ENGINDOT DMS03 4-in-1 Wall Scanner Instruction Manual

1. Продукт бүтүп калдыview

The ENGINDOT DMS03 is a versatile 4-in-1 wall scanner designed for accurate and quick detection of various materials behind walls. It can identify wood studs, ferrous metals, non-ferrous metals, and live AC wires, making it an essential tool for home renovation, decoration, and daily maintenance tasks. This device features an upgraded smart chip for precise detection, automatic calibration, and clear visual indicators on a large LCD screen.

2. Коопсуздук маалыматы

Түзмөктү колдонуудан мурун бардык коопсуздук көрсөтмөлөрүн окуп чыгып, түшүнүп алыңыз. Бул көрсөтмөлөрдү аткарбоо электр тогуна урунууга, өрткө же олуттуу жаракат алууга алып келиши мүмкүн.

• Always assume that live electrical wires are present in the wall. Exercise extreme caution when drilling, cutting, or prying into walls, ceilings, or floors.
• Do not rely solely on the detector to locate items behind the scanning surface. Use other information sources such as construction plans, visible entry points of pipes and wires, and common sense.
• Түзмөктү кургак жана таза кармаңыз. Аны нымдуулукка же өтө жогорку температурага дуушар кылбаңыз.
• Use only the specified battery type (9V). Ensure correct polarity during installation.
• Эгерде түзмөк көпкө чейин колдонулбаса, агып кетүүнүн алдын алуу үчүн батарейканы чыгарып коюңуз.

3. Орнотуу

3.1 Батареяны орнотуу

The ENGINDOT DMS03 requires one 9V battery (included). To install the battery:

1. Аппараттын артындагы батарея бөлүкчөсүнүн капкагын табыңыз.
2. Капкакты жылдырыңыз.
3. Жаңы 9 В батареяны салып, оң (+) жана терс (-) терминалдары бөлүмдүн ичиндеги белгилер менен туура дал келгенин текшериңиз.
4. Батарея уясынын капкагын бекем жабыңыз.

3.2 Баштапкы күйгүзүү жана калибрлөө

After installing the battery, press the power button to turn on the device. The DMS03 features automatic calibration. Place the device flat against the wall surface where you intend to scan, away from any known studs or wires. The signal lights will show green when the detector is calibrated and ready for use.

4. Иштөө режимдери

The ENGINDOT DMS03 offers multiple scanning modes to detect different materials at varying depths. Use the mode selection button to switch between modes.

4.1 Wood Scan Modes

The device has two wood scanning modes for precise stud location:

• Precise Wood Scan: Detects wood studs up to 0.75 inches (20 mm) deep.
• Deep Wood Scan: Can penetrate two layers of drywall, detecting wood studs up to 1.5 inches (38 mm) thick.

These modes accurately locate the center and edges of wood studs.

4.2 Metal Scan Modes

The DMS03 can detect both ferrous and non-ferrous metals:

• Ferrous Metal Scan: Detects ferrous metals (e.g., rebar) up to 3.15 inches (80 mm) deep.
• Non-Ferrous Metal Scan: Detects non-ferrous metals (e.g., copper pipes) up to 4 inches (100 mm) deep.

4.3 AC Wire Scan

This mode detects live electrical wires up to 2 inches (50 mm) deep. The live AC wire scanning function operates continuously, regardless of the selected detection mode, providing an added layer of safety.

4.4 Detection Indicators

The device uses a combination of signal lights and an LCD screen to indicate detection:

• Жашыл жарык: Indicates the device is calibrated and ready for scanning.
• Сары жарык: Illuminates as you approach a target object.
• Кызыл жарык: Indicates the device has located the center of the target object.
• LCD экран: Provides detailed information, including signal strength, depth indication, and object type.

5. Колдонуу боюнча көрсөтмөлөр

For optimal performance, follow these guidelines when using your DMS03 wall scanner:

1. Жайгашкан жери: Place the device flat against the scanning surface. Ensure full contact.
2. Кыймыл: Move the scanner slowly and steadily across the surface. Avoid tilting or lifting the device during scanning.
3. Бир нече өтүүлөр: For best results, perform multiple scans over the same area from different directions.
4. Surface Types: The detector works effectively on various surfaces including drywall, wallpaper, popcorn ceilings, fabric, plaster walls, and textured surfaces.
5. Тиркемелер: Ideal for hanging picture frames, mounting TVs, installing furniture, and identifying electrical wiring before drilling.

6. Техникалык тейлөө

Proper maintenance ensures the longevity and accuracy of your ENGINDOT DMS03 wall scanner.

• Тазалоо: Аппаратты жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Сактагыч: Аппаратты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
• Батарея: Remove the 9V battery if the device will not be used for an extended period to prevent battery leakage and potential damage to the electronics.
• Коргоо: The device features a sturdy structure and a soft rubber button for durability and comfort. The cotton on the back helps prevent damage to the wall during use.

7. Кыйынчылыктарды

If you encounter issues with your DMS03, refer to the following common problems and solutions:

8. Техникалык шарттар

9. Кепилдик жана колдоо

ENGINDOT products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or contact ENGINDOT customer service through the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.