ONVIAN Smart Bike Light with Turn Signals, Horn, and Alarm

Introduction

The ONVIAN Smart Bike Light is a multi-functional device designed to enhance cycling safety and security. It integrates a rear light with turn signals, a horn, a brake light, and an anti-theft alarm system. This manual provides detailed instructions for the proper installation, operation, and maintenance of your device.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Bike Alarm Tail Light
• Зымсыз алыстан башкаруу
• USB заряддоо кабели
• Монтаждоо кронштейн жана аксессуарлар
• Колдонуучунун Колдонмосу (бул документ)

Продукт өзгөчөлүктөрү

The ONVIAN Smart Bike Light offers several key features:

• 5-ин-1 Функциясы: Combines turn signals, warning light, brake light, electric bell, and anti-theft alarm.
• Ultra-Bright Taillight: 31 COB LEDs provide 160 lumens with a 200-degree wide-angle for enhanced visibility.
• Бир нече жарык режимдери: Six modes available: Slow Flashing, Breathing, Fast Blinking, Steady Light, Emergency Light, and OFF.
• Directional Turn Signals: Wireless remote control activates left/right turn signals.
• Integrated Electric Bell: Features three distinct sounds: Electric Car Sound, Horn Sound, and Birdcall Sound.
• 110 dB Anti-theft Alarm: Deters theft with a loud alarm sound and adjustable sensitivity (1-7 levels).
• IP54 суу өткөрбөйт рейтинги: Ар кандай аба ырайынын шарттарында ишенимдүү иштөөнү камсыз кылат.
• USB-C кайра заряддалуучу: Built-in 2000mAh battery provides up to 70 hours of use on a 7-hour full charge.
• Акылдуу тормоз сенсору: Automatically highlights the brake light for 2 seconds upon braking (except in Emergency Light Mode).
• Intelligent Auto On/Off: In "Slowing Flashing" and "Breathing" modes, the light adjusts based on ambient brightness and vibration.

Сүрөт: бүттүview of the ONVIAN Smart Bike Light's multi-functional capabilities, including turn signals, brake sensor, alarm, remote control, and electric bell, compared to basic taillights.

Орнотуу жана орнотуу

1. Аппаратты заряддоо

Before first use, fully charge the bike light. Connect the provided USB charging cable to the USB-C port on the light and to a standard USB charger (5V/1A recommended). A full charge takes approximately 7 hours and provides up to 70 hours of operation depending on the mode used.

Маанилүү: Use only the original USB cable for charging. The device does not support fast charging. Using a fast-charging cable or adapter may damage the battery.

Image: Illustration of the bike light's 2000mAh battery capacity and USB-C charging method, showing connection to a wall adapter.

2. Mounting the Tail Light

The tail light is designed for seatpost mounting. Use the provided bracket and accessories to securely attach the light to your bicycle's seatpost. Ensure the light is facing directly backward and is not obstructed.

The mounting bracket includes spare rubber collars to accommodate various seatpost diameters. Adjust as necessary for a snug fit.

Image: The ONVIAN Smart Bike Light mounted on a bicycle seatpost, demonstrating its rear position and visibility.

3. Attaching the Wireless Remote Control

Attach the wireless remote control to your bicycle's handlebar. The clamp is designed to fit handlebars with a diameter between 0.78-0.94 inches (20-24mm). Position it within easy reach for safe operation while riding.

Image: The wireless remote control mounted on a bicycle handlebar, illustrating its accessible placement for controlling the bike light's functions.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү

Press the main power button on the tail light unit to turn it on or off. The light will typically start in the last used mode.

2. Жарык режимдерин өзгөртүү

Use the remote control to cycle through the six available lighting modes:

• Жай жаркылдоо
• Дем алуу
• Fast Blinking
• Туруктуу жарык
• Шашылыш жарык
• ӨЧҮРҮҮ

Image: Visual representation of the six distinct light modes, including red taillight options and yellow emergency/off states.

3. Using Turn Signals

Press the left or right arrow button on the wireless remote control to activate the corresponding turn signal. The signal will flash to indicate your turning intention to other road users. Press the button again to deactivate.

4. Activating the Electric Bell (Horn)

The remote control includes a button to activate the electric bell. There are three distinct horn sounds: Electric Car Sound, Horn Sound, and Birdcall Sound. Cycle through these sounds by pressing the horn button repeatedly.

Абайлаңыз: Avoid using the horn in enclosed spaces as its 110dB volume can be very loud.

5. Anti-theft Alarm Function

To arm the anti-theft alarm, press the alarm button on the remote control. The light will beep to confirm the alarm is set. Any significant vibration or movement of the bike will trigger a loud 110dB alarm sound to deter potential thieves. To disarm, press the disarm button on the remote.

Image: The anti-theft bike alarm in action, illustrating its 110dB sound to deter theft.

6. Акылдуу тормоз сенсору

The tail light features a smart brake sensor. When you brake or slow down, the light will automatically illuminate brighter for 2 seconds to alert vehicles and pedestrians behind you. This feature is active in all modes except "Emergency Light Mode."

Image: A cyclist demonstrating the intelligent induction brake feature, where the light brightens upon braking.

7. Intelligent Auto On/Off

In "Slowing Flashing" and "Breathing" modes, the light operates intelligently:

• It will light up for 30 seconds upon activation.
• It detects ambient brightness, automatically turning off in bright conditions and on in dark conditions.
• If stationary for more than 30 seconds in a dark environment, it will turn off to conserve power and reactivate upon detecting vibration.

Техникалык тейлөө

1. Заряддоо

Recharge the device when the battery indicator shows low power. Always use the provided USB-C cable and a standard 5V/1A charger. Avoid fast chargers.

2. Тазалоо

Wipe the light and remote control with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.

3. Сууга туруктуулук

The device has an IP54 waterproof rating, meaning it is protected against dust and splashing water from any direction. While it can withstand rain, avoid submerging it in water or exposing it to heavy, prolonged downpours to prevent potential damage.

Image: The durable PC + UV resistant material of the bike light, highlighting its resilience against various weather conditions like rain, snow, and sun.

4. Алыстан башкаруунун батареясын алмаштыруу

The remote control is equipped with a replaceable CR2032 coin cell battery. When the remote's range decreases or it stops responding, replace the battery. Refer to the remote control's specific instructions for battery access.

Проблемаларды чечүү

1. Alarm is too sensitive or not sensitive enough

The alarm's vibration sensitivity can be adjusted (levels 1-7).

1. Ensure the tail light is in куралдан ажыратуу режими.
2. Press and hold the light mode button (lower light button) on the remote until the remote indicator light turns off and then lights up again, and the alarm taillight emits a beep.
3. басыңыз [left/right] button on the remote to select the desired vibration sensitivity level (1-7).
4. Press the light mode button (lower light button) again to exit the setting mode.

2. Light not charging or holding charge

• Ensure you are using the original USB-C cable.
• Verify that your charger is a standard 5V/1A adapter and not a fast charger.
• Заряддоо портунда таштанды же зыяндын бар-жоктугун текшериңиз.

3. Remote control not responding

• Check and replace the CR2032 coin cell battery in the remote control.
• Ensure the remote is within the effective wireless range (up to 60m).

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Onvian customer service through their official channels. Specific warranty terms may vary by region and retailer.