Vaporesso VS100G16-10

Vaporesso Gen 160 электрондук тамеки топтому Колдонуучунун колдонмосу

Model: VS100G16-10

Introduction

This manual provides detailed instructions for the safe and effective use of your Vaporesso Gen 160 E-Cigarette Set. The set includes the Gen 160 Mod and the GTX Pod 26 Clearomizer. Please read this manual thoroughly before operating the device to ensure proper function and longevity. This product is designed for adult use only and contains no nicotine.

Vaporesso Gen 160 E-Cigarette Set in pink and black, showing the mod and the attached GTX Pod 26 Clearomizer.

Image: The Vaporesso Gen 160 E-Cigarette Set, featuring the pink and black textured mod with the black GTX Pod 26 Clearomizer attached at the top.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизде бар экенин текшериңиз:

  • 1x Vaporesso Gen 160 Mod
  • 1x Vaporesso GTX Pod 26 Clearomizer (5 ml capacity)
  • 1x GTX Mesh Coil 0.15 Ohm (pre-installed or separate)
  • 1x GTX Mesh Coil 0.3 Ohm
  • 1x USB-C заряддоо кабели
  • 1x Колдонуучунун колдонмосу (бул документ)

Эскертүү: Two 18650 battery cells are required for operation and are жок included in the package. These must be purchased separately.

Орнотуу колдонмосу

1. Батареяны орнотуу

  1. Open the battery compartment cover located at the bottom or side of the Gen 160 Mod.
  2. Insert two 18650 battery cells according to the polarity indicators (+ and -) inside the compartment. Incorrect installation can damage the device.
  3. Батарея уясынын капкагын бекем жабыңыз.

2. Coil Installation (if not pre-installed)

  1. Remove the GTX Pod 26 Clearomizer from the Gen 160 Mod.
  2. Flip the pod upside down. The coil is press-fitted into the base.
  3. Align the new GTX Mesh Coil with the slot in the pod and firmly push it into place until it is seated securely.
  4. Ensure the coil is fully inserted to prevent leaks.

3. Резервуарды толтуруу

  1. Locate the top-filling port on the GTX Pod 26 Clearomizer. This is usually under a silicone plug.
  2. Силикон сайгычты ачыңыз.
  3. Carefully fill the tank with your desired e-liquid through the filling port. Do not overfill.
  4. Close the silicone plug firmly to prevent leaks.
  5. Маанилүү: After filling a new coil for the first time, let the pod stand for at least 5-10 minutes to allow the coil to become fully saturated with e-liquid. This prevents dry hits and extends coil life.

Иштөө нускамалары

1. Күйгүзүү/өчүрүү

  • To turn the device on or off, press the fire button (main button) 5 times rapidly within 2 seconds. The OLED display will indicate the power status.

2. Жөндөө Wattage

  • The Gen 160 Mod operates in Variable Wattage (VW) mode by default, with an output range of 5 to 160 Watts.
  • Use the '+' and '-' adjustment buttons (usually located below the display) to increase or decrease the wattage.
  • Refer to the recommended wattage range for your installed coil:
    • GTX Mesh Coil 0.15 Ohm: 60 - 75 Watts
    • GTX Mesh Coil 0.3 Ohm: 32 - 45 Watts

3. Screen Information (0.91" OLED Display)

The OLED display provides essential information about your device's status:

  • Ватtage: Учурдагы кубаттуулукту чыгаруу.
  • Батарея деңгээли: Батареянын калган зарядын көрсөтүү.
  • Катушканын каршылыгы: The detected resistance of the installed coil (in Ohms).
  • Ачуу эсептегич: Канча жолу дем алганын көзөмөлдөйт.
  • Vaping Time: Duration of the last puff.

4. Vaping

  • Ооздуктан дем алып жатканда өрт баскычын басып, кармап туруңуз. Дем алып бүткөндөн кийин баскычты коё бериңиз.
  • The device features an AXON Chip for stable performance and various safety protections.

5. Locking/Unlocking Buttons

  • To lock or unlock the adjustment buttons (prevent accidental wattage changes), press the fire button 3 times rapidly. The fire button will remain active.

