PC Power Button Extension Cable with blue LED light

Image: The Segotep PC Power Button Extension Cable, featuring a prominent blue LED power button, a smaller reset button, and the various motherboard connector cables.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

  • Оңой орнотуу: Designed for straightforward setup by replacing existing front panel connectors.
  • Ыңгайлуу операция: Provides an accessible power and reset switch for your PC.
  • Энелик платаны коргоо: Includes a metal sleeve to secure the cable and prevent accidental disconnections.
  • LED көрсөткүчтөрү: Features blue LED for power status and red flickering LED for hard drive activity.
  • Ар тараптуу колдонуу: Long 5.3ft cable supports various desktop computer environments.

Орнотуу боюнча колдонмо

Follow these steps carefully to install your Segotep PC Power Button Extension Cable. Ensure your computer is powered off and unplugged from the wall outlet before beginning installation.

  1. Шассиди даярдаңыз: Remove a chassis expansion slot baffle from the back of your computer case. The specific baffle to remove may vary depending on your computer case design.

    Step 1: Removing a chassis expansion slot baffle

    Image: Illustration showing the removal of a metal expansion slot cover from the back of a PC case.

  2. Motherboard менен туташуу: Carefully connect the I/O connector cables from the extension switch through the expansion slot to the corresponding FPANEL port on your motherboard. Refer to your motherboard's manual for the exact pinout of the front panel header (FPANEL).

    Motherboard front panel connector pinout diagram

    Image: Diagram showing the various front panel connectors (POWER LED+, POWER LED-, POWER SW, RESET SW, H.D.D LED+) and a close-up of a motherboard's FPANEL header.

    The cable includes a metal sleeve designed to sit securely in the card-slot cover, preventing accidental pulling or disconnection from the motherboard, thus ensuring safety and stability.

  3. Кабелди бекемдөө: Fix the buckle in the middle of the cable to the groove of the cable fixing baffle. This helps manage the cable and keeps it tidy.

  4. Install Fixing Baffle: Install the cable fixing baffle to the corresponding expansion slot and secure it with screws. This holds the cable firmly in place at the back of the case.

  5. Акыркы жайгаштыруу: Position the external power button unit in a convenient location on your desk or workspace. The 5.3-foot cable provides ampийкемдүү жайгаштыруу үчүн узундук.

    Segotep PC Power Button Extension Cable placed on a desk next to a monitor

    Image: The external power button unit positioned on a desk, demonstrating its use in a typical computer setup.

Операция

Operating the Segotep PC Power Button Extension Cable is straightforward:

  • Күйгүзүү/өчүрүү: Press the large central button with the power symbol to turn your computer on or off. This button features a blue LED light that illuminates when the computer is powered on.
  • Кайтаруу: Press the smaller button located next to the main power button to reset your computer.
  • HDD Activity Indicator: The blue LED light will flicker with red accents when your computer is loading data or performing memory-intensive tasks, indicating hard drive activity.
Finger pressing the power button on the extension cable

Image: A hand pressing the illuminated blue power button on the Segotep extension cable.

Техникалык тейлөө

The Segotep PC Power Button Extension Cable requires minimal maintenance to ensure its longevity and proper function:

  • Тазалоо: Use a soft, dry cloth to wipe the surface of the button unit. Avoid using liquid cleaners or abrasive materials, as they may damage the finish or internal components.
  • Кабелдик башкаруу: Ensure the cable is not kinked, pinched, or placed under heavy objects, which could damage the internal wiring.
  • Курчап турган чөйрө: Keep the device in a dry environment, away from excessive heat, direct sunlight, and moisture.

Проблемаларды чечүү

If you encounter issues with your Segotep PC Power Button Extension Cable, refer to the following common problems and solutions:

КөйгөйМүмкүн себепЧечим
Computer does not power on/off when button is pressed.
  • Incorrect connection to motherboard.
  • Бошоң байланыш.
  • Motherboard front panel header issue.
  • Verify that the "POWER SW" connector is correctly plugged into the motherboard's power switch pins. Consult your motherboard manual for the correct pinout.
  • Бардык туташтыргычтар бекем орнотулганын текшериңиз.
  • Test the motherboard's front panel header with the original case power button if available, or by momentarily shorting the power pins with a screwdriver (only if comfortable and knowledgeable).
Blue LED does not light up.
  • Incorrect "POWER LED" connection.
  • Reversed polarity of LED connector.
  • Check that the "POWER LED+" and "POWER LED-" connectors are correctly plugged into the motherboard's power LED pins.
  • If the LED does not light up, try reversing the "POWER LED+" and "POWER LED-" connectors, as LEDs are polarity sensitive.
Red LED (HDD activity) does not flicker.
  • Incorrect "H.D.D LED" connection.
  • Reversed polarity of LED connector.
  • Check that the "H.D.D LED+" and "H.D.D LED-" connectors are correctly plugged into the motherboard's HDD LED pins.
  • If the LED does not light up, try reversing the "H.D.D LED+" and "H.D.D LED-" connectors.
Reset button does not work.
  • Incorrect "RESET SW" connection.
  • Бошоң байланыш.
  • Verify that the "RESET SW" connector is correctly plugged into the motherboard's reset switch pins.
  • Туташтыргыч бекем орнотулганын текшериңиз.

Техникалык шарттар

БрендСеготеп
Модель номери657768584329
Туташтыргыч түрүStandard Front Panel Connectors (Power SW, Reset SW, Power LED, HDD LED)
Кабелдин узундугуБолжол менен 5.3 фут (1.6 метр)
Шайкеш түзмөктөрDesktop PCs, Computer Cases
LED көрсөткүчтөрүBlue (Power), Red (HDD Activity)
Продукциянын өлчөмдөрү (L x W x Y)5.51 x 4.72 x 1.97 дюйм
Элемент Салмагы5 унция
Максималдуу томtage12 вольт (ток)

Кепилдик жана колдоо

Segotep products are designed for reliability and performance. This product is covered by a 5 жылдык кепилдик, reflecting Segotep's commitment to quality and customer satisfaction.

For technical support, troubleshooting assistance, or warranty claims, please contact Segotep customer service through their official webсайтына же сиз продуктуну сатып алган сатуучуга кайрылыңыз. Колдоо кызматына кайрылганда моделиңиздин номерин (657768584329) жана сатып алуу маалыматын даярдап коюңуз.

For more information about Segotep and their products, you can visit the official Segotep store on Amazon: Segotep Amazon Store.

© 2024 Segotep. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.