Gravity LTS T 01 Adjustable Laptop Stand User Manual

1. Киришүү

The Gravity LTS T 01 is an adjustable laptop stand designed for secure and stable positioning of laptops, DJ controllers, mixers, and other equipment. Its robust aluminum construction and versatile adjustments make it suitable for various applications, from stage performances to studio work.

This manual provides essential information for the safe and effective use of your Gravity LTS T 01 laptop stand. Please read it thoroughly before assembly and operation, and retain it for future reference.

2. Коопсуздук маалыматы

• Ensure all components are securely fastened before placing any equipment on the stand.
• Стенддин максималдуу салмак көтөрүү мүмкүнчүлүгүнөн ашпаңыз.
• Avoid placing the stand on uneven or unstable surfaces.
• Кысылып калбашы үчүн, жөндөө учурунда кыймылдуу бөлүктөрдөн колуңузду алыс кармаңыз.
• Ар кандай эскирүү же бузулуу белгилерин такай текшерип туруңуз. Бузулган болсо колдонбоңуз.
• This stand is designed for indoor use. Avoid exposure to extreme weather conditions.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• Gravity Laptop Stand with Adjustable Holding Pins (LTS T 01)
• Adjustable Holding Pins (pre-installed or separate)
• Clamps (pre-installed or separate)

4. Орнотуу нускамалары

4.1 Штативдин негизин жайуу

Carefully unfold the tripod legs until they are fully extended and stable. Ensure the locking mechanism for the legs is engaged.

Image 1: The Gravity LTS T 01 Laptop Stand with its tripod base fully extended, ready for use.

4.2 Attaching the Mounting Plate

Align the mounting plate with the top pole of the stand. Secure the plate using the provided attachment mechanism. Ensure it is firmly seated and tightened to prevent wobbling.

Сүрөт 2: Жакын пландан view of the mounting plate attachment point on the Gravity LTS T 01, highlighting the secure connection.

4.3 Adjusting Holding Pins

The mounting plate features 14 slots in the top section and 2 slots in the bottom section for the adjustable holding pins. Position these pins to securely cradle your laptop (12" to 17") or other equipment. Press the pins onto the device and lock them into place from below using the set screws.

Image 3: The top surface of the Gravity LTS T 01 mounting plate, showing the slots and adjustable holding pins for securing devices.

5. Иштөө нускамалары

5.1 Бийиктигин тууралоо

The stand's height can be adjusted from 750 mm to 1320 mm. Loosen the height adjustment knob on the main pole, raise or lower the pole to the desired height, and then securely tighten the knob. Ensure the stand remains stable after adjustment.

5.2 Tilting the Mounting Plate

The mounting plate can be tilted continuously by 180 degrees. Loosen the tilt adjustment knob located beneath the plate, set the desired angle (vertical or horizontal), and then firmly tighten the knob to lock the position.

5.3 Securing Your Device

Once the stand is at the desired height and tilt, place your laptop or equipment onto the mounting plate. Adjust the holding pins to firmly grip the device, ensuring it is stable and cannot slide off. Tighten the set screws on the holding pins from below to secure them.

6. Техникалык тейлөө

• Тазалоо: Стендди жумшак менен сүртүңүз, гamp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Текшерүү: Periodically check all screws, knobs, and joints for tightness. Tighten any loose fasteners.
• Сактагыч: Колдонулбай турганда, компакттуу сактоо үчүн стендди бүктөп коюңуз. Кургак, өтө жогорку температурадан алыс жерде сактаңыз.

7. Кыйынчылыктарды

7.1 Stand is Unstable

• Штативдин буттары толугу менен сунулганын жана бекитилгенин текшериңиз.
• Стенддин тегиз, тегиз жерге коюлганын текшериңиз.
• Check that all adjustment knobs (height, tilt) are securely tightened.

7.2 Difficulty Adjusting Height or Tilt

• Ensure the corresponding adjustment knob is sufficiently loosened before attempting to move the component.
• Do not force adjustments. If resistance is met, re-check the knob and ensure no obstructions are present.

7.3 Device Not Secure on Plate

• Re-position the adjustable holding pins to firmly grip your device.
• Ensure the set screws for the holding pins are tightened from below the plate.
• Confirm your device size is within the recommended 12" to 17" range.

8. Техникалык шарттар

9. Кепилдик жана колдоо

9.1 Кепилдик маалыматы

This Gravity LTS T 01 laptop stand comes with a 5 жылдык өндүрүүчүнүн кепилдиги. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз. Кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

9.2 Кардарларды колдоо

For technical assistance, troubleshooting, or warranty inquiries, please contact Gravity customer support through their official website or your retailer. Have your model number (LTS T 01) and proof of purchase ready when contacting support.