Introduction
The Behringer CLOCKED SEQUENTIAL CONTROL MODULE 1027 is a faithful reproduction of the legendary 2500 Series 8-position step sequencer. Designed for Eurorack systems, this module provides precise control over voltage and gate signals, making it an essential tool for creating complex melodic and rhythmic patterns in your modular synthesizer setup. Its robust design and intuitive interface ensure reliable performance and creative flexibility.
Маанилүү коопсуздук нускамалары
- Read these instructions thoroughly before operating the module.
- Бул нускамаларды келечектеги маалымат үчүн сактаңыз.
- Продукттагы жана колдонмодогу бардык эскертүүлөргө кулак салыңыз.
- Коопсуз иштетүү үчүн бардык нускамаларды аткарыңыз.
- Бул аппаратты сууга же нымга жакын колдонбоңуз.
- Кургак чүпүрөк менен гана тазалаңыз.
- Эч кандай вентиляция тешиктерин жаап албаңыз. Өндүрүүчүнүн көрсөтмөлөрүнө ылайык орнотуу.
- Радиаторлор, жылуулук регистрлери, мештер же башка аппараттар (анын ичинде) сыяктуу жылуулук булактарынын жанына орнотпоңуз ampкөтөргүчтөр) жылуулукту пайда кылуучу.
- Өндүрүүчү тарабынан көрсөтүлгөн тиркемелерди/аксессуарларды гана колдонуңуз.
- Бардык тейлөөнү квалификациялуу тейлөө кызматкерлерине тапшырыңыз. Аппарат кандайдыр бир жол менен бузулганда тейлөө талап кылынат.
Жайгашуу
Eurorack орнотуу
The CLOCKED SEQUENTIAL CONTROL MODULE 1027 is designed for installation into a standard Eurorack case. Ensure your Eurorack case has sufficient power and space (16 HP width) before installation.
- Өчүрүү: Always disconnect power from your Eurorack case before installing or removing any modules.
- Монтаждоо: Align the module with an available 16 HP space in your Eurorack case. Secure it using the provided screws.
- Кубат туташуу: Connect the 16-pin power cable from your Eurorack power supply to the module's power header. Ensure the red stripe on the cable aligns with the -12V pin on both the module and the power supply. Incorrect connection can damage the module and/or power supply.
- Күйгүзүү: Once securely mounted and connected, you can power on your Eurorack case.
Сүрөт 1: Алдыңкы view of the Behringer 1027 module, showing all controls and patch points. This image illustrates the module's layout for proper installation and connection within a Eurorack system.
Баштапкы байланыштар
To begin using the 1027, connect its outputs to other modules in your Eurorack system. Common connections include:
- Clock Input (CLK IN): Connect a clock signal from another module (e.g., an LFO or clock divider) to the CLK IN jack to drive the sequencer.
- CV Outputs (CH A, CH B, CH C): Patch these outputs to the CV inputs of oscillators, filters, or other modules to control pitch, cutoff, or other parameters.
- Gate Outputs (POSITION GATES 1-8): Connect these to gate inputs of envelope generators or drum modules to trigger events at specific steps.
Сүрөт 2: Жакын пландан view of the input and output jacks on the Behringer 1027 module, highlighting the various patch points for integration into a modular system.
Иштөө нускамалары
Бүттүview Controls
The 1027 module features a clear layout of controls for intuitive sequencing:
- RATE баскычы: Adjusts the speed of the internal clock. The range switch (LOW/HIGH) selects the clock speed range.
- PULSE WIDTH Knob: Controls the width of the gate pulses. The switch (INT/EXT) selects between internal control or external CV control.
- ON/OFF которуу: Toggles the sequencer's operation.
- STEP Buttons (1-8): Each step has a corresponding button to activate/deactivate it.
- CV Knobs (A, B, C for each step): Adjust the control voltage output for each of the three channels (A, B, C) at each step.
- POSITION GATES (1-8): Individual gate outputs for each step.
