HERTZ MP-165P3
HERTZ MP-165P3 Millie Pro 6.5" орто басс компоненттүү вуферлер үчүн колдонмо
Model: MP-165P3
Introduction
Thank you for choosing HERTZ MP-165P3 Millie Pro 6.5" Mid-Bass Component Woofers. These high-performance car audio woofers are engineered to deliver exceptional sound quality with outstanding dispersion features and a wide low-frequency response. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.
Орнотуу жана орнотуу
Proper installation is crucial for the performance and durability of your HERTZ MP-165P3 woofers. It is recommended that installation be performed by a qualified professional. Always disconnect the vehicle's battery before beginning any electrical work.
1. Таңгактан чыгаруу жана текшерүү
Carefully remove the woofers from their packaging. Inspect all components for any signs of damage. Ensure all listed items are present.

Image: A pair of HERTZ MP-165P3 Millie Pro 6.5" Mid-Bass Component Woofers.

Image: A single HERTZ MP-165P3 woofer shown with included pry tools and a coozy, indicating a bundle.
2. Монтаждоо орду
Select a suitable mounting location in your vehicle, typically door panels or rear deck, that can accommodate the 6.5-inch diameter and mounting depth. Ensure there is sufficient clearance behind the speaker for proper air movement and to avoid interference with vehicle components.
- Монтаждоо тереңдиги: Refer to specifications for exact depth.
- Тазалоо: Verify no obstructions behind the mounting surface.
3. Зымдарды туташтыруу
Динамиктин зымдарын өзүңүздөн туташтырыңыз amplifier to the woofer terminals. Pay close attention to polarity (+ and -) to ensure correct phase and optimal sound reproduction. Incorrect wiring can lead to poor audio quality and potential damage.
- Оң терминал: Connect to the positive output of the ampөмүрлүү.
- Терс терминал: Connect to the negative output of the ampөмүрлүү.
- Импеданс: These woofers have a 3-Ohm impedance. Ensure your amplifier is stable at this load.

Сүрөт: каптал view of the HERTZ MP-165P3 woofer, highlighting the magnet structure and wiring terminals.
Иштөө нускамалары
Once installed, follow these guidelines for operating your HERTZ MP-165P3 woofers:
- Баштапкы кубаттоо: менен баштоо amplifier gain set to minimum. Gradually increase the volume and adjust amplifier settings to prevent distortion.
- Кроссовер орнотуулары: Өзүңүздү колдонуңуз amplifier's or head unit's crossover settings to filter out frequencies outside the woofer's optimal range (40 Hz to 5 kHz). This protects the speakers and improves sound clarity.
- Үндү көзөмөлдөө: Avoid excessive volume levels that cause audible distortion, as this can damage the speakers.
Техникалык тейлөө
Regular maintenance helps preserve the performance and appearance of your woofers:
- Тазалоо: Use a soft, dry cloth to clean the speaker cones and surrounds. Avoid harsh chemicals or abrasive materials.
- Текшерүү: Periodically check speaker connections for tightness and inspect the cone and surround for any signs of damage or wear.
- Экологиялык факторлор: While designed for car environments, extreme temperatures and direct sunlight can affect speaker longevity.
Проблемаларды чечүү
If you encounter issues with your HERTZ MP-165P3 woofers, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Үн жок | Loose wiring, amplifier off, incorrect source selection. | Check all wiring connections, ensure amplifier is powered on, verify audio source. |
| Distorted Sound | Amplifier gain too high, incorrect crossover settings, damaged speaker. | Кыскартуу amplifier gain, adjust crossover frequencies, inspect speaker for physical damage. |
| Алсыз бас | Incorrect wiring polarity, insufficient power, improper enclosure. | Verify wiring polarity, ensure adequate power from amplifier, check speaker enclosure for proper sealing. |
Техникалык шарттар
Detailed technical specifications for the HERTZ MP-165P3 Millie Pro 6.5" Mid-Bass Component Woofers:
- Өлчөмү: 165 мм (6.5 дюйм)
- Power Handling - Peak: 180 Вт
- Power Handling - Continuous: 90 Вт
- Импеданс: 3 Ом
- Жыштык жообу: 40 Гц – 5 кГц
- Сезимталдуулук: 93 дБ SPL
- Voice Coil Диаметри: 25 мм (1 дюйм)
- Магниттик материал: Феррит
- Конус материалы: Pressed-Pulp Cone with Cotton Fibers
- Айлана: "Boundary Free" Rubber Surround
- Себет: Low mounting depth, acoustically transparent aluminium alloy
- Элемент Салмагы: 5.3 фунт
- Продукциянын өлчөмдөрү: 19"D x 9"W x 15"H (Note: These dimensions seem to be for the package, not individual speakers. Refer to mounting depth for actual speaker fitment.)

Сүрөт: алдыңкы view of the HERTZ MP-165P3 woofer, showcasing конустун жана курчап турган.

Сүрөт: жогорудан төмөнгө view of the HERTZ MP-165P3 woofer, showing the full cone surface.
Кепилдик маалымат
This product comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or contact HERTZ customer support.
Кардарларды колдоо
For further assistance, technical support, or service inquiries, please visit the official HERTZ webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. боюнча көбүрөөк маалымат таба аласыз HERTZ Store on Amazon.
Продукт видеолору
HERTZ Dieci Series DCX-1653 Product Overview
Видео: Бул видео жалпы маалымат беретview of the HERTZ Dieci Series DCX-1653 speakers, highlighting features like the water-repellent cone, neodymium tweeter, and ferrite woofer magnet. It demonstrates the speaker's construction and mentions its 120W max output and optimized frequency response.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.