Техникалык тейлөө

1. Тазалоо

  • Regularly clean the connection points between the mod and the pod with a dry cloth or cotton swab to ensure good conductivity.
  • Wipe down the exterior of the device with a soft, damp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз.
  • The Gen 160 Mod is water and dust protected according to IPX5 standard, but it is not fully waterproof. Avoid submerging the device in water.

2. Катушканы алмаштыруу

  • Coils are consumable parts and need to be replaced periodically, typically every 1-2 weeks depending on usage and e-liquid.
  • Signs that a coil needs replacement include a burnt taste, reduced vapor production, or diminished flavor.
  • Follow the "Coil Installation" steps in the Setup Guide to replace the coil.

3. Заряддоо

  • Connect the supplied USB-C cable to the charging port on the Gen 160 Mod and plug the other end into a suitable USB power source (e.g., computer USB port, wall adapter).
  • The device supports DC 5V/2A fast charging.
  • The OLED display will show the charging status. Disconnect the charger once the batteries are fully charged.
  • Батареянын иштөө мөөнөтүн оптималдаштыруу жана коопсуздугу үчүн, 18650 батарейканы тышкы атайын батарея кубаттагычын колдонуп кубаттоо сунушталат.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Түзмөк күйбөй жататBatteries not installed correctly or depleted; device off.Check battery polarity and charge level. Press fire button 5 times rapidly to turn on.
Буу өндүрүшү жокCoil not installed; coil burnt out; tank empty; low battery; device locked.Ensure coil is installed. Replace coil. Refill tank. Charge batteries. Unlock device (3 clicks of fire button).
Күйгөн даамCoil not saturated; coil burnt out; wattage too high; tank empty.Allow new coil to saturate (5-10 min). Replace coil. Reduce wattage. Refill tank.
Подгондон агып жататCoil not seated properly; silicone plug not closed; damaged coil/pod.Ensure coil is fully pushed in. Close silicone plug firmly. Replace coil or pod if damaged.
"Check Atomizer" or "No Atomizer" errorPod not connected; coil issue; dirty connection.Re-seat the pod. Replace the coil. Clean the 510 connection on the mod and the base of the pod.

Техникалык шарттар

  • Модел: Vaporesso Gen 160 E-Cigarette Set
  • Mod Dimensions (with Pod): 135.95 x 52.70 x 27.54 мм
  • Чыгуу Wattage: 5 - 160 Уоттс
  • Дисплей: 0.91" OLED экраны
  • Чипсет: AXON Chip
  • Батарея шайкештиги: 2x 18650 (киргизилген эмес)
  • Заряддоо: USB-C, DC 5V/2A
  • Суу жана чаңдан коргоо: IPX5 стандарты
  • Танк сыйымдуулугу: 5 ml (GTX Pod 26 Clearomizer)
  • Filling System: Top-Filling
  • Аба агымы: Bottom-Airflow
  • Катушка шайкештиги: Vaporesso GTX Coils
  • Recommended Coils (Included):
    • GTX Mesh 0.15 Ohm (60-75W) - For Direct-to-Lung (DL) vaping
    • GTX Mesh 0.3 Ohm (32-45W) - For Direct-to-Lung (DL) vaping
  • Жип түрү: 510 (for pod connection)

Коопсуздук маалыматы

  • Аппаратты балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
  • Бузулган батареяларды же заряддоо түзүлүштөрдү колдонбоңуз.
  • Do not expose the device to extreme temperatures, direct sunlight, or water (beyond IPX5 rating).
  • Аппаратты ажыратпаңыз же өзгөртпөңүз.
  • Use only genuine Vaporesso coils and accessories.
  • This product is intended for use with e-liquids that do not contain nicotine.

Кепилдик жана колдоо

Vaporesso products typically come with a limited warranty. Please refer to the warranty card included in your original packaging or visit the official Vaporesso webдеталдуу кепилдик шарттары жана шарттары үчүн сайт.

For technical support, troubleshooting assistance, or inquiries about your Vaporesso Gen 160 E-Cigarette Set, please contact Vaporesso customer service or the retailer from whom you purchased the product.

Өндүрүүчү: Vaporesso

© 2024 Vaporesso. All rights reserved.

Бул продукт никотинди камтыйт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.