X-PRO X12 110cc Automatic Electric Start Dirt Bike Instruction Manual

1. Киришүү

This manual provides essential information for the safe assembly, operation, and maintenance of your X-PRO X12 110cc Automatic Electric Start Dirt Bike. Please read this manual thoroughly before using the vehicle to ensure proper handling and to prevent injury or damage.

Figure 1: X-PRO X12 110cc Dirt Bike (Orange color variant shown)

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Operating this vehicle under the age of 12 increases your chance of severe injury or death. NEVER permit children under age 12 to operate this vehicle.

Always wear appropriate safety gear, including a helmet, eye protection, gloves, and protective clothing. Ensure all riders are familiar with the controls and operation before riding. This dirt bike is designed for off-road use only and should not be operated on public roads.

• Ар дайым каска жана башка коргоочу шаймандарды кийиңиз.
• Never operate over speeds too fast for your skill or road conditions.
• Do not operate on public roads.
• Жабык мейкиндиктерде иштөөдө туура желдетүүнү камсыз кылыңыз.
• Regularly inspect the vehicle for loose parts, damage, or leaks.

Figure 2: Rider demonstrating proper safety gear and riding posture.

3. Монтаждоо боюнча нускамалар

Your X-PRO X12 Dirt Bike requires some assembly. Please follow these steps carefully. It is recommended to have a second person assist with certain steps.

3.1 Unboxing and Frame Disassembly

1. Carefully cut the straps securing the cardboard box.
2. Remove the top of the cardboard box to reveal the metal frame and packaged bike.
3. Using appropriate tools (e.g., impact wrench, wrench), remove the bolts securing the metal frame components.
4. Carefully remove the metal frame pieces.
5. Remove all packaging materials, including bubble wrap and zip ties, from the bike components.

3.2 Front Fork and Handlebar Assembly

6. Рулду бекитүү clampжогорку үчтүк cl үчүн samp. Ensure bolts are tightened securely.
7. Insert the front fork tubes into the triple clamps. Ensure they are oriented correctly (left and right).
8. Secure the front fork tubes by tightening the clamp bolts on both the upper and lower triple clamps.
9. Attach the handlebars to the handlebar clamps. Adjust for desired angle and tighten bolts.

3.3 Front Wheel and Brake Assembly

10. Attach the front brake caliper to the front fork.
11. Insert the wheel axle through the front wheel hub and the fork legs. Ensure any spacers are correctly positioned.
12. Secure the wheel axle with the appropriate nuts and washers.
13. Ensure the brake disc is properly aligned within the caliper.

3.4 Rear Shock and Chain Guard Assembly

14. Attach the rear shock absorber to its mounting points on the frame and swingarm.
15. Secure the chain guard in place, ensuring it does not interfere with the chain or wheel.

3.5 Battery Connection and Air Vent Hose

16. Батарея бөлүмүн, адатта отургучтун астына жайгаштырыңыз.
17. Connect the positive (+) and negative (-) terminals of the battery. Ensure connections are secure.
18. Locate the air vent hose on the engine. Remove the rubber cap and insert the hose back into the air vent. This prevents oil leakage during transport and is crucial for proper engine function.

3.6 Акыркы текшерүүлөр

• Verify all bolts and nuts are tightened to the manufacturer's specifications.
• Шинанын басымын текшериңиз.
• Ensure brake levers and throttle operate smoothly.
• Confirm the kill switch functions correctly.

4. Иштөө нускамалары

4.1 Pre-Ride Checklist

• Күйүүчү майдын деңгээлин текшериңиз.
• Inspect tires for proper inflation and condition.
• Тормоздун иштешин текшериңиз (алдыңкы жана арткы).
• Ensure throttle operates smoothly and returns to idle.
• чынжыр чыңалуу жана майлоо текшерүү.
• Confirm all fasteners are tight.
• Ensure the kill switch is accessible and functional.

4.2 Кыймылдаткычты от алдыруу (электрдик от алдыруу)

1. Күйүүчү май клапанын "ON" абалына буруңуз.
2. Эгерде кыймылдаткыч муздак болсо, дроссельди күйгүзүңүз.
3. Ачкычты от алдыргычка салып, аны "ON" абалына буруңуз.
4. Press the electric start button.
5. Кыймылдаткыч ишке киргенден кийин, кыймылдаткыч жылыган сайын дроссельди акырындык менен өчүрүңүз.

4.3 Ат минүү

The X-PRO X12 features an automatic transmission. To ride, gradually apply the throttle from a standing/starting position. Avoid sudden full throttle application, as this can cause the front wheel to lift, potentially leading to loss of control and serious injury.

Figure 3: X-PRO X12 Dirt Bike in an off-road environment.

5. Техникалык тейлөө

Regular maintenance is crucial for the longevity and safe operation of your dirt bike. Refer to the detailed maintenance schedule in the full owner's manual for specific intervals.

• Мунай алмаштыруу: Perform initial oil change after the first 5 hours of operation, then every 10-15 hours or as recommended.
• Аба чыпкасы: Аба чыпкасын үзгүлтүксүз тазалап же алмаштырып туруңуз, айрыкча чаңдуу шарттарда жүргөндөн кийин.
• чынжыр тейлөө: Жетектөөчү чынжырды таза, майланган жана тийиштүү түрдө тартылган абалда кармаңыз.
• Тормоздор: Inspect brake pads and fluid levels regularly. Adjust or replace as needed.
• Шиналар: Check tire pressure before each ride. Inspect for wear and damage.
• бекиткичтер: Periodically check all nuts and bolts for tightness.
• Свеча: Күнүмдүк техникалык тейлөөнүн бир бөлүгү катары от алдыргычты текшерип, тазалаңыз же алмаштырыңыз.

6. Кыйынчылыктарды

This section provides basic troubleshooting steps for common issues. For more complex problems, consult a qualified technician or contact customer support.

• Кыймылдаткыч ишке кирбей калат:
  • Күйүүчү майдын деңгээлин текшерип, күйүүчү май клапаны ачык экенине ынаныңыз.
  • Verify the choke is engaged if the engine is cold.
  • Ensure the kill switch is in the "RUN" position.
  • Check battery connections and charge if necessary.
  • Шамдын булганганын же бузулгандыгын текшериңиз.
• Күчтү жоготуу:
  • Check air filter for clogging.
  • Күйүүчү майдын сапатын жана агымын текшериңиз.
  • Шамды текшериңиз.
• Brakes Not Engaging Properly:
  • Тормоз суюктугунун деңгээлин текшериңиз.
  • Тормоз колодкаларынын эскиргендигин текшериңиз.
  • Bleed the brake system if air is present.

7. Техникалык шарттар

Сүрөт 4: Жакын пландан view of the X-PRO X12 engine and frame.

8. Кепилдик жана колдоо

X-PRO is committed to customer satisfaction and stands behind its products. For any questions regarding parts, service, or technical advice, please contact X-PROUSA customer support. They offer a dedicated after-sales team to provide prompt and reliable assistance.

For safety during transport, the air vent hose has been pulled out when the vehicle is packaged, and a rubber cap is used to block the air vent to prevent oil leakage during transportation. After receiving the bike, remove the rubber cap as shown in the picture and insert the hose back into the air vent. If you do not remove the rubber cap and insert the hose back into the air vent, any potential oil leak and engine damage caused by excessive internal pressure on the engine during use will not be covered by your warranty.

Figure 5: Illustration of the X-PRO X12's front and rear disc brakes.