iMaihom 130W LED Flood Light (Model BDD130D-3) Instruction Manual

Продукт бүттүview

The iMaihom 130W LED Flood Light (Model BDD130D-3) is designed for outdoor illumination, featuring a dusk-to-dawn photocell sensor and three adjustable light heads. This unit provides high brightness and is built for durability in various weather conditions.

• Жогорку жарыктык: Equipped with 154 high-quality LED chips, producing up to 13000 lumens.
• Күүгүм киргенден таң атканга чейинки функция: Built-in sensitive photocell sensor automatically turns the light on at nightfall and off at daybreak.
• Жөнгө салынуучу баштар: Three light heads can be rotated to different angles, covering a wide lighting area up to 1850 sq. ft.
• Туруктуу курулуш: IP65 waterproof rating and full aluminum body ensure resistance to rain, sleet, snow, and efficient heat dissipation.

Кутуда эмне бар

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз.

• iMaihom 130W LED Flood Light Unit
• Black Silicone Cap (for switch-controlled mode)
• Mounting Hardware (screws, anchors, wire nuts)

Орнотуу жана орнотуу

This flood light is designed for hardwired installation to a junction box. Ensure power is turned off at the circuit breaker before beginning installation.

Орнотуу кадамдары:

1. Монтаждоо бетин даярдаңыз: Identify a suitable junction box location on a wall or under eaves/soffits. Ensure the junction box is waterproof for outdoor use.
2. Монтаждоо плитасын бекитүү: Берилген бурамалар аркылуу монтаждоо плитасын бириктирүүчү кутуга бекитиңиз.
3. Зым байланыштары: Прожектордун зымдарын үйүңүздүн зымдарына туташтырыңыз:
   • Black wire (Live) to Black wire
   • Ак зымдан (Нейтралдуу) Ак зымга
   • Green/Yellow wire (Ground) to Green/Ground wire
   Туташтырууларды бекитүү үчүн берилген зым гайкаларын колдонуңуз.
4. Жарык берүүчү аспапты орнотуу: Align the flood light fixture with the mounting plate and secure it with the central screw.
5. Seal the Fixture: Ensure the gasket is properly seated to maintain the IP65 waterproof rating.
6. Жарык баштарын тууралоо: Loosen the screws on the side of each light head to adjust their angle as needed. Tighten screws to secure the position.
7. Күчтү калыбына келтирүү: Автоматтык өчүргүчтүн кубатын күйгүзүңүз.

Figure 1: Hardwired Installation Steps. Shows the three steps for connecting the light to a junction box.

Figure 2: Eave and Wall Installation Examples. Demonstrates the versatility of mounting options.

Figure 3: Adjustable Heads and Photocell. Illustrates the rotational capability of the light heads and the location of the photocell.

Иштөө режимдери

The iMaihom 130W LED Flood Light offers two operating modes:

1. Dusk-to-Dawn Mode (Default)

In this mode, the built-in photocell sensor automatically detects ambient light levels. The light will turn on when it gets dark (nightfall) and turn off when it gets bright (daybreak).

• No manual intervention required.
• Energy efficient operation.

Figure 4: Dusk-to-Dawn Operation. The light automatically activates at dusk and deactivates at dawn.

2. Switch-Controlled Mode

To operate the light manually via a wall switch, cover the photocell sensor with the provided black silicone cap. This disables the automatic dusk-to-dawn function, allowing you to control the light with your existing wall switch.

• Allows manual ON/OFF control.
• Ideal for situations where continuous lighting is not desired or specific timing is needed.

Figure 5: Switching to Manual Control. Instructions for using the black silicone cap to enable switch-controlled operation.

Техникалык тейлөө

The iMaihom 130W LED Flood Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Тазалоо: Periodically clean the light heads and photocell sensor with a soft, damp Кирди, чаңды же таштандыларды кетирүү үчүн чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Текшерүү: Зымдарды жана бекиткичтерди эскирүүнүн, бузулуунун же бош туташуулардын белгилерин үзгүлтүксүз текшерип туруңуз. Кандайдыр бир көйгөйлөрдү тез арада чечип туруңуз.
• Photocell Obstruction: Ensure the photocell sensor is not obstructed by leaves, dirt, or other objects, as this can interfere with its automatic operation.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

The iMaihom 130W LED Flood Light (Model BDD130D-3) comes with a 2 жылдык кепилдик from the manufacturer. For technical support, warranty claims, or further assistance, please contact iMaihom customer service through their official webпродукт сатылып алынган сайт же сатуучу.

For more information about iMaihom products, visit the iMaihom Store on Amazon.

Продукт видеолору