- STEP/RESET Buttons: Manual step advance and reset functions.
3-сүрөт: Бурчтуу view of the Behringer 1027 module, providing a clear perspective of the control knobs and buttons for each step and channel.
Creating a Sequence
- Саатты коюу: колдонуу БАА баскыч жана ТӨМЕН/ЖОГОРКУ switch to set the desired tempo. Alternatively, connect an external clock to the CLK IN джек.
- Activate Steps: басыңыз КАДАМ buttons (1-8) to activate the desired number of steps in your sequence. Active steps will typically illuminate.
- Adjust CV: For each active step, turn the CV Knobs (A, B, C) том коюуtage level for each channel. These voltages will be outputted sequentially.
- Configure Gates: The POSITION GATES will output a pulse when their corresponding step is active. Use these to trigger envelopes or other events.
- Баштоо/Токтоо: колдонуу КҮЙГҮЗҮҮ/ӨЧҮРҮҮ switch to start and stop the sequence.
Advanced Features
- External Pulse Width Control: Connect a CV source to the EXT input for the PULSE WIDTH section to dynamically control the gate pulse width.
- Manual Step/Reset: The КАДАМ жана RESET buttons allow for manual control over the sequence progression, useful for live performance or precise programming.
Техникалык тейлөө
Тазалоо
To maintain the appearance and functionality of your module:
- Always power off your Eurorack system before cleaning.
- Use a soft, dry, lint-free cloth to wipe the module's surface.
- өжөр кир үчүн, бир аз гampчүпүрөктү суу менен. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонуудан алыс болуңуз.
- Do not allow any liquids to enter the module through jacks or openings.
Сактагыч
When not in use for extended periods, store the module in a cool, dry place, away from direct sunlight and extreme temperatures. If removed from the Eurorack case, store it in anti-static packaging.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Модуль күйбөйт. | Incorrect power cable connection; Eurorack power supply off or faulty. | Check power cable orientation (red stripe to -12V). Ensure Eurorack power supply is on and functioning correctly. |
| Sequencer not advancing steps. | No clock signal; ON/OFF switch is OFF; RATE knob set too low. | Connect a clock signal to CLK IN. Ensure ON/OFF switch is ON. Increase the RATE knob setting. |
| No CV output from a channel. | CV knob for that step/channel is at minimum; step is not active. | Adjust the corresponding CV knob. Ensure the step is active (illuminated). |
| No Gate output from a position. | Step is not active; PULSE WIDTH set to minimum. | Ensure the step is active. Increase the PULSE WIDTH setting. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | 1027 |
| Модул түрү | Сааттуу ырааттуу башкаруу модулу |
| Сериялар | 2500 серия |
| Формат | Eurorack |
| Туурасы | 16 HP |
| Тереңдик | Not specified (typical Eurorack depth) |
| Энергияны керектөө | Not specified (standard Eurorack +12V, -12V) |
| Киргизүүлөр | Clock In, External Pulse Width CV |
| Чыгуулар | 3 x CV (A, B, C), 8 x Gate (Position Gates) |
| Өлчөмдөрү (H x W x D) | 43 x 162 x 129 мм (болжол менен 1.69 x 6.38 x 5.08 дюйм) |
| Элемент Салмагы | 0.77 фунт (болжол менен 0.35 кг) |
| Байланыш технологиясы | 3.5 мм TS уячасы |
| Power Source | DC power supply (via Eurorack bus) |
Кепилдик
Behringer products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please visit the official Behringer website or the Music Tribe Community portal. Warranty services are typically handled through authorized service centers.
Кепилдиктин сүрөттөлүшү: Community. Musictribe. Com.
Колдоо
For further assistance, technical support, or to download the latest firmware and documentation, please visit the official Behringer webсайт:
- Берингер расмий Webсайт
- Music Tribe Community (for warranty and support information)
You can also contact your local Behringer dealer or distributor for product-specific inquiries.